Low coefficient of friction, material for overfired, fiber applications.
低磨擦系数，梨地，原丝用。
SBC linear guides have low coefficient of friction and excellent repeatability.
SBC直线导轨的摩擦系数小，具备良好的重复性。
Disclosed herein are compositions and systems having a low coefficient of friction.
本文公开了具有低摩擦系数的组合物和系统。
Self-lubricating rod bushing with a low coefficient of friction for smooth actuation.
自润滑连杆衬套的低摩擦系数平稳驱动。
Protection structure with blowout proof stem, low coefficient of friction bearings and so on.
阀杆采用防吹出保护结构，低摩擦系数的轴承等。
This surface has extreme hardness (60 RC. ), excellent wear and corrosion resistance, and low coefficient of friction.
这表面有极高的硬度（60局。），耐磨性和耐腐蚀性，低摩擦系数。
The tube surface has extreme hardness (60 RC.), excellent wear and corrosion resistance, and low coefficient of friction.
管表面有极大的硬度(60钢筋混凝土。)，良好的耐磨性和耐腐蚀性，低摩擦系数。
The low coefficient of friction of the SBC linear guide allows smaller drives to be used and contributes to energy savings.
由于SBC导轨摩擦系数小，可使驱动装置小型化，并同时减小电力损耗。
Their characteristics include an extremely low coefficient of friction, high resistance to pressure, very high shear stability and excellent protection against corrosion.
它们的特点包括一个非常低的摩擦系数，高的耐压力，非常高的剪切稳定性和优良的防腐蚀保护。
Fine structure of the nano-coating and knife body stronger adhesion, coating the surface more smooth, more sharp blade, process to achieve the low coefficient of friction.
微细的纳米结构令涂层和刀体附着力更强，涂层的表面更光滑，刀刃更加锋利，加工时达到较低的磨擦系数。
Diamond bearing with the air, oil and water, low coefficient of friction and high load rate characteristics, compared with some of the technical aspects of stainless steel bearings to be improved.
金刚石轴承具有在空气、油和水中摩擦系数低以及高负载率的特点，与不锈钢轴承相比一些技术方面有待提高。
Low friction-the coefficient of friction between the chip and tool should be low. This would allow for lower wear rates and better chip flow.
低摩擦系数—切屑与刀具间的摩擦系数应当较低。这会使磨损率较小及切屑流动更好。
Not surprising. You have no safety mat or adhesive stickers to allow for purchase on surface with a low coefficient of static friction.
你既没有防滑护垫也没有不干胶贴纸导致浴缸表层静摩擦系数低，因此摔倒也不足为奇。
Properly formulated plating solutions containing the right size particles dispersed in a suitable medium provide low coefficient of surface friction with outstanding wear resistance.
适当配比的镀液，加入拉径正确而又分散于适宜介质内的微粒，可提供表面摩擦系数低、耐磨性优异的镀层。
Under a wide range of P and V value, there are very low friction coefficient and wear, high dimensional stability for coating-metal pairs and no any damage during the test of nylon coating.
涂层在较大的P、V值范围内与各类配副均具有极低的摩擦系数和磨损量以及很高的尺寸稳定性；长期工作过程中，涂层未出现任何破坏现象。
The experimental tests show that the friction between cartilages in normal animal joints is very low and its coefficient of friction is in the range 0.002 to 0.02.
实验测定表明，正常动物关节内关节软骨之间的摩擦力是非常小的，其摩擦系数大约为0.002～0.02的范围。
Low coefficient of surface friction, besides properties of general modified polyes enameled round copper wire.
除具有普通的改性聚酯漆包线的特性外，还具有较小的表面摩擦系数的性能。
Advantages: good toughness, low friction coefficient of the ruby head, long life.
优点：有较好的韧性，宝石头部摩擦系数低，具有超长的使用寿命。
This paper introduces a reciprocating seal with high pressure and small size. The seal is composed of rubber V-ring and PTFE V-ring, and has long lifetime, good sealness and low friction coefficient.
本文介绍了一种用于高压小尺寸往复密封中，具有寿命长、密封性好、摩擦系数小的组合密封，即V型橡胶圈和V型PTFE圈组合密封。
The ceramic pushing plate has high reliability, long service life, and energy-saving effect because of the low surface friction coefficient and small rotational resistance.
陶瓷推力盘具有可靠性高使用寿命命长的特点，由于其表面摩擦系数低，转动阻力小，因而还具有节能效果。
It is of low friction coefficient, anti-wear, anti-corrosion and low noise, compact and light.
使用该项产品能降低成本、缩小机械体积、避免咬轴现象和降低机械噪音等优点。
Ceramics has good biocompatibility, low friction coefficient, and wear-resistance, but lined ceramics breakage affects long-term effect of ceramics to ceramics artificial hip joint.
陶瓷材料具有良好的生物相容性、摩擦系数低，磨损小，耐磨力强，但陶瓷内衬断裂影响了陶瓷对陶瓷人工髋关节的长期效果。
These kind of cutting tools have high hardness, good wear-resistance, low friction coefficient, can be used for high surface finishes machining of non-ferrous.
金刚石膜刀具和聚晶金刚石刀具硬度高，耐磨性好、磨擦性好、磨擦系数小、抗粘接性强，用于有色金属的高光洁度加工。
These kind of cutting tools have high hardness, good wear-resistance, low friction coefficient, can be used for high surface finishes machining of non-ferrous.
金刚石膜刀具和聚晶金刚石刀具硬度高，耐磨性好、磨擦性好、磨擦系数小、抗粘接性强，用于有色金属的高光洁度加工。
应用推荐