The principle of main circuit and control circuit is also discussed in this paper.
并介绍其主电路和控制电路原理。
The transformation contents of the main circuit and control circuit are introduced briefly.
简要介绍了主回路和控制回路的改造内容。
This article analyzes the main circuit and control circuit of the welder, also points out the troubleshooting and solutions.
对焊机主电路和控制电路进行了解析，给出了常见故障的处置和维修方法。
The main circuit and control circuit construction are introduced, the filtering principle and control strategy are discussed.
介绍了综合电力滤波系统的主电路和控制电路，分析了滤波原理及控制方法。
According to theoretical analysis and sign specifications for the system, this paper gives the system the main circuit and control circuit and the choice of parameters.
根据理论上的分析研究，针对给定指标，设计了系统主体电路和控制电路并进行参数的选择。
This paper introduces an active power filter device used for three phase four wire. The compensation principle and structure of main circuit and control circuit are given.
主要介绍用于三相四线制的有源电力滤波装置的研究工作，给出了系统的基本补偿原理、主电路及控制电路结构，并利用该装置进行了补偿实验。
Combining the main circuit and control circuit mathematical model of the functional modules of the transfer function, the mathematical model of the power stage is obtained.
将控制回路的各功能模块的传递函数与主电路的小信号模型相结合，即可得到电源系统的小信号模型。
The main structure of power supply, working principles of main circuit and control circuit are described in brief. At the same time, the software of the system is explained.
就其电源的主体结构，主电路的原理及控制电路的工作原理作了简要的论述，同时对系统的软件也进行了简要说明。
For the hardware, this paper deals with the designing and realization about the main control circuit and data acquisition circuit, and gives the method of debugging.
在硬件部分，论文详述了主控电路和数据采集电路的设计与实现，并给出了硬件调试的方法。
The design of main power sources structure, the control circuit for welding tractor and wire feeder, SCM control circuit and software for welding process are introduced in detail.
对该焊机的主电源结构、小车行走控制电路、送丝电路、单片机控制电路以及焊接过程控制软件等的设计作了较详细的介绍。
Next the design process of this power supply, which include the main circuit design, control and auxiliary circuit design, are introduced in detail.
接着详细介绍了电力操作电源的设计过程，包括主电路的设计以及控制电路的设计。
The third chapter mainly introduces the hardware design of soft starter, including the main circuit, control circuit, drive circuit, and protect circuit and auxiliary switched power design.
第三章详细介绍了软起动控制器的硬件设计，包括主电路、控制电路、驱动保护回路和辅助开关电源电路的分析和设计。
The main circuit consists of the switching power supply, the main control circuit, and the power circuit.
本课题硬件结构主要包括开关电源，主控电路、功率电路三部分。
The main circuit, control circuit and driving circuit of the developed device was studied and designed in the paper.
文中对所研制的焊接磁搅拌装置的主电路、控制电路、驱动电路进行了研究和设计。
Main circuit uses independent RC pulse generator and control circuit can control the main circuit based on 8051 single chip microcomputer and TC4427 high-speed power MOSFET driver.
其主电路采用了独立式RC脉冲放电回路，控制电路则通过8051单片机和TC4427高速MOSFET驱动器完成对主电路的控制。
Alternating-direct-alternating circuit is adopted and CPLD is used as logic control device of power IGBT in main circuit of variance-frequency timing system.
变频调速系统主电路采用交-直-交形式，以可编程逻辑器件(CPLD)作为调速系统逆变电路功率开关器件IGBT的逻辑控制器件。
The feeder circuit meets the demands of modular structure, and it can meet the needs in synchronism with the main control circuit.
该送丝电路符合模块化的电路设计思想，能够较好的与数字化主控电路实现同步。
The main control system includes the synchronous signal generating circuit, the testing circuit of thyristor cut-off voltage and the trigger circuit of the thyristors etc.
论述了主要硬件电路的设计方案，其中包括晶闸管两端电压检测、三相电源同步信号检测等。
The hardware design includes the SCR voltage regulating main circuit and the control circuit whose core is the PIC16C74 micro-controller.
系统的硬件设计包括晶闸管调压主电路设计和以PIC16C74单片机为核心的控制电路的设计。
The principle and adjustment result re of the main circuit, control circuit and program control circuit of our KLG-50 plasma arc cutting machine are introduced in this paper.
本文介绍了KLG - 50型空气等离子弧切割机的主回路，控制电路和程序控制电路的工作原理及调试结果。
It Includes the doubly-fed machine integrated control experimental system control cabinet design, the main circuit design and control circuit design.
包括双馈电机综合控制实验系统的控制柜设计，主电路设计及控制电路设计。
Based on DSP chip TMS320F2812, designed the circuit of the simulator, and contained the control circuit, the main circuit and the Operation circuit.
围绕DSP芯片TMS320F 2812，设计了模拟励磁系统硬件电路，包括主电路、操纵电路和控制电路。
The main control circuit sends 6 PWM signals. After the isolation and enlargement by the power circuit, these signals could drive the Permanent Magnet Synchronous Motor (PMSM for short).
主控电路发出6路PWM信号，经过功率电路隔离和放大，驱动交流永磁电机运转。
The structure and theory of main circuit, control circuit and protection circuit of modularized charge power supply composed by IGBT high frequency switch tubes are introduced in this paper.
介绍了利用高频开关管IGBT构成模块化充电电源的主电路、控制电路及保护电路的结构、原理。
The part on hardware consists of the main control circuit, environment data collecting, temperature measurement and alarm circuit, and power control circuit, etc.
其第一部分为硬件设计：主要控制电路、数据采集、测温报警、调功电路等组成。
This paper presents an intelligent Multi-Function Switch used in dig working face of coal mine, which be constituted by the main electric circuit and the control electric circuit.
本文介绍了一种煤矿掘进工作面用智能型组合开关，由主电路和控制电路组成。
Have carried on the detailed parameter design to the phase-shifted Full-Bridge soft switching power supply main circuit and the control circuit.
对移相全桥软开关电源主电路和控制电路进行了详细的参数设计。
Have carried on the detailed parameter design to the phase-shifted Full-Bridge soft switching power supply main circuit and the control circuit.
对移相全桥软开关电源主电路和控制电路进行了详细的参数设计。
应用推荐