The use of motor speed control, automatic cycloid.
采用可调速电机，自动摆线。
The DC motor speed control system for providing an effective way.
对于直流电机速度控制系统的实现提供了一种有效的途径。
Use LCD1602 to display the two groups of motor speed control information.
使用LCD 1602来显示两组电机的调速信息。
It can be used to provide blocking protection to a specific DC motor speed control system.
用此方法对一个直流电机数字控制调速系统进行堵转保护。
DSP-based variable frequency AC motor speed control system, he is more use of the procedure.
基于DSP的交流电动机变频调速控制系统，他是比较使用的程序。
In this paper, a DC motor speed control system based on fuzzy controller theory is introduced.
本文主要介绍了以模糊控制理论为基础的直流电机调速模糊控制系统。
It is equipped with electromagnetic motor speed control, electronic counters, cutting machine.
该机配备电磁调速电机、电子计数器、割纸机。
This is the brushless DC motor speed control procedures, written in assembly language. apply to TMS320LF2407A DSP.
这是无刷直流电动机调速控制程序，汇编语言编写，适用于TMS320 LF 2407a的DSP。
SCM control of permanent magnet brushless DC motor speed control system applicable to electric bicycles, and other low-power work.
摘要单片机控制的永磁无刷直流电动机调速系统适用于电动自行车等小功率的工作情况。
A brief introduction of the variable frequency AC motor speed control features, pointed out that the centrifugal pump inverter transformation of the economy.
简单介绍了交流电动机的变频调速特点，指出采用变频器改造离心式水泵的经济性。
A kind of PID controller with fuzzy algorithm setting on-line PID parameters automatically was designed and applied in brushless DC motor speed control system.
通过设计一种模糊pid控制器，应用模糊算法在线自动整定PID参数的方法，将其应用于无刷直流电动机调速控制系统。
The paper presents two kinds of algorithms for two kinds of controller structure and the paper gives the result of experiment on DC motor speed control system.
文中分两种情况给出了两种控制器结构及相应的算法，最后示出了在调速系统上的实验结果。
The speed control driving for fan-type load can save much energy, but it is not popularized for lack of simple, reliable and economical motor speed control device.
风机类负载采用调速驱动可节约大量能量，但由于缺少简单、可靠、经济的电机高速装置，该技术基本没有推广。
The platform verified that the proposed variable load DC Motor Speed Control System with nonlinear state space model and parameter identification method is effectiveness.
利用该平台验证了提出的变负载直流电机双闭环调速系统的非线性状态空间模型及其参数辨识方法的有效性。
Another kind of the voltage control mode, through the high and low voltage on motor speed control, motor feedback signal through the drive to the numerical control system feedback position control.
另一种采用电压控制方式，通过电压的高低进行电机的转速控制，电机的反馈信号通过驱动器反馈到数控系统进行位置控制。
Also, the implementation of the hardware and software for speed control and protection with the results obtained from tests on induction motor performance is provided.
基于发动机感应性能测试结论，为速度控制和保护而工作的软、硬件实现也在本文中被阐述。
Direct control of torque over the motor speed range is provided by the drive, which helps the motor and drive generate torque levels high enough to cycle the press back to ready position.
直接控制扭矩而不是电机转速范围，可以使得电机和变频器产生足够高的扭矩使得压机可以回复到原来的位置。
Allows you to understand how to realize the speed of motor control.
能让你明白如何实现对电机速度的控制。
With the speed controller on the push handle the attendant can easily control the motor power while guiding the chair.
随着对随之而来的推手柄可以方便地控制电机功率，同时指导椅子速度控制器。
This paper analyzes theoretical points of the implementation for high performance control of induction motor without speed sensor.
文章分析了交流感应电机无速度传感器的高动态性能控制方案的控制要点。
With this information, control can send speed up or slow down commands to the disc drive motor.
根据这些个信息，控制系统可以向盘片驱动系统发送提速或降速的指令。
At the same time using Holzer sensors will be converted into pulse frequency motor speed feedback to the MCU, realize the speed closed-loop control, to achieve speed detection.
同时利用霍尔传感器将电机速度转换成脉冲频率反馈到单片机中，实现转速闭环控制，达到转速检测目的。
Due to the large torque ripple of inductance motor based on direct torque control, especially at a low speed, this paper proposes a new control strategy.
针对基于直接转矩控制的感应电动机在低速运转时存在较大的转矩脉动问题，该文提出一种新的控制方法。
The operation of the stepper motor control the speed of paper, stepper motor if the device is not in place, the same will lead to abnormal paper speed.
步进电机的运转操控着走纸的速度，步进电机假如装置没有到位，同样会到致使走纸速度反常。
Due to the large torque ripple of inductance motor based on direct torque control, especially in a low speed, this paper proposes a new control strategy.
针对基于直接转矩控制的感应电动机在低速运转时存在较大的转矩脉动问题，提出一种新的控制方法。
We adopt vector control function with LG inverter, can make the motor in the low speed can also provide meet the need of the load torque.
我们采用具有矢量控制功能的LG变频器，可使电机在低速时也能提供满足负载需要的转矩。
We adopt vector control function with LG inverter, can make the motor in the low speed can also provide meet the need of the load torque.
我们采用具有矢量控制功能的LG变频器，可使电机在低速时也能提供满足负载需要的转矩。
应用推荐