The microstructure and the phase composition of the alloy were analyzed through optical microscopy, SEM, EDAX and XRD techniques.
通过光学显微术、SEM、EDAX、XRD技术分析了热等静压对材料的显微组织和相成分的影响。
The braze and interfacial microstructures were characterized by optical microscopy, scanning electron microscopy, and energy dispersive spectroscopy.
在钎焊和界面微观结构的特点是光学显微镜，扫描电子显微镜和能谱。
Optical microscopy, 13c NMR and ATR-FTIR were used to study the mechanism of transdermal enhancers.
本论文还通过光学显微镜、13cNMR及ATR - FTIR等手段探讨透皮促进剂的作用机理。
Confocal scanning optical microscopy (CSOM) includes transmission type and reflection type as well as coherent incident light type and incoherent fluorescent light type.
共焦扫描光学显微(CSOM)系统有透射式和反射式、相干光和非相干光荧光等类型。
It has been shown by optical microscopy, electron microscopy and chemical analysis that such glaze has the property of physicochemical immiscibility.
使用光学显微术、电子显微术和化学分析证实这种釉具有不混溶性的化学本质。
Objective To investigate the diagnosis efficacy of using ordinary optical microscopy to identify the source of hematuria.
目的探讨应用普通光学显微镜观察尿红细胞形态以判断血尿来源的诊断效能。
The abnormal block and black round structure of 50 axletree steel was studied and analyzed using optical microscopy, transmission electron microscopy, electron probe and so on.
用光学显微镜、透射电子显微镜以及电子探针等现代材料试验手段对50钢中存在的大块黑色团状异常组织进行了研究和分析。
The phase compositions and characteristics of glass-ceramics products were determined by the comprehensive methods such as optical microscopy, X-ray diffraction, physical and chemical properties test.
通过光学显微分析、X射线衍射分析、物理化学性能测试等手段确定了微晶玻璃的物相组成及性能特征。
Near-field optical microscopy, based on scanning sample surfaces by the tip of optical probe, obtained the imagined information about the object surface.
近场光学显微镜是利用探针的扫描来获得样品表面信息的。
The microstructure and properties of the composite coatings were investigated by optical microscopy, X-ray diffractometer, electron probe microanalyzer and a skimming wear machine.
利用金相显微镜、X射线衍射仪、电子探针及滑动磨损试验机，研究了合金熔覆层的显微组织及性能。
In order to improve the experimental teaching quality of morphology, the traditional mono-functional optical microscopy is updated by the digital microscope mutual system.
为了提高形态学实验课的教学质量，将以往组织学教学中所使用的功能单一的传统光学显微镜更新为显微数码互动系统。
The effects of the polymer network on the packing arrangement of the ferroelectric liquid crystal molecules are examined by means of optical microscopy.
通过光学显微镜可观察聚合体网络对铁电液晶分子组合排列的影响。
Using ODF's analysis, the micro-orientated flowing behavior of magnesium alloy AZ31 by forging was investigate, and using optical microscopy, the grain size and microstructure were measured.
为了解az31镁合金自由锻过程中织构的形成和变化，用odf分析对AZ31镁合金在自由锻时的微曲向流变行为进行了分析；用光学显微镜对其显微组织和晶粒尺寸进行了测定。
The plated sheet can be used to prepare the specimen for optical microscopy, SEM and TEM, it can also be used for the heat-treatment and the microhardness test of the powders.
电镀薄片可以用来制备光学显微镜、扫描电镜及透射电镜的观察样品，而且可以用来进行粉末的热片进及业余末的显微维氏硬度测试等实验。
The thermal properties and crystallization behaviors were studied by means of differential scanning calorimetry (DSC), thermogravimetry (TG) and polarizing optical microscopy (POM), respectively.
用示差热分析（DSC），热重分析（TG）和偏光显微镜（POM）研究了材料的热性能和结晶行为。
Both the diffusion couple specimens and the alloys were examined by means of optical microscopy, scanning electron microscopy, and electron probe microanalysis.
扩散偶和合金样品采用光学显微镜、扫描电镜和电子探针显微分析技术进行分析。
The macrostructure and microstructure of the solidified samples was observed by digital camera and optical microscopy, respectively.
利用光学显微镜和数码相机对凝固试样的宏观及微观组织进行观察。
Scanning near-field optical microscopy (SNOM) is a novel tool for the research down to nanometer scale.
扫描近场光学显微镜(SNOM)是一种能探测纳米尺寸的新型显微工具。
Effects of tin on the microstructure and mechanical properties of ZA62 alloys were investigated using optical microscopy, XRD analysis and tensile test.
采用金相显微镜、X射线衍射仪等分析测试手段，研究了锡对ZA62合金显微组织及力学性能的影响。
Confocal scanning optical microscopy (CSOM) is a high precision microscopical image system which based on the confocal principle, scanning technology and image processing.
共焦扫描显微成像系统(C SO M)是以共焦原理为基础，集扫描技术和数字图像处理技术为一体的高精度的成像系统。
Microstructure of simulated coarse grain heat affected zone (CGHAZ) of Zr Microalloyed HSLA Steel are investigated using optical microscopy and transmission electron microscopy.
采用光学显微镜和透射电镜研究了锆处理对微合金钢粗晶热影响区组织的影响。
The quenching sensitivity of 7050 aluminium alloy hot-rolled plate was studied by using end quenching test and optical microscopy (OM) and transmission electron microscopy (TEM).
用末端淬火、光学金相显微镜和透射电镜技术研究7050铝合金热轧板的淬火敏感性。
The rib fractography of cross-linked PMMA has been explored by optical microscopy.
用光学显微镜观察了交联有机玻璃断面上的肋状形态。
The effect of electric field on the recrystallization and recrystallization texture development in cold-rolled copper was studied by X-ray diffraction (ODF analysis) combined with optical microscopy.
利用X射线衍射技术并结合金相组织观察和显微硬度实验，研究了冷轧工业纯钢在电场作用下的再结晶及织构演变规律。
The essential principle and system structure were compared in common optical microscopy and near field optical microscopy. It is introduced that methods of the fabrication of optical fiber probes.
分析了传统光学显微镜与近场光学显微镜成像原理的物理本质和两种显微镜系统结构的异同点。
A simple dynamic chemical etching device based on siphon principle is developed for fabrication of optical fiber probes which are commonly used in near-field optical microscopy.
基于虹吸原理，设计了一种动态化学腐蚀法的简易装置，用于制备近场光学显微镜光纤探针。
The transmitting and reflecting optical microscopy has been used in the electrolytic polishing process for monitoring the polished specimen to obtain the optimum polishing condition.
在电解抛光过程中用透射和反射光作显微镜观察，借以监视抛光样品，使获得最佳抛光条件。
The morphology of as-grown crystal surface was investigated by optical microscopy.
用光学显微镜观察了晶体生长面的原生形貌。
The morphology of as-grown crystal surface was investigated by optical microscopy.
用光学显微镜观察了晶体生长面的原生形貌。
应用推荐