Safety relief valve is used to protect the machine and operator shall not be adjusted.
溢流阀是用来保护机器和操作人员的安全的，不得任意调整。
Remove the relief valve hose from fitting below inlet ball valve.
从进口球阀下面连接件拆卸安全阀软管。
The structure and principle of needle valve cushion and relief valve cushion were introduced.
本文介绍了针阀式缓冲气缸和溢流式缓冲气缸的结构及工作原理。
Clean, adjust relief valve -, check for worn and dirty valve.
清洁，调节安全阀，检查是否有磨损和肮脏的阀门。
Thoroughly clean all inside surfaces of the relief valve body.
彻底清洗安全阀阀体的所有内部表面。
Relief Angle valve. Pressure or vacuum can be specified.
安全角阀。可指定压力或真空度。
Slide one half of the splash guard into the groove on the relief valve body.
将防溅保护的一半滑动到安全阀阀体的沟槽上。
Damage or fouled relief valve seat.
安全阀阀座损坏或受到污染。
Purpose: To test operation of pressure differential relief valve.
目的：检测差压安全阀的工作性能。
Remove the pressed in relief valve seat and seat O-ring.
拆卸压进去的安全阀阀座和阀座o形环。
Damaged or fouled relief valve seat.
安全阀阀座受到损坏或污染。
安全角阀。
Over pressurization can result in a water discharge from the Relief Valve.
压力过大会导致水从安全阀排放出去。
Remove the relief valve cover, stem/diaphragm assembly, and relief valve spring.
拆卸安全阀阀盖，阀杆/隔膜总成，和安全阀弹簧。
An O-ring seals the relief valve body to the main housing.
用一个O形环密封安全阀阀体与主外壳。
There must be no valve between the relief valve and heater.
在安全阀和热水器之间不能够安装任何阀门。
The principal conclusions have the important value for the design of direct digital relief valve.
主要结论对直接数字式溢流阀的设计具有重要的指导意义。
Record this as the opening differential pressure of the relief valve.
将这个读数记录为安全阀的开启差压。
Install the high pressure relief valve in the compressor manifold fitting.
在压缩机歧管配件里安装高压释放阀。
The unique relief valve construction incorporates two channels: one for air, one for water.
独特的安全阀结构，具有两个渠道：一个用于空气，一个用于水。
调整安全阀。
Place the relief valve seat back into the chamber bore.
将安全阀阀座放回到镗孔内。
Relief valve Settings should be set as low as practical.
安全阀应以实际低压力值进行设置。
Two-stage pressure relief valve with provision for remote control.
带远程控制装置的两阶段减压阀。
Install relief valve cover nut and tighten.
安装安全阀阀盖螺母，并加以紧固。
Never plug a Safety Relief Valve.
不要堵塞安全阀。
With the application of pressure relief valve, it needs certain time.
由于采用了减压阀，阀门关闭需要时间。
Do not plug the temperature and pressure relief valve.
不要把降温减压安全阀塞住。
The appearance of oxygen and pressure relief valve works.
氧气减压阀的外观及工作原理。
Place the screw back into the relief valve disc and tighten.
将螺丝放回到安全阀阀瓣内，并加以紧固。
应用推荐