The formulation of acrylic polyurethane coatings and test results were listed.
列举了高固体分丙烯酸聚氨酯涂料配方及其性能检测结果。
The curing courses of polyurethane coatings were observed with IR spectrometry.
通过红外光谱技术,观察了涂料的固化情况。
The paper introduced the technical progress in air curing fluorinated polyurethane coatings.
介绍了常温固化含氟聚氨酯涂料的研究进展。
This article has briefly described the trimerization technology for reduction of residual TDI in polyurethane coatings.
简要介绍了降低聚氨酯涂料中游离tdi含量的三聚法。
Synthesis of soluble fluorinated alkene with hydroxyl and preparation of fluorinated polyurethane coatings were described.
本文介绍了可溶性的带羟基含氟烯烃的合成及含氟聚氨酯涂料的制备。
The structure of the prepolymer is characterized. The properties of prepolymer and its acrylic polyurethane coatings are discussed.
对合成预聚体的结构进行了表征,并对预聚体及其丙烯酸聚氨酯涂料的性能进行了研究。
The applications of new oxazolidine-based compounds in the polyurethane CASE material, especial in polyurethane coatings are introduced.
介绍了新型唑烷化合物在聚氨酯弹性体类材料特别是在聚氨酯涂料体系中的应用。
The results show that the organometal catalysts are suitable for the polyurethane coatings, and the tertiary amine catalysts are not suitable.
结果表明,有机金属类催化剂可用于催化本体系,而胺类的催化剂不合适;
The preparation conditions of silver particle and the influence of its addition proportion upon the antibacterial action of the polyurethane coatings were also reviewed.
讨论了银粒子的制备条件,及其加入聚氨酯涂料中的比例对涂料抗菌性能的影响。
The characteristics and applications of high-solid alkyd coatings, epoxy coatings, polyester coatings, acrylate coatings and polyurethane coatings are specifically discussed.
详细阐述高固体分醇酸树脂涂料、环氧树脂涂料、聚酯树脂涂料、丙烯酸树脂涂料以及聚氨酯涂料的特点和应用。
The paper analyzes some phenomena, mechanism and reasons of polyurethane coatings' foaming during the production and construction some preventives and solutions are put forward.
对聚氨酯涂料在生产和施工过程中起泡的形成、机理及原因进行了分析,并提出了预防与解决起泡的方法。
A high solids acrylic polyurethane coatings by use of a polyester oligomer as plasticizer has been prepared, which can lead to a higher application solids and excellent film performance.
采用低分子量聚酯齐聚物作为丙烯酸树脂的增塑剂,配制高固体分丙烯酸聚氨酯涂料,不仅提高涂料的施工固体分,涂膜的性能也优异。
The polyurethane prepolymer clear coatings based on PAPI and castor oil was prepared. It is a sort of moisture curable one-component polyurethane coatings, which has protection function.
由多异氰酸酯PAPI与蓖麻油反应制得预聚体清漆,它是一种湿固化型聚氨酯防腐涂料。
So should avoid latex coatings and polyurethane resin coating and construction, had better be in polyurethane resin coating completely dry brush again latex coating, can avoid the yellow phenomenon.
因此应避免乳胶涂料和聚氨酯树脂涂料同时施工,最好是在聚氨酯树脂涂料完全干燥后再刷乳胶涂料,可避免泛黄现象。
The adhesion of Marine bacteria on three antifouling coatings based on waterborne polyurethane was studied by using scanning electron microscope and Bactoscan FC.
利用平板计数法、扫描电镜等实验研究了海洋细菌在三种水性聚氨酯防污涂层上的附着。
Polyurethane antibacterial coatings were prepared with silver particle antibacterial agent.
以银粒子为抗菌剂制备聚氨酯抗菌涂料。
According to the requirement of coatings, yellow zine epoxy primer and two - pack high solid acrylate polyurethane coating are chosen to be containers paints.
根据涂层的要求,选择了锌黄环氧底漆和双组分高固体丙烯酸聚氨酯漆作为厢体的涂料。
Organosilicon can also be used as a modifier of polyurethane, be applied in the area such as coatings, adhesives, sealants, the coating agents, textile treatment agents, etc.
有机硅化合物还用作聚氨酯的改性剂,用于涂料、胶粘剂、密封剂、涂饰剂、织物整理剂等领域。
A heat insulating and anti-corrosive acrylic polyurethane paint for exterior of petroleum storage tank is introduced. The coatings system and application process are described.
介绍了一种丙烯酸聚氨酯类石油储罐外壁隔热防腐涂料,并对涂料配套体系、施工工艺加以说明。
Briefly introduced the current development situation of polyurethane waterproof coatings at home and abrood. and the developing trends.
简要介绍了聚氨酯防水涂料的国内外概况以及发展趋势。
The new development of water-borne polyurethane and acrylic wood coatings were reviewed. The status and problems of water-borne wood coatings were analyzed, and the trend was presented.
对水性聚氨酯和水性丙烯酸木器涂料进行了详细介绍。分析了水性木器涂料的研究现状及存在问题,提出了相关的发展趋势和研究方向。
Polyurethane (PU) coating is one of the high-grade coatings.
聚氨酯(PU)涂料是一种高档涂料。
The article introduces "911" polyurethane waterproofing coatings, including main ingredients, film-forming mechanism, key points for production as well as how to choose and buy.
介绍了“911”聚氨酯防水涂料的主要成分、成膜原理、生产要点及选购注意事项。
At present, alkyd, epoxy resin, polyurethane resin, acrylate and varieties of their modified resins are better domestic resins for waterborne coatings.
目前国内性能较好的水性涂料基料树脂主要是醇酸树脂、环氧树脂、聚氨酯树脂、丙烯酸树脂及它们的改性树脂品种等。
Polyurethane surface coatings are applied as sealants to wood, concrete, and machine parts.
聚氨酯表面涂料可作为木材、水泥以及机器零件的密封剂。
Polyol designed for use in polyurethane manufacturing for printing ink and coatings.
丙烯酸多元醇为印刷油墨和涂料制造中使用的聚氨酯所设计。
The degradation of two coatings systems based on polyurethane and acrylic were studied by exposed in UV-condensation chamber and salt-fog chamber alternately.
采用盐雾和紫外-冷凝室内人工加速老化循环试验的方法,对聚氨酯和丙烯酸两种典型的船壳涂料进行人工加速老化试验。
The properties of the one component asphalt based polyurethane waterproof coatings were introduced.
介绍了这种单组分石油沥青聚氨酯防水涂料的性能。
The properties of the one component asphalt based polyurethane waterproof coatings were introduced.
介绍了这种单组分石油沥青聚氨酯防水涂料的性能。
应用推荐