The influence of preparing pulverized coal system on electrical energy consumptions is analyzed.
分析了制煤系统各种因素对电能耗率的影响。
Monitoring and control the material levels of tube mill validly is the key of optimized operation, energy-saving and consumption-reducing in pulverized coal system.
有效的监测及控制低速钢球磨煤机的料位，是制粉系统实现优化运行、节能降耗的关键。
It is successfully applied to the pulverized coal system in power plant to reduce electric energy consumption, and may become an effective way to decrease generation cost and save energy.
用该方法确定电厂制粉系统的最优运行方式，可有效地降低制粉电耗，是发电厂降低运行成本和节能的有效途径。
The paper analyze and outline the process of pulverized coal milling system with intermediate storage bunker, and introduce system's operation.
阐述了中储式制粉系统的构成以及工艺过程，并对中储式制粉系统的运行作了介绍。
The concept of furnace combustion management through introduction on line monitoring system with pulverized coal burner was put forward.
通过介绍煤粉燃烧器在线监测系统，提出了炉膛燃烧管理这个概念。
This paper also briefs the control strategy and features of combustion control system adopting pulverized coal concentration to achieve equilibrium combustion.
介绍煤粉浓度均衡燃烧控制系统的控制策略及特点。
Model NGF powder feeder with internal gate and leakproofness is a major pulverized coal feeding equipment in combustion system of power plant to feed coal into boiler continuously and evenly.
ngf型内启闭无泄漏给粉机是火力发电厂锅炉燃烧系统主要的给粉设备，能把煤粉连续、匀地供给锅炉燃烧系统。
Compared with conventional system, the system for conveying and combustion of high density pulverized coal has obvious advantages is aspects of transportation, combustion stabilization.
与常规系统相比，高浓度煤粉输送燃烧系统在输送、稳燃和环保方面具有显著的优越性。
Based on these two methods, two ways for pulverized-coal system design and selection are also suggested.
根据这两种方法，本文还提出两种设计和选择制粉系统的方法。
The proposed design method of new concentrated thin burners provides the basis for the design of pulverized coal feeding system.
提出了新的煤粉浓淡燃烧器设计方法，为输粉系统设计提供了依据。
The continuity and reliability of pulverized coal weighing in serial-tank PCI system mainly depends upon its weighing technology.
重叠罐式喷煤计量是否连续、可靠在很大程度上取决于喷煤计量工艺。
Operation showed that, this control method could improve the reliability and economics of pulverized coal preparation system.
运行表明，此控制方法可提高制粉系统的可靠性和经济性。
The pulverized coal injection system is the main electric equipment that be special stress on protecting for the rotary kiln.
煤粉喷吹系统为回转窑重点保护的主要电气设备。
A coal-fired boiler Combustion Visualization, Forecasting and Analyze System is developed and realized on a 200MW pulverized coal-fired power station in HeBei Province.
以河北南网某电厂200MW燃煤机组为实时在线分析对象，初步实现了200Mw燃煤锅炉燃烧稳定性的可视化监视及分析预测。
The principle of light fluctuation is presented, on which a novel system for on-line monitoring pulverized coal stream was developed by authors.
介绍了光脉动法的基本原理，及基于该原理开发的可用于直吹式和中间仓储式煤粉制粉系统的煤粉粒度和浓度实时在线监测系统。
The concentration distribution of pulverized coal in blowpipe of blast furnace was measured in an isothermal two-phase model by means of a computer measuring system based on infrared transmission.
利用开发的红外透射法粉体浓度计算机测定系统，在高炉氧煤喷吹气-固两相流动模拟装置上测定了氧煤枪的煤粉浓度场。
The ECT system with single measurement channel is applied to the process measurement of pneumatic conveying of pulverized coal.
将单检测通道电容层析成像系统应用于煤粉气力输送的过程检测中。
This paper shows existence major problem and provides reform envisagement through the analysis of automatic combustion control system of pulverized fuel boiler flowing pulverized coal by hot air.
通过对热风送粉煤粉炉燃烧控制系统的分析，指出了该系统存在的主要问题，提出了该系统的改造设想。
The Steam-injection Boiler Burning Pulverized Coal Control System has been built using ADAM5510 in order to reduce the fuel cost.
为降低稠油热采燃料成本，利用ADAM5510构建了燃煤注汽锅炉控制系统。
According to the demands of ball mill coal pulverized system, inverse matrix decoupling theory, a traditional decoupling method, is used in the system control, and a PID controller is designed.
本文首先根据中储式球磨机制粉系统对控制精度要求不高的特点，将传统解耦方法中的逆矩阵方法应用于制粉系统解耦中，设计了基于逆矩阵静态解耦的PID控制系统。
Plasma ignition technology is applied to a dual-in dual-out direct-fired system, which satisfied pulverized-coal concentration requirements and practical operating conditions.
等离子点火技术应用于双进双出磨直吹式制粉系统时，能满足等离子点火浓度的技术及运行实况。
Plasma ignition technology is applied to a dual-in dual-out direct-fired system, which satisfied pulverized-coal concentration requirements and practical operating conditions.
等离子点火技术应用于双进双出磨直吹式制粉系统时，能满足等离子点火浓度的技术及运行实况。
应用推荐