In recent years it has become a trend of semi-solid forming technology.
近些年来已经成为了半固态成形技术的发展趋势。
Semi-solid forming; Al-Pb Alloy; Mechanical agitation; Temperature; Solid fraction;
半固态成型；铝铅合金；机械搅拌；温度；固相率；
Semi-solid forming of EMS is one of mature methods, and it has been used in industry.
半固态电磁搅拌法是半固态成形技术中较为成熟的方法之一，并已开始应用于工业生产中。
Original AZ61 magnesium alloy does not fit to the requirements of semi-solid forming.
未预变形az61镁合金不宜进行半固态制坯。
Features, principles, substance and present situation of research and application of semi-solid forming of EMS have been summarized.
文章综述了电磁搅拌技术的特点、原理和实质，以及当前电磁搅拌技术的研究及应用现状。
Semi-solid forming is one of new types of material processing. This paper analyses the present and the future of this new forming technology.
半固态加工是金属材料成形领域中的一种新工艺。本文分析了铝合金半固态成形技术的现状及发展趋向。
In this paper, the tube hydro-forming technology, the semi-solid forming technology are induced, which widely used to product auto-chassis p.
主要针对广泛应用于汽车底盘的管材液压成形技术、半固态成形技术进行了介绍，并将这些技术的开发情况、应用情况、设备等情况进行了概述。
The effects of the filling velocity and gate shape and located position on semi-solid forming quality and flow patterns were investigated with simulation.
对不同充填速度、浇口形状以及浇口设置位置下半固态成形过程进行模拟分析。
The research prog ress of semi-solid forming magnesium alloys at present was reviewed in this paper, and the prospect of its industrial application was viewed.
综述了目前国内外镁合金半固态成形技术的研究及其应用现状，展望了镁合金半固态成形技术在我国的发展前景。
Semi solid forming is one of new types of material processing.
半固态加工是金属材料成形领域中的一种新工艺。
By using sheathed extrusion technique, the bonding and forming of stainless steel and semi solid aluminum alloy are successfully realized.
采用包套挤压成形方法，成功地实现了不锈钢与半固态铝合金的连接与成形。
For semi solid metal forming, it is crucial to produce semi solid metal materials that have non dendritic structure.
半固态金属成形技术的关键是制备非枝晶结构的半固态金属材料。
Semi solid metal forming as a new near net shape technology in 21 century generally attracts people's attention.
金属半固态成形作为21世纪一种近净成形新技术，愈来愈引起人们的广泛关注。
Result of research shows that proper technology of induction heating satisfies the technologic request in semi-solid metal forming.
研究结果表明，适当的感应加热工艺能满足金属半固态成形技术中的二次加热的技术要求。
The effects of strain rate and engineering strain on liquid phase segregation in the process of semi-solid metal forming have been revealed in this paper.
揭示了半固态金属成形过程中应变率和变形量对液相偏析影响的规律。
The effect of forming temperature, injection pressure and piston velocity on the filling ability of semi-solid A356 aluminum alloy slurry were investigated.
研究了半固态A356铝合金浆料的成形温度、压射比压和压射冲头速度对半固态A356铝合金流变压铸充填性的影响。
A die with internal lining ceramics coat was made by using this technology. Then a semi-solid aluminum alloy forming experiment was made in the die.
应用自蔓延技术制备了带有陶瓷内衬涂层的模具，并应用该模具进行了简单的半固态铝合金加工实验。
Semi-solid metal forming technology is a new metal forming technology and it is a forming technology with enormous developmental potentiality.
半固态金属成形技术作为一项新兴的金属成形技术，是一种具有巨大发展潜力的加工技术。
The fabrication of semi -solid stock and subsequent forming, priority of this technique were discussed.
对半固态合金料的制备、成形方法及其优越性进行了讨论。
Semisolid metal processing technology is regarded as one of the near-net shape forming technologies with wide application in 21 century, and the preparation of semi-solid slurry is the key technique.
半固态金属加工技术被认为是21世纪最具有发展前途的近净成形技术之一，其关键环节是半固态浆料的制备。
Semi-solid casting is a new kind of materials forming technique, the products having low cost, high production rate and high quality can be obtained using semi-solid casting technique.
半固态铸造是一种新的材料成形技术，采用半固态铸造技术成形可以实现产品的低成本、高产出及高质量。
The mechanical property of the hypoeutectic high chromium cast iron extrusion samples was analyzed after extruded by semi-solid rheocasting forming.
分析了亚共晶高铬铸铁半固态浆料进行流变挤压成形后挤压件的力学性能。
The author suggested that the forming temperature of semi-solid ingot should be controlled in a small range and kept equably.
认为半固态锭料的成形温度必须控制在较小的范围内，且锭料温度须保持均匀，建议采用中频加热和分段控制温度；
There were many advantages in semi solid metal forming technology. Specialist believed it would become the key metal manufacture technology in 21 century.
半固态金属成形技术具有许多优点，被专家们称为2 1世纪新兴的金属制造关键技术之一。
The greatest advantage of semi-solid rheological forming process is that process flow short, low production costs, in line with the requirements of energy-saving and emission reduction.
半固态流变成形的最大优势是工艺流程短、生产成本低，符合当今时代节能减排、绿色铸造的要求。
When the mice were sacrificed, tumor weight was measured, and the assay of colony forming unit-granulocyte and macrophage (CFU-GM) was performed on semi-solid culture.
裸鼠处死时测量肿瘤重量，用半固体培养基进行粒—巨噬细胞集落形成单位(CFU - GM)实验并检测血白细胞、丙氨酸转氨酶和肌酐等。
Semi-solid metal forming is a hot research point of the metal processing technology in recent years.
半固态金属加工是近年来金属加工技术研究的热点。
At the same time, the forming mechanism of semi-solid structure prepared by the novel machine was...
同时，对新型装置制备半固态组织的机理进行了研究。
At the same time, the forming mechanism of semi-solid structure prepared by the novel machine was...
同时，对新型装置制备半固态组织的机理进行了研究。
应用推荐