The second is the hydraulic pressure servo-control system.
第二种是液压伺服控制系统。
SPOILER is installed on the piston rod of each servo-control.
在每个伺服控制器活塞杆上安装扰流板保险卡箍。
Using this method can realized stable servo-control and higher speed machining.
并且应用该方法实现了稳定的伺服控制，提高了加工效率。
In this paper, a DC brushless motor servo-control system based on DSP is designed.
本文设计了一种基于DSP的直流无刷电动机伺服控制系统。
Due to the large torque coefficient, small torque ripple and ease of control, permanent magnet synchronous motor (PMSM) system has been widely used in many accurate servo control systems.
永磁同步电动机系统具有力矩系数大、力矩波动小以及控制灵活等优点，在许多精密伺服控制系统中得到广泛应用。
The emphasis is application research of position servo control system in squirming robot based on pneumatic columnar elastic shell actuator in this article.
本文的重点是基于气动橡胶驱动器的蠕动机器人位置伺服控制系统的应用性研究。
For Brushless DC (BLDC) servo control, optional 3 phase commutation tracks replace the traditional Hall Effect sensors.
无刷直流(BLDC)伺服控制，可选的3相换轨取代传统的霍尔效应传感器。
Along with the gradual improvement of the servo control technology, the servo drive unit is gradually becoming the main force of the drive unit, servo drive unit price also gradually to reduce.
随着伺服控制技术的逐步提高，目前伺服驱动单元正逐步成为驱动单元的主力军，伺服驱动单元的价格也在逐步减低。
We design the servo control system of the bending joint based on the proportional servo technology.
基于比例伺服技术，设计了弯曲关节的伺服控制系统。
This paper introduces an AC servo control system based on the design of CPLD and analogue controller integration.
交流伺服控制系统的组成本文所设计的交流伺服控制系统是用于数控机床上的进给驱动系统。
This decoder can be used in the DVD servo control chip and meets the requirement of the expected performance.
该设计应用于DVD伺服控制芯片中，达到了预期的性能要求。
A kind of the pulse control mode, the drive and motor closed loop, but not to the numerical control system, the feedback device, in a sense, can open loop control called the servo control.
一种采用脉冲控制方式，此种驱动器与电机闭环，但不反馈到数控系统，这种驱动器在某种程度上可称为开环控制的伺服控制。
As the existing great power consumption of empty-load or light-load, the bipolar PWM control can be applied only in small or middle power servo control systems.
在轻载或空载时由于存在大的功率损耗，双极性PWM控制只能被应用于中、小功率伺服控制系统。
Double servo control, high precision orientation, size more nicety.
采用伺服控制，实现高精度定位，尺寸准确。
The algorithm also combines correlation matching with the control characteristic of servo system, selects the matching area more reasonably, and thus enables a faster servo control speed.
算法还将相关匹配与伺服系统的控制特性结合起来进行考虑，更加合理地选择匹配区域，从而允许更快的伺服控制速度。
Servo control in optoelectronic tracking system is one of the key technologies to realize the high precision tracking.
光电跟踪系统中的伺服控制技术是实现高精度跟踪的关键技术之一。
In the view of the control system, the paper discuss hardware architecture, software architecture, interface architecture, data communication, and servo control system.
文章从系统角度讨论了卷簧机数控系统的硬、软件构成，界面结构，数据通讯及伺服控制。
Consider now the same test carried out with servo control based on crosshead travel or displacement of the grips.
现在我们来研究用十字夹头位移或位移夹头伺服控制来完成相同的试验。
Based on the attributes of different errors, the method for transferring miss distance measurement error in servo control system is given.
在考虑不同误差属性的基础上，给出了脱靶量测量误差在伺服控制系统中的传递方法。
The article presents the application of servo control in the conveying system of transfer press, particularly describes the operating principle and composition of servo control system.
介绍伺服驱动控制技术在多工位压力机的输送系统上的应用情况，重点介绍伺服控制系统的工作原理及组成。
This paper investigates the method for implementing visual servo control of robotic micromanipulator.
本文介绍了实现微操作机器人视觉伺服控制的方法。
The bench tests proved that the return ability of the EPS system under rapid steering had been greatly improved by this servo control technique.
台架性能试验验证表明，采用这种伺服控制方式，电动助力转向系统快速回正时的平稳性有所提高。
Servo control alternating pressure test will be the trend of alternating pressure test in nation and abroad.
伺服控制型文变压力试验机将成为国内外交变压力试验机的发展趋势。
If the whole single ac servo control system is accomplish, farther research is must.
完成整个单芯片交流伺服控制系统尚需进行进一步的研究。
Servo valves are very important for servo control systems.
伺服阀是伺服控制系统中的重要元件。
The pedestal drives a cuboid antenna, which can pitch and roll to direct at target accurately, and is driven by servo control.
该分体式天线座通过伺服控制来实现天线的俯仰和横滚运动，从而准确地指向目标。
This paper presents a new adaptive fuzzy control scheme and its application to speed servo control for a quadruped robot.
本文提出一种新的模型参考自适应模糊控制器，并应用于步行机器人关节速度伺服控制。
This paper presents a new adaptive fuzzy control scheme and its application to speed servo control for a quadruped robot.
本文提出一种新的模型参考自适应模糊控制器，并应用于步行机器人关节速度伺服控制。
应用推荐