Shaft sleeve: Sure to change sleeve when its surface is rough and damaged seriously.
轴套：表面粗糙及损伤严重时，更换轴套。
Regularly check the wear of pipe shaft sleeve , wear in time after a larger replacement.
定期检查管道泵轴套的磨损情况，磨损较大后应及时更换。
The shaft sleeve and mechanical seal can be replaced without removing the shaft from the pump.
轴套和机封的更换不必将轴从泵上拆下来。
The main parts of pump are pump casing, pump cover, impeller, shaft, shaft sleeve and supporting parts.
主要由泵体、泵盖、叶轮、轴、轴套和支承部分构成。
Gear after heat treatment with high hardness and strength, and shaft installed in the replaceable shaft sleeve.
齿轮经热处理有较高的硬度和强度，与轴一同安装在可更换的轴套内运转。
The main parts of pump are pump casing, pump cover, impeller, shaft, sealing ring, shaft sleeve, bearing and shaft seal etc.
泵主要由泵体、泵盖、叶轮、轴、密封环、轴套、轴承、轴封等零件组成。
The upper end of the lifting rod is provided with the shaft sleeve and a button which are connected with the eccentricity handle.
提升杆上端装有与偏心把手连接的轴套和按钮。
A shaft sleeve installation assembly for a rotation shaft relates to the field for a shaft protecting sleeve on the rotation shaft.
转动轴用轴套安装组合件涉及固定安装在转动轴上的护轴轴套领域。
Wax precision casting is adopted for the shaft sleeve, increasing material utilization ratio by 77% and realizing "less cutting and no cutting".
铸造工艺采用石蜡精铸成型，使材料利用率提高77％，达到少切削、不切削目的；
HanYingchun. Wang Xueming. Chen Yubao the new technology of the forward extrusion and cross rolling for the rear axle shaft sleeve of light truck.
韩英淳。王学明。陈义宝农用运输车正挤与横轧式后桥半轴套管。
After slipping of crank shaft sleeve in large Marine diesel engine, there will appear obvious vibration and twisting on the hull and shaft system.
大型船用柴油机曲轴红套滑移以后，船体和轴系分别出现明显的振动和扭转振动。
The shaft sleeve installation assembly for the rotation shaft has simple structure, reliable installation and connection and convenient disassembly.
本转动轴用轴套安装组合件结构简单，安装连接可靠，拆卸方便。
One end of a paper transmission drum is provided with an eccentric shaft sleeve and a driving mechanism is at the lower part of the eccentric shaft sleeve.
在传纸滚筒一端上带有偏心轴套，偏心轴套下部有一驱动机构。
An assembly step matching the shaft shoulder of the mainshaft is positioned on the shaft sleeve and a fixed gap forms between the shaft sleeve step and the water-tight plate.
轴套上设有与主轴轴肩配置的装配台阶，轴套台阶与水密封板之间形成有固定的间隙。
Our main products include chain track, track roller, carrier wheel, guiding wheel, driving wheel, track shoe screw, shaft sleeve, pin, bushing, and link rod, recoil spring etc.
我们公司专业生产挖掘机链轨、链条及支重轮、托链轮、引导轮、驱动齿、履带板螺栓、链销、链通、斗轴、斗轴套、千秋架、弹簧座等系列产品。
The shaft is fixed to the wheel body and arranged uniformly on the tooth path, and the outside diameter of the bearing or the shaft sleeve jacketed on the shaft is as wide as the tooth path.
所述轴固联于轮体，等分排列于齿道上，套于轴的轴承或轴套的外径与齿道等宽。
The utility model discloses a flanging die of a shaft sleeve with an opening and thin walls, which is used in the flanging process of fitting parts such as shaft sleeves with openings and thin walls.
本实用新型公开了一种开口薄壁轴套的翻边模，用于开口薄壁轴套类零件进行翻边的加工。
It is found there is obvious relationship between the mass distribution of impeller and normal relative displacement of contact points of impeller and shaft sleeve within the certain rotational speed.
当转速一定时，叶轮与轴套接触点的法向相对位移与叶轮的质量分布存在着明显的联系。
To prevent the reducer output shaft bearing perishable and more frequent replacement of the drawbacks of nylon sleeve.
防止了减速机输出轴支座易坏及更换尼龙套较为频繁的弊端。
Mechanical seal leakage, the sleeve and the shaft leakage between (inter-axis leakage) is relatively common.
机械密封泄漏中，轴套与轴之间的泄漏是比较常见的。
Meanwhile, the handle and the cone of the gear shaft will have increased loads on gear, sleeve and workpiece.
同时，手柄对齿轮和齿轮轴的锥体对锥套及工件都会产生增力的作用。
Together with the shaft installed in the sleeve can be replaced within the operation.
与轴一同安装在可更换的轴套内运转。
Through a rigid sleeve coupling, pump shaft was connected to the motor shaft.
通过一个刚性套筒联轴器，泵轴被连接至电机轴上。
A kind of measuring method and corresponding measuring instrument for measuring cone shaft and cone sleeve of the high-speed wire rolling mill's roller are introduced.
介绍了一种检测高速线材轧机轧辊锥轴与锥套锥度的检测方法以及相应的锥体锥度检测仪。
Head, shaft head, using cast iron sleeve, wear durability, lifting equipment sub-two kinds of electric and manual.
水头、轴头、采用生铁套，耐磨耐用，提升装置分电动和手动两种。
The auxiliary shoe-fixing apparatus consists of auxiliary mounting base, shaft, locking pin, locking sleeve and shoe-fixing spring.
副上鞋器由副安装座、轴、锁闭销、锁闭套和上鞋弹簧组成。
Block in the mud with four skeleton oil seal and sleeve to prevent shaft wear and prolong the service life of shaft.
泥浆泵座中装有四只骨架油封和轴套，防备轴磨损，延伸轴的应用寿命。
The nonmetal material insulating part is an inner insulating sleeve of the main shaft, which is sleeved at the lower part of the rotor driving shaft.
非金属材料隔热件为套设在转子驱动轴下部的主轴内隔热套。
The nonmetal material insulating part is an inner insulating sleeve of the main shaft, which is sleeved at the lower part of the rotor driving shaft.
非金属材料隔热件为套设在转子驱动轴下部的主轴内隔热套。
应用推荐