The iron ore sintering process is one of dioxin pollution sources.
铁矿石烧结过程是二恶英主要污染源之一。
The formula is very useful for thermal balance calculation of sintering process.
这个公式对进行烧结热平衡计算是十分有用的。
Based on the testing data, the suitable sintering process parameters were defined.
根据试验数据。确定了合适的烧结工艺参数。
It's necessary to study how to control the growth of grain size during the sintering process.
因此如何控制烧结过程中晶粒长大成为亟需解决的问题。
Powder rolling-sintering process for producing high pure nickel porous foils has been studied.
研究了粉末轧制—烧结工艺生产高纯多孔镍箔的方法。
The liquid phase sintering process of steel based carbide - iron bimetal composite was researched.
研究了液相烧结钢结硬质合金-铁双层复合材料的生产工艺。
Through the operation practice, the advantage of hot water technique in sintering process was proved.
通过生产实践，证明了热水技术在烧结工艺中所起的作用。
Temperature effect on the desulfurization of sintering process is investigated by mini-sintering test.
用烧结饼微型试验法研究了温度对烧结过程脱硫的影响。
The sintering process is the heart of the preparing process of coal ganguethermal insulation material.
煤矸石保温材料的烧结过程是其制备工艺的关键。
This paper introduces formation mechanism of overdamp layer and analyzes the effect on sintering process.
介绍过湿层形成机理，分析过湿层对烧结工艺过程的影响。
The air leakage on sintering machine affects the technological and economical indexes of sintering process.
烧结机漏风问题直接影响烧结过程的各项技术经济指标。
Particles coating process and sintering process of the compact was discussed according to experiment results.
根据实验现象对颗粒涂层过程和坯体的致密化过程进行了详细探讨。
Effect of superfine Ni powder addition on the sintering process and final properties of driven gears was studied.
研究了经超细化处理的镍粉对从动齿轮烧结工艺和性能的影响。
Therefore, these results prove that crystal formation interferes with the sintering process of a crystalline frit .
所以这些结果证明晶体结构干扰结晶弗里茨的烧结过程。
Am optimized control over sintering process is guided by the result of permeability calculation through expert rules.
通过专家规则将烧结状态透气性预测的结果用于指导铅锌烧结过程的优化控制。
The effects of pressure and sintering process on the microstructure and properties of the materials were investigated.
研究了压制压力、烧结工艺对材料微观组织及性能的影响。
The special glaze composition and sintering process attained is suitable to the production of photoluminescence glaze.
探索出的特殊配方和制备工艺，适合于光致发光釉的生产。
The results showed that ball-milling treatment and calcining temperature exert an influence on sintering process of HA.
结果表明，球磨处理和粉体煅烧温度对HA坯体的烧结行为均有明显影响。
The result showed that burying sintering process may make breakdown voltage smaller and apparent dielectric constant bigger.
结果表明，采取粉料埋烧可以明显降低压敏电压、提高介电常数。
So temperature field measurement of the cross-section plays an important role in realizing automatic control of sintering process.
因此，烧结断面温度场的检测对实现整个烧结过程的全面自动化具有重要的意义。
The material is never fully molten, although there might be a small volume fraction of liquid present during the sintering process.
该材料是永远不会完全熔化，虽然有可能是一个体积小，液体目前在烧结过程中的一小部分。
As a important sintering process, the deep-bed sintering play the roles of improving sinter quality and decreasing fuel consumption.
厚料层烧结是一项很重要的烧结技术，具有改善烧结矿质量，降低燃料消耗等优点。
An intelligent guide system for controlling sintering process is developed, which earns theoretical significance and practical value.
开发烧结过程智能实时操作指导系统，具有重要的理论意义和实用价值。
However, iron powder is liable to oxidation, which will reduce the surface activities of the powder and hinder the sintering process.
但是铁粉很容易氧化，粉末表面活性降低，妨碍烧结过程的充分进行，使实际烧结过程难以达到理想的烧结程度。
Based on the Chinese bauxite character and the status of the traditional sintering process, the intensified sintering process was studied.
针对我国铝土矿资源特点和我国烧结法生产氧化铝的现状，论述了强化烧结法生产氧化铝新工艺。
According to characters of iron ore sintering process, long and short-term control strategy of sintering burn-through point is put forward.
根据铁矿石烧结过程的特点，提出了烧结终点的长期和短期控制策略。
The model consists of two parts, the general model of ironmaking system and submodel of sintering process, both are nonlinear program model.
模型由炼铁系统总体模型和烧结过程子模型组成，二者均为非线性规划模型。
After a lot of tests, it proves that it is feasible to produce potassium and aluminium products with potassium SLATE by lime sintering process.
经过大量试验，证实了用石灰烧结法处理富钾板岩生产钾铝产品的工艺是可行的。
The article makes an introduction of new sintering process with wet method of coal rear-feeding in raw mix and it also verifies the feasibility.
本文介绍了一种生料煤湿法后加的烧结法生料掺煤新工艺，并对其可行性进行了研究论证。
The article makes an introduction of new sintering process with wet method of coal rear-feeding in raw mix and it also verifies the feasibility.
本文介绍了一种生料煤湿法后加的烧结法生料掺煤新工艺，并对其可行性进行了研究论证。
应用推荐