A new way called chemically modified sol-gel method for preparing patterned functional films is introduced.
介绍了一种功能薄膜微细图形制备新方法—化学修饰溶胶-凝胶法。
The room temperature ferromagnetism in Co-doped ZnO films with different carrier concentration fabricated by the sol–gel method at different annealing atmospheres was investigated.
用溶胶–凝胶法制备的钴掺杂氧化锌薄膜在不同气氛下退火后均显示室温铁磁性，并且具有不同的载流子浓度。
Homogeneous and transparent thin nanostructured titania films doped by Y3 + were prepared on glass substrates by sol gel processing and dip coating technique.
用溶胶-凝胶法和浸渍-提拉法工艺，在玻璃表面上制备了均匀、透明的钇离子(Y3 +)掺杂二氧化钛纳米薄膜。
The immobility of semiconductor thin films is one of the effective methods to solve this problem, while sol-gel technology can realize the immobility of thin films.
制备半导体膜的固定化是解决这一问题的有效途径之一，而溶胶凝胶技术可以实现薄膜的固定化。
YSZ films are prepared by sol gel method.
应用溶胶凝胶方法制备了YSZ薄膜。
Several methods of the preparation of ITO thin film with sol-gel technique were introduced. The ITO thin films were gotten by the inorganic method.
介绍了几种用溶胶凝胶法制备ito薄膜的工艺方法，用其中一种无机的方法成功制备了ITO透明导电膜。
Combined with characteristics of functional films, a photosensitive sol-gel technique, in this paper, was examined, during which the fine-patterning process of the films was taken into consideration.
本研究结合功能薄膜的特点，研究了感光溶胶-凝胶技术，在薄膜的制备过程中就考虑到薄膜的微细加工。
There are many techniques for fabricating ceramic films such as PVD, CVD, high-temperature sintering and sol-gel method.
陶瓷薄膜的制备技术多种多样，如物理气相沉积、化学气相沉积、高温烧结和“溶胶-凝胶”法等。
In this thesis, the sol-gel preparation and characteristics of the PST thin films were investigated in detail, and got the high quality PST thin films.
本工作对溶胶凝胶法制备p ST薄膜及其性能进行了较为详细的研究，获得了性能优越的PST薄膜。
Many processes are used to prepare transparent conductive films, such as magnetron sputtering, vacuum reactive evaporation, chemical vapor depositions, Sol-gel, laser-pulsed deposition.
多种工艺可以用来制备透明导电薄膜，如磁控溅射真空反应蒸发、化学气相沉积、溶胶-凝胶法以及脉冲激光沉积等。
WO3 precursor solution was prepared by Sol-gel method. The films were printed by dip-coating method.
采用溶胶-凝胶方法制备WO3前驱液，利用浸渍-提拉法使其成膜。
Sol-gel method is widely used to synthesize nano-thin films.
溶胶-凝胶法是制备纳米薄膜的常用方法。
Firstly, ITO conductive anode films were fabricated on glass tube substrates by sol-gel process.
首先，本文重点研究了ITO薄膜的溶胶—凝胶制备工艺。
Preparation and characteristics of preferred oriented ferroelectric thin films derived from sol-gel method are described.
本文综述了用溶胶—凝胶法制备择优取向铁电薄膜的工艺方法、特点和机理的最新研究进展；
BST thin films sol gel technique epitaxial growth electrical properties.
标签薄膜溶胶-凝胶工艺外延生长电性能。
Super-hydrophobic silica-based thin films were prepared by sol-gel processing. Both surface energy and roughness were controlled using colloidal silica particles and fluoroalkylsilane.
溶胶— 凝胶法制备超疏水薄膜，加入胶体二氧化硅粒子和氟硅烷控制薄膜表面粗糙度和表面化学性质。
The advances in the preparation ofnano-thin films by sol-gel method as well as its principle and characteristics are briefly reviewed. At the end of this paper, existing problems are also pointed out.
综述了溶胶-凝胶法制备纳米薄膜的原理与特点及其最新研究进展，最后指出了溶胶-凝胶法制备纳米薄膜今后急需解决的问题。
WO_ (3) electrochromic films were prepared on ITO glass substrates by the sol-gel method.
采用溶胶-凝胶法，在氧化铟锡(ito)玻璃基质上制备氧化钨电致变色薄膜。
The Indium-tin oxide (ITO) films were prepared on glass substrate using sol-gel dip coating method.
采用溶胶-凝胶工艺，用提拉法在玻璃基底上制备了ITO透明导电薄膜。
The Indium-tin oxide (ITO) films were prepared on glass substrate using sol-gel dip coating method.
采用溶胶-凝胶工艺，用提拉法在玻璃基底上制备了ITO透明导电薄膜。
应用推荐