The efficiency of this process depends on the surface area of the sorbent, and an easy way to increase the surface area is to spray a liquid sorbent into the air as a fine mist.
这一过程的效率取决于吸收材料的表面积，我们可以通过将液态的吸收剂以细水雾的形式喷入空气中，就能轻松的扩大接触面积。
The accuracy of the ICE spray calculation results depends on the models adopted for simulation of the(primary) and secondary breakup process.
内燃机喷雾模拟计算结果对选用的初级破碎模型、次级破碎模型有较强的依赖性。
Meanwhile, the result show that model precision can meet needs of light draft technique process control based on the equipment and spray state in good condition.
结果表明，在设备与喷淋状态保证的前提下，模型精度可以满足轻压下工艺过程控制的要求。
In this process, it throws a fine spray of gasoline into air passing through the carburetor on its way to the engine.
在这一过程中，化油器把燃油以雾状喷人流经化油器的空气中，然后进入发动机。
On this basis, the paper established a model for predicting the plasma spray coating quality under different process parameters.
在此基础上建立预测模型，对不同工艺参数下等离子熔射层进行质量预测。
While ambient pressure is less than the threshold pressure, the effect of ambient pressure on the spray process, velocity distribution of droplets and performance of the thruster can be ignored.
当工作环境压力低于一定值时，其对喷雾过程的影响可以忽略，而推力器性能基本保持不变。
This paper briefly summaries the studies on the role of ocean whitecap, sea spray and bubble in sea-air exchange process, and the development of research in the scope abroad.
简要介绍了海洋白浪、水沫、气泡在海—气交换过程中的作用以及国外对此开展的研究工作的概况和进展。
The on-site drying method by using hot oil circulation and hot oil spray, its process and the operation result for large transformer are introduced.
介绍了采用热油循环及热油喷淋法现场干燥大型变压器的方法、过程和运行效果。
The effects of pretreatment for powder coating on the galvanized steel sheet were investigated through tests of cryslalography, film weight and salt spray test, and the existing process was improved.
对一种用于汽车和通讯行业的新型预磷化镀锌钢板的粉末喷涂前处理工艺进行了研究，通过晶相、膜质量及盐雾试验，对预磷化板的现有工艺进行了改进。
Based on practice, characteristics of coating resin for spray-up process are discussed in this paper.
本文根据生产实践，讨论了喷涂用胶衣树脂所应具备的特性。
Technological process of regeneration of seal rib and profile on tri-lobe Roots blower made in Germany is introduced comprehensively using the technique of electric brush plating & hot spray welding.
介绍了综合运用电刷镀、热喷焊技术对德国制造的三叶罗茨鼓风机密封筋、型面进行“再生”的工艺过程。
Based on the analysis of the thermodynamic process of the spray J-T cooler, the theoretical minimum ratio of the cooler′s flowrate has been derived.
通过对喷射式J-T制冷器的热力分析，推导出了制冷器预冷级与制冷级的流量比的理论最小值，可为此类制冷器的设计提供参考。
For studying spray-quenching process of large-scale forgings, spray-quenching equipment was developed, and experiments of spray quenching on shaft type parts were carried out.
为研究锻件喷雾淬火冷却过程，研制了喷雾淬火热处理装置，并对轴类件进行喷雾淬火热处理试验。
It's an arduous, time-consuming process, using atomic layer deposition to spray material that's an atom thick, on a microscopic surface.
使用原子层沉积物在一个微小的表面对只有一个原子这么厚的材料进行喷涂，可是一个费力、耗时的过程。
Three-dimensional Simulation on Liquid Film Vaporization in the Process of Spray Impingement;
液体温度低于沸点时，发生在液体表面的汽化过程。
The influence of injection parameters including the nozzle diameter and injection timing on the spray and combustion process of dimethyl ether (DME) was investigated.
对发动机喷油系统参数对二甲醚(DME)喷雾燃烧过程的影响进行了实验研究，包括喷孔直径和喷油提前角对喷雾燃烧过程的影响。
In addition, the effects of the combustion chamber shape on flow and spray process were discussed.
此外，本文还着重研究了燃烧室形状对缸内气体流动及喷雾的影响。
A thermal spray equipment for bore surface coating based on centrifugal atomization was developed, the atomization principle and particles formation process of the equipment were introduced.
研制了一种基于离心雾化原理的内孔热喷涂设备，简要介绍了该设备的工作原理和粒子的雾化过程。
Experimental study was carried out to investigate the influence of the main processing parameters on the quality of sprayed coatings during the plasma spray tooling process.
在等离子熔射成形中，粒子的飞行特性是影响沉积率和涂层动态生长质量的重要因素，而熔射工艺参数又是影响粒子飞行特性的直接因素。
Experimental study was carried out to investigate the influence of the main processing parameters on the quality of sprayed coatings during the plasma spray tooling process.
在等离子熔射成形中，粒子的飞行特性是影响沉积率和涂层动态生长质量的重要因素，而熔射工艺参数又是影响粒子飞行特性的直接因素。
应用推荐