It is difficult to avoid the cracks using mild steel electrode and common welding technologies.
用普通碳钢焊条与一般焊接工艺是很难避免裂纹的。
Aluminum coated steel electrode for use in welding the water wall of the boiler has been developed.
本文在分析渗铝钢焊接规律的基础上，研制了一种发电厂锅炉水冷壁渗铝钢，焊条。
The component of electrode coating has certain effects on the usability of stainless steel electrode.
焊条药皮成分对不锈钢焊条工艺性能有较大的影响。
The film formed on the stainless steel electrode under the potentiodynamic polarization with increasing sweep potential.
随着极化电位向阳极区移动，不锈钢电极发生阳极氧化，形成了氧化铀沉积膜。
A comparison between the combinatory graphite electrode and adjustable graphite electrode or traditional steel electrode is made.
并将石墨组合电极分别与可调式石墨电极和传统的钢质电极作了比较。
In this paper various metal transfer modes in the pulse MIG welding with steel electrode are studied by means of high speed cine camera and oscillograph.
本文利用高速摄影机和示波器研究了钢焊丝熔化极脉冲焊的各种熔滴过渡形式，试验是在平焊和仰焊位置进行的。
If there aren't cast-iron electrode, the cast-iron electrode can be made by ordinary low carbon steel electrode, and repair the damaged stock with arc cold welding.
在没有铸铁焊条的情况下，采用普通低碳钢焊条制作铸铁焊条，用电弧冷焊技巧修复损坏的铸铁件。
Effects of peak electric voltage and feed flow rates of methane and hydrogen on CH4 conversion, C2 yield, and the selectivity were investigated using copper or stainless steel electrode.
实验采用铜电极和不锈钢电极分别考察了输入电场峰值电压和甲烷、氢气进料流量等参数对甲烷转化率和碳二烃收率、选择性的影响。
The effect of span between two cores of lime-titania type carbon-steel electrode was investigated using the method of overlay welding on the plate work-piece and high speed camera system.
采用平板堆焊的方法及高速摄像系统，研究了双电极钛钙型碳钢焊条的焊芯间距对焊接工艺和电弧形态的影响。
In this paper, a variable model of optimum droplet transfer mode for pulsed GMA welding using a steel electrode is developed on the principle of the micro-interference instability of magnetofluid.
前言：基于磁流体微扰动“失稳”的原理，建立了钢焊丝脉冲GMA焊最佳熔滴过渡形式的参数模型。
Low hydrogen electrode to be used for welding thick steel plate to casting and high tensile plates.
应采用低氢焊条焊接厚钢板与铸钢件和高强度板间的连接。
The results show that using HTG-1 electrode may effectively decrease welding cold crack sensitivity of the steel, and the sensitivity to cold crack decreases as preheating temperature increases.
结果表明：采用HTG - 1焊条可以有效地降低该钢焊接冷裂纹敏感性；预热温度增加，抗冷裂效果更好。
Surfacing process test is made on Q235 steel substrate by shielded metal arc welding process using electrode CHR322 at different welding current condition.
前言：采用焊条电弧焊工艺方法，选用C HR322堆焊焊条在Q235钢基体上以不同的焊接电流进行了堆焊试验。
The investigation of effects of rare-earth yttrium and boron, which are in the 3.5% nickel-containing steel welding electrode on low temperature toughness has been carried out.
对含镍3．5％低温钢手工电焊条配方中稀土钇与硼的作用进行了试验研究。
Based on the cyclic voltameter it could be concluded that in the working potential reign of the nickel electrode steel under the micropores was in the passive state and could not corrode.
循环伏安图谱说明，在镍电极工作的电位区域，微孔中钢铁处于钝态，不会腐蚀。
Electrode automatic control is a key technique in arc furnace steel making.
电极调节是电弧炉炼钢中的关键技术。
DCEP (Direct Current Electrode Positive) is used for most stainless-steel welding.
直流反接用于大多数不锈钢的焊接。
This paper introduces the application of intelligent control to electrode elevating control among arc steel-making course.
文章介绍了智能控制在电弧炉炼钢过程电极升降控制中的应用。
The steel bar with good electrical conductivity was used as lateral electrode in the making of carbon fiber (CF) electrically conductive concrete for heating.
利用钢筋良好的导电性来制作碳纤维导电发热混凝土的侧面电极，并进行了相关的试验研究。
The mechanism of welding crack generation in the copper - stainless steel tube electrode stem of Vacuum Consumable Arc Furnace has been analyzed.
分析了真空白耗电弧炉铜-不锈钢异种金属套管式电极杆焊接裂纹产生的机理。
The corrosion behavior of electrode of stainless steel with polyaniline coating in corrosive acid media were investigated.
研究了由聚苯胺修饰的不锈钢电极在酸性介质中的腐蚀行为。
With SMAW method, the surfaces of A3 and 45 steel were welded by using the series of CHR electrode, and the microstructure and performance of surfacing welding layer metal were analyzed.
借助手工电弧焊方法，使用CHR系列堆焊焊条对A 3、45钢进行堆焊加工，分析了其堆焊层金属的显微组织及性能。
The invention relates to a welding rod material for sulfur resisting dew point corrosion steel, in particular to an electrode covering for sulfur resisting dew point corrosion steel.
本发明涉及抗硫露点腐蚀钢的焊条材料，特别涉及一种用于抗硫露点腐蚀钢的焊条药皮。
Another set of brushes slightly tapers the work end of the electrode to expose the end of the steel core wire.
另一套刷稍微蜡烛工作结束电极揭露结束钢芯线。
The high strength and high toughness hardfacing covered electrode to the medium-high carbon alloy steel surface' repair was put forward in this paper.
本文针对焊缝熔敷金属在高强时，容易开裂问题展开研究，研制了中、高碳合金钢工件表面修复的高强、高韧新型堆焊焊条。
The LB-52NS electrode is used in our country to weld both A131 and A537 offshore platform steel, so the strength matching of their welded joints is different.
在我国，海洋平台钢A131和A537均用LB-52NS焊条焊接，因而这两种材料焊接接头的强度匹配不同。
With austenitic welding material, solid wire, flux-cored wire and electrode, welded joint mechanical property of TCS ferritic stainless steel all can meet usability.
T CS铁素体不锈钢采用奥氏体型焊材，实芯焊丝、药芯焊丝和电焊条方法，焊接接头力学性能可以满足使用要求。
Stainless steel textile web is pressed outside as electrode.
用外贴不锈钢纤维网为电极。
Suitable for SMWA/MMA welding of low carbon steel and low alloy steel with all kinds of electrode.
适用于所有牌号的焊条对低碳钢、普通低合金钢的手工电焊弧。
Suitable for SMWA/MMA welding of low carbon steel and low alloy steel with all kinds of electrode.
适用于所有牌号的焊条对低碳钢、普通低合金钢的手工电焊弧。
应用推荐