Notice that SCTP USES many of the same sockets APIs as TCP and UDP do.
注意SCTP使用了很多与TCP和UDP相同的套接字api。
It greatly simplifies and streamlines network programming such as TCP and UDP socket server.
它极大简化了网络编程,如TCP和UD P套接字服务器。
Even though most services reserve both TCP and UDP ports, applications do not have to use both UDP and TCP.
尽管大部分服务同时保留tcp和udp端口,应用程序不必同时使用UDP和TCP。
You will create a _kerberos and _kpasswd service for both TCP and UDP, which will result in four unique entries.
将为TCP和UDP创建一个_ kerberos和_ kpasswd服务,从而得到四个唯一条目。
Whereas NBT ran on TCP and User Datagram Protocol (UDP) ports 137-139, direct hosting USES TCP and UDP port 445.
尽管NBT在tcp和userDatagramProtocol (udp)端口137- 139上运行,直接托管使用TCP和UD p端口445。
Using this utility, you explored TCP and udp workload tuning while also learning some other noteworthy parameters.
使用这个实用工具,您研究了tcp和udp工作负载优化,同时还了解了一些其他值得关注的参数。
In these examples, both commands perform the same task — they specify that all TCP and UDP packets will match this rule.
在上述示例中,这两条命令都执行同一任务—它们指定所有TCP和UDP信息包都将与该规则匹配。
Function inet_init also initializes the various inet modules, such as the ARP, ICMP, the IP modules, and the TCP and UDP modules.
函数inet _ init也会对各个inet模块进行初始化,例如ARP、ICMP和IP模块,以及TCP和UDP模块。
JXTA provides communication without the need to specify separate TCP and UDP transports, and it is not limited to IP (RF, BT, etc. can be supported).
JXTA不需要指定单独的TCP和UDP传输就可以进行通信,并且它还不限于IP(支持RF,BT等)。
We can see from this figure that when the same service is provided using both TCP and UDP, both port Numbers are normally chosen to be the same.
图中我们看到,当同样的服务由TCP及UDP提供时,二者的端口号通常选择同一个。
These are initialized at start of day in a function called inet_init in linux/net/ipv4/af_inet.c (as TCP and UDP are part of the inet family of protocols).
它们都是在linux/net/ipv4/af_inet.c 文件中一个名为 inet_init的函数中进行初始化的(因为TCP和UDP 都是inet 簇协议的一部分)。
The active measurement technology widely used today is mostly based on ICMP, TCP and UDP, which consequently results in the limitation of the relevant measurement tools.
目前广泛使用的主动测量技术,大部分都是基于ICMP,TCP或UDP协议进行测量的,从而导致相关测量工具存在局限性。
During development of net-call application software, the TCP and UDP proxy was successfully implemented with SOCKS and WINGATE series proxy server and Socks 5 proxy technology.
使用SOCKS5代理技术,在网络寻呼系统应用软件中,采用SOCKS系列和WINGATE系列代理服务器,成功实现了TCP和UDP代理。
In the whiteboard system data transmission, according to different data type transmission, we use two different protocols of TCP and UDP to reduce network congestion and improve transfer efficiency.
在电子白板系统的数据传输中,针对所传输数据类型的不同,分别采用了TCP和UDP两种不同协议进行传输,降低了网络阻塞,提高了传输效率。
For example, NFS can use either TCP or UDP, depending on the version and your preference.
例如,NFS既可以使用TCP,也可以使用UDP,这取决于您所使用的版本和您的偏好。
Unlike TCP, the client and server code look quite similar for UDP-based communication.
与TCP不同,用于UDP通信的客户机代码和服务器代码非常相似。
If UDP is unavailable, however, audio and video streams are tunneled to clients through the TCP transport.
但是,如果不能使用UDP,则可以借助隧道技术将音频和视频流通过TCP传输到客户机。
Examples of protocols are TCP, UDP, ICMP, comma-delimited list of any combination of these three protocols and all (for all protocols).
协议示例有tcp、UDP、ICMP、用逗号分隔的任何这三种协议的组合列表以及ALL(用于所有协议)。
Using BNEP, you can run other networking protocols, such as IP, TCP, and UDP, over Bluetooth.
使用BNEP,可以在蓝牙上运行其他网络协议,例如IP、TCP和UDP。
With both TCP/IP and UDP/IP communications, the key elements are the IP addresses used to identify the hosts and the port number.
在TCP/IP和UDP/IP 的通信中,最主要的元素是用于确定主机和端口号的 IP地址。
The two most popular transport layer protocols are the transmission control protocol (TCP) and the user datagram protocol (UDP)
两种最流行的传输层协议是传输控制协议(TCP)和用户数据报协议(UDP)
The SIP protocol support TLS, UDP and TCP as transport, so they only viable solution was to use the framework.
SIP协议支持TLS、UDP及TCP作为传输层,因此唯一可行的方案就是采用Grizzly框架。
This is one of the key differences between TCP and the User Datagram Protocol (UDP).
这是TCP与 UDP(User Datagram Protocol,用户数据报协议)的一个重要区别。
To allow TCP port 3268,3269,15988 15989 6988 and the UDP port 2407
允许TCP端口 3268, 3269, 15988 15989 6988和UDP 端口 2407
For example, snoop and tcpdump both provide detailed information on different protocols under both UDP and TCP to varying levels.
例如,snoop和tcpdump都提供了关于UDP和tcp上不同协议的不同级别的详细信息。
The Internet is based upon a networking protocol called IPv4, which is the underlying basis for both TCP (used by HTTP and chat applications) and UDP (used for video and audio applications).
互联网是基于名为IPv4的网络协议的,该协议是TCP (HTTP及聊天应用使用)与UDP(视频与音频应用使用)的基石。
The command vsconfig -f startport: endport will change the port range used for UDP and TCP streaming from the default to that specified by the parameters startport and endport.
命令vsconfig - fstartport:endport将把用于UDP和tcp流的端口范围从缺省值更改为参数startport和endport指定的范围。
This amount should usually be less than the wall and approximately 4 times the size of the largest value of the TCP or udp send and receive Settings.
这个总量通常应该小于wall,并且近似于tcp或者udp发送和接收设置最大值的4倍。
This article focuses on TCP workload tuning, udp workload tuning, and some other noteworthy parameters with the no utility.
本文重点关注于tcp工作负载优化、udp工作负载优化,以及no实用工具所提供的一些其他值得关注的参数。
This article focuses on TCP workload tuning, udp workload tuning, and some other noteworthy parameters with the no utility.
本文重点关注于tcp工作负载优化、udp工作负载优化,以及no实用工具所提供的一些其他值得关注的参数。
应用推荐