Using the invariant under the dual orthogonal transformations, a method for the displacement analysis of spatial mechanisms is proposed.
本文应用对偶正交变换下不变量，提出空间机构位移分析的对偶不变量方法。
Then, the structural influencing coefficient and displacement amplification factor are calculated and compared with the analysis result of Pushover method.
本文系统地分析了多层抗弯钢框架的结构影响系数和位移放大系数。
The displacement demand (target displacement) of pushover analysis by adopting capacity spectra method is discussed.
评述了静力推覆分析方法中应用能力谱方法确定结构目标位移的应用情况。
The results of fluid displacement experiments in real rock samples agree with the theoretical analysis.
通过对实际岩石样品进行流体驱替实验，发现实验结果与理论分析相一致。
According to the analysis, the displacement and velocity of the building structure can be chosen as the output feedback variables for the controller.
通过分析，大楼结构的位置和速度可选为控制器的输出反馈变量。
Introducing the method of optimizing back analysis using displacement and summarizing the elastoplastic model.
对位移反分析方法作了介绍，并对各种弹塑性模型进行了总结。
The key of push-over analysis method is load pattern and target displacement.
推倒分析中的关键是加载模式的选取和目标位移的求取。
The basic notion, computing model and result verification, etc, of displacement measurement inversion analysis are expounded. The example of calculation shows its validity.
阐述了位移测量反演分析的基本思路、解算模型、成果检验等，并用计算实例说明了其有效性。
By using ALGOR finite element analysis system, the stress field and displacement field of deep excavation were calculated.
采用ALGOR有限元分析系统，对基坑开挖引起的应力场、位移场进行了分析计算。
The engineering geology, large bottomless cylindrical structure, construction method and displacement analysis for Nansha Wharf are introduced.
文章介绍南沙码头的工程地质，无底大圆筒结构、施工方法、位移分析；
The target displacement of each mode pushover analysis can be obtained by inelastic spectrum.
对应每阶振型下推覆分析的目标位移采用非弹性能力谱方法来计算。
By analysis and comparison between the displacement curve in the absence of failure and that in the presence of failure, the causes of clutch failure are known.
通过中间件在无故障情况下的位移曲线与在故障影响下的位移曲线比较分析，最后可以掌握离合器故障产生的原因。
But the method of its design analysis is not perfect yet, and the study on its reliability, deformation and displacement is also very poor.
但目前土钉支护结构的设计分析方法仍不够完善，对其可靠性、变形位移计算的研究也很不足。
The stress, strain and displacement in pavement structure can be computed by the mechanical analysis program of the multilayer elastic system.
应用多层弹性体系力学分析程序计算路面结构的应力、应变和位移。
The extrusion is successfully divided into three ideal stages through the analysis on the pressing force and displacement curve in the process of extrusion.
通过对挤压过程压制力和位移曲线的分析，提出了对挤压过程三个阶段的合理划分。
The structural analysis shows that the response period, displacement and bearing capacity satisfy the demand of the code.
结构分析表明，结构的周期、位移以及承载力均满足规范要求。
Based on interval analysis and displacement finite element method, the static displacement response analysis of structure comes down to solve the interval finite element control equation.
现有的理论和方法采用区间分析和位移法有限元理论对其进行分析，最终归为位移法区间有限元控制方程的求解。
Based on the visual work principle of structure analysis, a general formula for the displacement calculation is deduced for the static analysis of the beam on elastic foundation.
根据结构分析中的虚功原理推导弹性地基梁位移计算的一般公式，介绍了连续弹性地基梁的静力分析方法。
Transfer function model between the input speed of transmission and the engagement displacement of the clutch is built up through an analysis on the system of drive of the vehicle.
通过对离合器传动系动力学分析，建立了车辆起步时变速器输入轴速度与离合器接合位移之间的传递函数模型。
Error analysis shows that the displacement measuring error entirely depends on geometric positioning precision of the first bar code center.
误差分析表明：位移测量误差完全取决于首条码中心几何定位。
Formula for calculating shear and displacement of the top of column in bentuncler general load has been proposed the basis of analysis of displacement conditions ofbent.
通过对变截面多跨不等高排架位移条件的分析，导出了此类结构在一般荷载作用下的柱顶剪力及变形计算公式。
This paper presents the response displacement method for seismic response analysis of slender underground structures.
文章根据细长地下结构的地震响应特点和实例，对响应位移法进行了探讨。
The optical technology used in accuracy test, displacement measurement and vibration analysis has more and more importance today.
光学技术用于精度检验、位置测量或振动分析，现已越来越具有重大的意义。
An algebraic method is proposed for the forward displacement analysis of the dodecahedral variable geometry truss manipulators.
提出一种十二面体变几何桁架机器人机构正位置分析的代数求解方法。
In this paper, adopted analysis method, through demonstrate quality of node displacement, expounded analysis method of the geometric composite analysis of space splice chain pole system.
通过对结点位移性质的论证，提出了空间铰接链杆体系几何组成性质分析的解析方法。
On the basis of the analysis of shaft lining stress state and displacement state, proposed the back analytical method for determination of the elliptic load acting on shaft lining.
在分析受不均匀荷载作用的立井井壁应力和位移的基础上，提出了确定立井井壁椭圆荷载的反分析方法。
By means of the null point, growth index analysis and displacement distance plot, the authors discussed the process of negative structure inversion.
采用零点、距离位移曲线和生长指数等定量分析方法，讨论了断裂的构造负反转过程。
This condition simplifies the displacement compatibility analysis and has generated a proliferation of "rigid pier" solutions.
这一条件使刚性基础相应的位移分析得以简化，并提出许多“刚性基础”的解。
This condition simplifies the displacement compatibility analysis and has generated a proliferation of "rigid pier" solutions.
这一条件使刚性基础相应的位移分析得以简化，并提出许多“刚性基础”的解。
应用推荐