Feedforward compensation based on the PID control algorithm.
基于前馈补偿的PID控制算法。
In the PID control algorithm, the parameter installation is extremely important, its quality direct influence control performance.
PID控制算法中，参数整定是十分重要的，其好坏直接影响控制性能。
This algorithm is with wider application range compared with the other self-tuning PID control algorithms.
该算法与其它自校正PID控制算法相比，具有适用范围更广的特点。
The simulation and motor control show that the new algorithm has fast learning rate, good convergence properties and can overcome the defects of traditional PID algorithm.
仿真实验及在伺服电机转速控制中的应用表明，该算法具有较快的学习速度及良好的收敛性能，并有效地克服了传统PID算法的缺陷。
The system is composted of a high accuracy thermocouple and a 8031 single chip computer while adaptive PID control algorithm is employed.
该系统由一个高精度的热电偶和8031单片机组成，采用自适应PID控制算法。
Aiming at the problem of traditional PID control algorithm is difficult to get ideal control effect, an adaptive PID control algorithm based on BP neural network is proposed.
针对传统的PID控制算法很难获得比较理想的控制效果的问题，提出一种基于BP神经网络的自适应pid控制算法。
The proposed prearrange PID control algorithm based on the basic theory of algorithm with some theory ratiocinations, experiment validity.
结合PID算法的基础原理，经过适当的理论推导、实验验证，提出了预置PID控制算法。
The fuzzy PID control algorithm consists of fuzzy control and digital PID adjustment.
本文提出的模糊PID控制算法，主要由模糊控制和数字PID调节构成。
Also this paper discusses the basic method of ant colony algorithm to optimize PID control parameter.
探讨了遗传算法优化PID参数的基本方法，着重研究了改进遗传算法的PID控制优化。
This system can receive velocity instructions through serial port, then control the motors by a certain PID algorithm.
系统通过串口通讯方式获取小车速度指令，并PID控制算法对直流电机进行控制。
Cylinder is executing element of air pressure system. Proportional valve is the control element. A dynamic integral separated PID algorithm control press.
压力系统采用气动回路，气缸作为执行元件，比例阀为控制元件，使用动态积分分离算法闭环控制。
Using the PSO algorithm to optimize the on-line PID controller's parameters, desirable control effect is obtained.
通过运用PSO算法对PID控制器参数进行在线调整，使模型参考自适应控制达到理想的控制效果。
This paper also analysis the control algorithm and the vary circumstance of PID parameter.
并对张力控制算法及PID参数的变化情况进行了分析。
The system uses electro-hydraulic moment servo control system to simulate wave torque and PID algorithm to control. The result of simulation is up to the requirement.
本系统用电液力矩伺服控制系统来模拟海浪力矩，采用PID算法进行控制，其仿真结果符合要求。
An intelligence PID control algorithm based on the expert system was discussed.
讨论了一种基于专家知识的智能p I D控制算法。
An intelligence PID control algorithm based on the expert system is discussed in this paper.
本文讨论了一种基于专家系统的智能PID控制算法。
Finally, the result of experiment shows that the algorithm based on self-tuning fuzzy PID is effective for electronic throttle control.
最后，试验结果表明自整定模糊pid控制算法对于电子节气门控制具有较好的效果。
By the experiment of fixing static object and contrasting experiments of tracking moving object, the capability of the visual tracking system and the velocity PID control algorithm is tested.
并通过静态目标锁定实验和动态目标跟踪对比实验，检验了该视觉跟踪系统和速度反馈pid控制算法的性能。
In the direct numerical control system of the computer, PID controller is realized by the PID controlling algorithm procedure.
在计算机直接数字控制系统中，PID控制器是通过计算机PID控制算法程序实现的。
This paper designs a model autonomous vehicle. Using fuzzy control algorithm, PID control algorithm and improved fuzzy control algorithm, the longitudinal control of autonomous vehicle is realized.
本文设计了一辆模型自动汽车，利用模糊控制算法、PID控制算法以及改进的模糊控制方法实现了自动汽车的纵向控制。
In view of the weak nonlinearity and time-delay characteristics of AMT clutch engagement position control system, DMC-PID cascade predictive control algorithm is applied to the system.
针对AMT离合器接合位置控制系统具有的时滞弱非线性特性，采用DMC-PID串级预测控制算法应用于该系统。
With the merits of both FUZZY control technology and PID control algorithm, the FUZZY-PID control system is designed to control the temperature of ceramic kiln.
结合FUZZY控制技术和PID控制算法的优点设计了FUZZY-PID 控制系统，对陶瓷工业窑炉的温度进行控制。
With the merits of both FUZZY control technology and PID control algorithm, the FUZZY-PID control system is designed to control the temperature of ceramic kiln.
结合FUZZY控制技术和PID控制算法的优点设计了FUZZY -PID控制系统，对陶瓷工业窑炉的温度进行控制。
At the basis of analysis of classical control methods, we optimize the control algorithm and deduce the digital PID control method of gas-magnetic bearing.
在对经典控制方法分析的基础上，优化控制算法，提出了气磁轴承的数字PID控制方法。
The implementation method of a neuron controller based on integral separation PID control algorithm is introduced.
介绍一种基于积分分离pid控制算法的神经元控制器实现方法。
The control system is based on PLC, the control algorithm is PID based on the expert controller.
该控制系统以PLC为核心，并采用基于专家控制器的PID算法。
Presents a control strategy basing on the combination of the conventional PID algorithm and the simulating human intelligent control (SHIC) algorithm.
给出了一种基于仿人智能控制(SHIC)算法和PID控制算法的联合控制方案。
According to the different requirement of simulation modeling, introduces the control algorithm of PID controller and some assistant functions.
根据仿真建模的不同需要，介绍了PID调节器的控制算法及一些辅助功能。
The paper presents a control strategy basing on the combination of the conventional PID algorithm and the Simulating Human Intelligent control (SHIC) algorithm.
给出一种基于仿人智能控制(SHIC)算法和PID控制算法的联合控制方案。
This system centers on PLC, and integrates the pulse-burning technology with PID incremental algorithm to implement control each parameter in the box stably.
该控制系统以PLC为核心，并结合脉冲燃烧技术和PID增量算法，实现了对炉内各个参数的稳定控制。
应用推荐