In the end, the average hydraulic pressure of bulging is given by the principle of virtual work.
最后运用虚功原理给出了胀形平均液压的解析解。
The general form of J-integral conservation law in three dimensions has been derived from the principle of virtual work.
本文由力学的普遍原理——虚功原理推导出了三维情况下J积分守恒的一般形式；
Based on balancing equation of framework of rock and soil and the principle of virtual work, the stress balancing equation can be acquired.
根据岩土体骨架的平衡方程和虚功原理建立应力场平衡方程。
In spite of the very close affinity between the variational theorems and the principle of virtual work the study of the former is worth-while.
尽管变分定理与虚功原理之间有很紧密的相似关系，然而对前者的研究仍然是有价值的。
In spite of the very close affinity between the variational theorems and the principle of virtual work, the study of the former is worth-while.
尽管变分定理与虚功原理之间有很紧密的相似关系，然而对前者的研究仍然是有价值的。
The static wind stability factor of T-Frame Bridge with double slander piers is derived according to the Principle of Virtual Work in Finite Displacement Theory.
根据有限位移理论中的虚功原理，推导了双薄壁墩T构在横向风力作用下的静力稳定系数的表达式。
Based on the third order zigzag displacement model, a bending theory for laminated composite plates in an initially stressed state is derived by use of the principle of virtual work.
基于三阶折线位移模型，利用虚功原理导出了含初始平面应力的层合复合材料板的弯曲理论。
This paper describes a method based on the generalized principle of virtual work to derive the hybrid model of finite element. An assumed-strain hybrid model was obtained.
本文提出用广义虚功原理的方法建立有限元的杂交模型，并具体导出了一种杂交应变模型。
According to the principle of virtual-work, the formula of electromagnetic force based on magnetic vector potential is deduced.
根据虚位移原理，推导出基于矢量磁势的电磁力计算公式。
The governing equations of the raft are obtained based on the thin plate theory and the virtual work principle.
筏板的控制方程由薄板理论和虚位移原理得到。
This paper discussed the work principle and key technique of Virtual Studio System.
该文主要讨论了虚拟演播室系统的工作原理及关键技术等。
In this paper, the tension bending coupling model is presented by virtual work principle, the effect of the bonding layer between beam and piezoelectric actuator is considered in the analysis.
利用虚功原理，建立了单面粘贴有压电致动器的梁结构的拉伸-弯曲耦合模型，在分析过程中，考虑了梁与致动器之间粘贴层的影响。
The distribution of local magnetic force is described with an equivalent node force, which is derived from an extended application of virtual work principle to FEM node.
该法将虚位移原理推广应用于有限单元的节点，从而得到用以描述局部电磁力分布的等效节点力。
Based on the virtual work principle and thin plate theory, the mechanical performance of the moving paper under gravity was analyzed by nonlinear FEM.
根据虚功原理和薄板度理论，对纸张在自重作用下的静动力学特性作了非线性有限单元法数值建模。
A set of difFerential equations and the corresponding boundary conditions are derived according to virtual work principle and the longitudinal displacement patterns.
根据所提出的位移模式，结合虚功原理推导出组合梁剪力滞效应微分方程以及相应的边界条件。
This paper puts forward the principle of complementary virtual work in the finite displacement theory of elasticity and provides a detailed proof thereof.
本文建立了有限变形弹性理论中的余虚功原理，包括此原理的提出与详细的证明。
Using the virtual work principle, this paper proved the reciprocal theorem of work of thin plates with small deflections, and obtained the formula of the natural frequency of square plates.
从虚功原理出发，证明了薄板小挠度弯曲问题的功的互等定理，并由此推出了求解矩形薄板自然频率的公式。
A method for the computation of local magnetic force in saturated ferromagnetic materials is proposed, based on FEM and virtual work principle.
研究考虑铁磁介质饱和时基于有限元和虚位移原理的局部电磁力算法。
On the ground of principle of virtual work, this paper put a new theoretical meth - od to solve question of balance by constrained equation.
本文在虚功原理的基础上，提出了一种利用约束方程求解平衡问题的新理论方法。
The precise formula of node force fitted second order distributed load is developed sing virtual work principle.
使用虚功原理和位移线性插值推导了满足二次分布力作用的精确节点力分配公式。
The principles of virtual work for deformable bodies can be obtained with facility by taking advantage of the well known principle of virtual displacement in analytical mechanics.
应用分析力学中质点系的虚位移原理，即可得到变形体的虚功原理。
And then the governing equations of the block dynamic system are deduced on the basis of the virtual work principle, the deformation compatibility condition and the constitutive relations.
随后，基于虚功原理、变形协调条件和本构关系，推导了块体动力系统的控制方程组。
By using of virtual work principle and the unit-load method, the elastic-plastic process of loading and deflection of a beam with one degree of indeterminacy under an even load is analyzed.
通过虚功原理和单位荷载法分析了均布荷载作用下一次超静定梁的弹塑性加载及变形过程。
A disassembly and assembly experiment system of the Marine purifier is built by Virtual Reality (VR) technology, which can show principle of work as well as disassemble and assemble of the purifier.
运用虚拟现实(VR)技术实现了船用分油机的拆装实验，可进行分油机各零件拆装、工作原理展示。
The determination of freedom less than the actual one may be find implicit constraint properly on the basic of the given one in using the virtual work principle to solve the problems.
由虚功原理解题时可在题中给定约束的基础上，适当考虑隐含约束，确定比实际少的自由度。
First of all, the nonlinear equation of structure is presented in this paper based on virtual work principle. It is thought that the Updated Lagrangian Formulation u.
首先，本文基于虚功原理，推导了结构几何非线性方程，指出更新的拉格朗日列士法U。
According to the principle of some missile autopilot work and automatic test, has developed this automatic test system of the missile automatic based on the virtual instrument.
根据某型导弹自动驾驶仪的工作原理和测试原理，研制了基于虚拟仪器的导弹驾驶仪测试系统。
According to the principle of some missile autopilot work and automatic test, has developed this automatic test system of the missile automatic based on the virtual instrument.
根据某型导弹自动驾驶仪的工作原理和测试原理，研制了基于虚拟仪器的导弹驾驶仪测试系统。
应用推荐