The process conditions were selected by using the orthogonal design.
设计正交试验优化合成二氧化钛的条件。
The process conditions for recovering carbon free waste paper were optimized.
对回收无碳复写废纸工艺进行了最佳工艺条件的优化实验。
Under the process conditions, the yield of the product can reach more than 98%.
在该工艺条件下，产品收率可达98%以上。
This paper studies the process conditions and flow of rice wine lees utilization.
研究开发利用黄酒糟的工艺条件和工艺流程。
The influence of the process conditions and the principle of preparation were discussed.
并对其工艺参数的影响和生产原理进行了讨论。
The reaction principles, the process conditions, effect elements and products performance are discussed.
讨论了反应原理、工艺条件的控制、影响因素及产品性能。
The process conditions of acid hydrolysis were practised, while optimal hydrolysis temperature was determined.
探讨了酸性水解条件。确定了适宜的水解温度。
The strength of the wool is not appreciably affected by carbonizing if the process conditions are carefully controlled.
如果碳化工艺做到了准确控制，羊毛的强度不会受到明显的影响。
Better finishing results are achieved by selecting proper catalyst and additives and optimizing the process conditions.
选择适宜的催化剂和添加剂，通过优化工艺条件获得较好的整理效果。
The specifications, preparation and control of the solution, and the influence of the process conditions were introduced.
介绍了以上三道工序的规范、溶液配置及维护、工艺条件的影响。
The process conditions in the stages of esterification, melt polymerization and solid state polymerization were discussed.
讨论了酯化反应，熔融聚合，固相聚合阶段的工艺条件。
The process conditions of pretreatment, corrosion prevention coating, decorative coating and film's performance were studied.
研究了镁合金的前处理、防腐涂装以及装饰性涂装工艺条件及其涂膜性能。
This paper deals with the process conditions, recipes and effects of the shortened pretreatment of medium and heavy cotton fabric.
对纯棉中、粗、厚织物短流程前处理的工艺条件，处方及效果作了全面介绍。
The process conditions, including presintering temperature, sintering temperature and time, cooling mode and pretreatment were studied.
对烧成过程（预烧温度、烧结温度及保温时间、降温方式）及预处理工艺进行了研究。
Based on the experimental data, the process conditions and selection of equipment of casein industrialization production were discussed.
以中试数据为依据，对豆酪素工业化生产的工艺条件、设备选型进行了探讨。
The process conditions for hydroxylation of phenol using TS - 1 zeolite as catalyst were optimized by the way of uniform design software.
采用均匀设计试验方法，对TS-1催化的苯酚羟基化反应条件进行了优化。
The actual lithographic process was simulated according to the process conditions, such as lithographic tools and the property of resist.
根据光刻机和光刻胶特性，模拟了实际的光刻过程。
The selection of material, formula and the process conditions were discussed in this paper the results showed that the performance was better.
文中对材料选择，配方设计和工艺条件进行了论述。各项性能指标进行了测试和试用，实验证明，效果良好。
One technique for the chemical nickel plating on the plastics surface was introduced. The process conditions of chemical plating were discussed.
介绍一种在工程塑料表面上进行化学镀镍的工艺方法，探讨了化学镀镍的工艺条件，有实用价值。
The process conditions of reclaiming chromium from electrodeposition chromium waste liquid using hydrazine hydrate as reducing agent were studied.
研究了用水合肼回收电沉积铬废液中铬的工艺条件。
The process conditions and effects for electrochemically treating metal dyeing wastewater are discussed, and the polar effect is analysed in deep.
讨论了电化学方法处理金属着色废水的工艺条件和效果，对电极效应作了深入分析。
The process conditions of removing Fe From Cu leaching liquor were studied by oxidation precipitation method. Its industrial practice was introduced.
研究了氧化— 中和沉淀法从铜浸出液中除铁的工艺条件，并介绍了工业实践。
This technology is simple and auto-operation is easy, but the level of product index is high, so the process conditions should be controlled strictly.
生产工艺简单，易实现自动化操作，产品指标要求高，生产中必须严格控制工艺条件。
The process conditions and mechanism of preparing expand graphite by using cheap fine flake graphite as raw material was primarily studied in this paper.
本文主要研究了利用成本低廉的细鳞片石墨制备膨胀石墨的工艺条件及机理。
With the extraction rate from millet oil bran as indexes, the process conditions for extracting millet bran oil by supercritical carbon dioxide was studied.
以谷糠油萃取率为考察指标，对超临界二氧化碳提取谷糠油的工艺条件进行研究。
The process conditions of argon plasma treatment for modified polypropylene fiber were discussed, as were the properties and morphology of the treated fiber.
探讨了改性丙纶经氩等离子体处理的工艺条件及处理后纤维的性能及表面形态。
This study method provided a reliable basis for raising the inclusion rate, decreasing the capsule materials in quantity and drawing up the process conditions.
本文的研究方法对提高包封率，降低囊材用量以及制定工艺条件提供了可靠的依据。
The experiment shows that the qualified product can be obtained when the raw materials can meet the requirements and the process conditions are well controlled.
实验表明，当原料满足一定的要求，控制好工艺条件，能够生产出符合要求的合格产品。
The process conditions of Penmedipham were studied in this paper, content of products reached 97 %, total yield reached 71.8 % through two-step synthesis process.
研究对合成甜菜宁工艺条件进行了探索，产品中甜菜宁原粉质量百分数97% ，两步合成总收率71.8%。
Properties and treatment of the luminous pigment, modified PP and the process conditions such as spinning temperature, drawing, heating setting were investigated.
并对生产所需的发光颜料性能及处理方法、聚丙烯改性和纺丝温度、拉伸、热定型等生产工艺进行了探讨。
应用推荐