The composite material has resulted in greater load carrying capacity, a reduced thermal expansion, greater wear resistance and fatigue endurance.
合成材料具有更好的承载能力，更低的热膨胀系数，更好的耐磨性和更好的抗疲劳性能。
By adjusting these two parameters, can be near zero coefficient of thermal expansion.
通过调整这两个参数，可以获得接近零的热膨胀系数。
Upon heating the zeolite, the normal siloxane linkage would also experience strain due to thermal expansion.
当加热沸石时，由于热膨胀作用，正常的硅氧烷键也会存在张力。
The mechanism of thermal expansion of hydraulic cement paste is also re searched with DSC/TG and XRD methods.
借助于DSC/TG和XRD测试手段，对水泥石的热膨胀性能变化规律进行了机理分析。
Instead of expanding when heated — as is normally the case — the material contracts, a phenomenon known as negative thermal expansion.
与正常材料不同的是，当加热时，该材料不是膨胀，而是收缩，表现出负的热膨胀现象。
Thermal expansion: Changes in ocean currents and surface air pressure will vary from region to region.
热膨胀：在不同地区的洋流变化和海表面气压也存在不同。
The heater can heat the gimbal - special joint which connects slider to HGA, the gimbal made from two stripes of different alloys with different thermal expansion.
加热器可以加热的万向节-联合特别是连接滑块的HGA的万向节从两个不同的热膨胀系数不同的合金条纹的。
External balanced thermal expansion valve works is based on the basis of force balance.
外平衡势热力膨帐阀的工作原理是建立在力平衡的基础上。
During the study we tried to lower the thermal expansion coefficient of cordierite by adding additives.
在本研究中，还试图通过添加外加剂来降低堇青石的热膨胀系数。
Besides negative thermal expansion, the researchers also found that changes in temperature lead to a significant variation in the porosity of the material, which is therefore highly controllable.
除了负的热膨胀效应，研究人员也发现了温度改变引起的材料多孔性的明显改变，因而这种多孔性就变得高度可控。
Designed to complete the composite coefficient of thermal expansion of the calculation and prediction functions.
设计完成对复合材料的热膨胀系数的计算和预测功能。
The casing is thus free to yield to thermal expansion by moving forward on special slide elements between the front-end brackets and the front bearing pedetal.
外壳通过位于前端支架和前轴承座之间的特殊滑动部件向前滑动，从而避免了热膨胀的影响。
This finding is in keeping with the expected performance based on the difference in thermal expansion coefficients between spacer material and float glass.
这个发现与基于间隔条材料与浮法玻璃之间热膨胀系数差异而预期的性能一致。
The function of the valve is to release any excess pressure from the system caused by thermal expansion of the water.
这种阀门的作用在于释放由于水的热膨胀导致的过大的压力。
In contrast with metal and thermoplastic material, which has a higher coefficient of thermal expansion (CTE).
相较于金属和热塑材料，什么材料具有更高的热膨胀系数(CTE) ？
If the valve body material can be welded, but very different thermal expansion coefficient, or changes in operating temperature range of a larger thread junction closure weld must be honey.
如果阀体的材料是可以焊接的，但膨胀系数差异很大，或者工作温度的变化幅度范围较大，螺纹连接部必须进行蜜封焊。
Metals are elements that can be defined by their properties, such as ductility, toughness, malleability, electral and heat conductivity, and thermal expansion.
金属是根据可锻性，刚性，可塑性，电热导通性以及热膨胀度等特征来定义的多种元素的复合物。
This thermal expansion, particularly in liquids, can create very large and dangerous pressures in equipment.
这种热膨胀，特别是液体中的热膨胀，会在设备中产生非常高而危险的压力。
The capacity matching and system's stability are two important aspect for the matching of thermal expansion valve with plate evaporator.
热力膨胀阀与板式蒸发器的匹配问题包括容量匹配和系统稳定性要求两方面的要求。
Heating stretching pipe hanger should be fixed oppositely to the direction of the thermal expansion.
有热伸长的管道吊杆，应向热膨胀的反方向偏移。
If the increased pressure is caused by thermal expansion, the pressure will immediately be relieved and the system will return to the set pressure.
如果压力增加，则说明原因就是热膨胀，此时要立即释放压力，让系统恢复到设置压力上。
To determine if this is the result of thermal expansion, try briefly opening the cold water tap.
为了确定是否是热膨胀引起的，可以短暂开启冷水龙头进行测试。
As thermal expansion conditions develop, pressure builds up to the setting of the relief valve. This will cause discharging of small quantity of water.
随着热量的增加，压力也随着增加，并达到安全阀的压力设置。此时将导致安全阀排泄出少量的水。
Also the ice mechanics parameters obtained under such conditions are employed to calculate ice thermal expansion stress.
并把此条件下得到的力学特性参数用于冰温度膨胀应力的计算。
From this reason the creep strain and the thermal expansion can be separately examined and added.
由于这两个性质，蠕应变和热应变可分开研究，而且可线性叠加。
The principle of the strain gauge technique for thermal expansion measurement was systematically investigated.
详细地探讨了应变片法测量材料线膨胀系数的原理。
The principle of the strain gauge technique for thermal expansion measurement was systematically investigated.
详细地探讨了应变片法测量材料线膨胀系数的原理。
应用推荐