For fabrication, a thin film process of high density routing and multi-chip assembly is adopted to meet the performance and structure requirements.
在制作上，根据性能和结构要求，采用了高密度布线、多芯片组装的薄膜工艺。
Weak erosion before plating, in a certain: remove metal parts in the solution of surface extremely thin oxidation film, and make the process of surface activation.
弱浸蚀：电镀前，在一定组成溶液中除去金属制件表面极薄的氧化膜，并使表面活化的过程。
A team led by physical chemist Mircea Cotlet created a transparent thin film using a relatively simple process.
由物理化学家米尔恰cotlet率领的团队使用相对简单的方法创造出了一个透明的薄膜。
The experimental circumstances, the preparing mechanism, and the structure and characteristics of the thin film in the process are studied.
并对制备过程中出现的实验现象、制备机理及薄膜的结构和特性进行了分析和研究。
Chemical passivation: will contain antioxidant parts in solution in processing, make the surface to form a thin film of the state of the process. Blunt.
化学钝化：将制件放在含有氧化剂的溶液中处理，使表面形成一层很薄的钝态保护膜的过程。
Recent research on the inner condensing wiped thin-film evaporator is mainly on the theoretical of the evaporating process, but unfortunately without certification by the experimental findings.
目前对内冷式刮膜薄膜蒸发器进行研究，一是以模拟研究为主，所得到的结论未经实验数据验证；
Metallization is the process of depositing a thin film of metal and patterning it to form the desired interconnection arrangement.
金属化是淀积一层薄薄的金属膜的工艺，将其制成模版用于形成所需的内部互连排列。
PLZT thin film without intermediate pre-annealing process displays (100)-preferential orientation.
没有中间温度预退火过程的薄膜，显示出（100）择优取向；
Wiped thin film evaporators are considerably described on the structure, basic functions, classification, advantages, process variables and high viscous operation.
详细介绍了刮膜薄膜蒸发器的结构、操作原理、型式和分类、特点、操作参数以及刮膜薄膜蒸发器的应用。
A new model is proposed to simulate the whole process of ultra thin crystal film growth.
建立一种新模型，模拟超薄晶体膜生长过程。
A simulated three dimensional thin film head field was utilized in the write process and a giant-magnetoresistive (GMR) head was used in the read process.
在写入过程中采用了模拟的三维薄膜磁头，在读出过程中用的是巨磁阻(GMR)磁头。
Potential variation of thin oil film in electrolyte is an electrochemical process.
薄层油膜在电解质中的电位变化是一个电化学过程。
The experiments show that the PZT ferroelectric thin film with pe-roskite structure can be produced using reasonable process parameters.
实验表明，采用合适的工艺参数能制备出具有钙钛矿型结构的PZT铁电薄膜。
The LiTaO3 thin film was chosen as infrared sensing film and prepared by a sol-gel process using lithium acetate and tantalum ethoxide as starting materials.
用醋酸锂和乙醇钽作为起始反应物，通过溶胶凝胶工艺生成了对红外敏感的钽酸锂薄膜，并详细讨论了基于钽酸锂薄膜的红外探测器件制备工艺。
The key process technology of integrated thin - film resistor, capacitor and passive assembly was introduced.
介绍了国外集成薄膜电阴器、电容器及无源组件的关键工艺技术的研究情况。
Polycrystalline silicon thin film solar cell by RTCVD on SSP substrate is prepared so as to simplify the process and lower the cost.
从简化步骤、降低成本的角度出发，采用快速热化学气相沉积（RTCVD）法在低纯颗粒带硅（SSP）衬底上制备出了多晶硅薄膜太阳电池。
Magnetron sputtering process has widely been applied to thin film preparation, during which, the quality of thin film is affected badly by the current stability of target.
磁控溅射技术在薄膜制备领域的应用十分广泛，而溅射靶电流的稳定性极大的影响溅射镀膜的膜层质量。
Since the growth process of thin film is of the random state, Monte Carlo method has naturally been used in the process of computer simulation for the growth of thin films.
由于薄膜的生长过程是一个随机过程，所以蒙特卡罗方法便很自然地被应用于计算机仿真薄膜生长这一过程。
The reason why tungsten wire is easy to break in the silicon thin film deposition process by hot wire deposition method was explained.
揭示了常规热丝法薄膜淀积工艺中热钨丝易断裂的原因。
To form a thin film of inert phosphate on the metal surface. Process to reduce the rate of corrosion.
在金属表面形成的惰性的磷酸盐薄膜。该工艺可以降低金属被腐蚀的几率。
It was shown that the corrosion resistance of ST14 sheet was close to that of SPCE sheet by the test, moreover thin film rust preventive oil should be applied in the mechanical process.
试验表明SPCE和ST14两种钢板防腐蚀性能相当，工序间，薄型防锈油可用于其表血防锈。
Thin film solar cell with low cost, simple manufacturing process, the requirements are relatively low and many advantages of the.
薄膜太阳电池拥有本钱低、制造工艺复杂、各方面要求绝对较低的诸多优点。
Finally, based on the simulated cell parameters, we designed a new SSP polycrystalline silicon thin film solar cell, and the specific process of the implementation process were discussed.
根据仿真所得电池参数，设计了一款SSP衬底多晶硅薄膜太阳能电池，探讨了工艺过程和条件。
Meatallized thin-film without a sense of style winding, special spray gold process, aluminum enclosure, fire-retardant epoxy resin sealed.
采用金属化薄膜无感式卷绕，特殊喷金工艺，铝外壳封装，阻燃环氧树脂密封。
Thus, by optimized the process and packaging technology can make thin film polarizing beam splitter to reach the application requirements.
由此可见，通过优化镀制工艺和封装工艺可以使薄膜偏振分束镜的指标达到使用要求。
Further disclosed is a process for fabricating an organic thin-film transistor device, preferably by relative low-temperature sublimation or solution-phase deposition onto a substrate.
进一步公开了优选通过相对低温升华或溶液相沉积到基底上来制造有机薄膜晶体管器件的方法。
In thin film photovoltaic modules' manufacturing process, energy consumption per unit watt is only counting for 30% of silicon cell's. The possible environmental pollution caused is negligible.
硅薄膜光伏组件制造过程中，其单位能耗(每瓦)仅为晶硅的30%，所造成的环境污染与晶硅电池的生产过程相比可忽略不计。
The paper had mainly described the theoretical principle, arithmetic process and implementation of GA. Besides, GA had been programmed in the MATLAB6.5.1 for optimal design of optical thin film.
文中着重阐述了遗传算法理论基础、运算过程及其基本实现技术，并通过在MATLAB6.5.1环境下对遗传算法进行编程，实现了光学薄膜遗传算法优化设计的功能。
The paper had mainly described the theoretical principle, arithmetic process and implementation of GA. Besides, GA had been programmed in the MATLAB6.5.1 for optimal design of optical thin film.
文中着重阐述了遗传算法理论基础、运算过程及其基本实现技术，并通过在MATLAB6.5.1环境下对遗传算法进行编程，实现了光学薄膜遗传算法优化设计的功能。
应用推荐