Fit for chamfering vertical work piece.
可用直角型工件倒角。
Fit for chamfering irregular shape and arc work piece.
可用不规则形状及圆弧形状加工件使用。
The percentage of powder that is deposited on the work piece.
粉末沉积在工件上的百分数。
After cutting, the cutting slag on the work piece should be cleaned.
切割后，工件上的割渣应清理干净。
High residual stress distribution zone lies in the center of work piece.
平板工件中心存在较大的残余应力分布区。
The movement experiment result indicated that the work piece is separated accurately.
运行实验结果表明，工件被准确分组。
These bubbles collect on the surface of the work piece and interfere with passivation.
这些气泡聚集在工件表面上阻碍了钝化作用。
Then I conduct a detailed analysis of the work piece and determine the Stamping program.
然后对工件进行了详细工艺性分析以及冲压方案的确定。
The shape precision of grinding wheel affects the surface finish of work piece directly.
砂轮的形状精度直接影响着工件磨削表面质量。
They come in many wire sizes depending upon the work piece and the type of finish that you want.
它们的各种尺寸是由被打磨加工的物件以及所需的成品类型来决定的。
Finite element difference method was used to simulate the temperature field of work piece during TSCR.
采用有限元差分法对连铸连轧生产过程的带钢温度场进行模拟。
The effect of grinding depth on work piece surface hardness and hardness layer depth is important factor.
磨削深度是影响工件表面硬度和磨削淬硬层厚度的主要因素。
Rot of the work piece is assured by a SIEMENS brushless Digitally Controlled servomotor with infinitely variable speed.
工件的旋转，由西门子无刷数控伺服马达控制，它可以用不同速度运行。
The surface of the hypoeutectic white cast iron of great wearable work piece in common use was treated by laser hardening.
对要求高耐磨的大型工件常用的亚共晶白口铸铁材料进行了不同条件的激光表面强化处理。
The hot work technique to be used and the control necessary to avoid unacceptable weakening of the work piece during the work.
待采用的动火作业技术及所需控制以避免作业过程中造成的不能接受的工件性能的削弱；
When abrasive grains impacted on the work piece surface, the top layer atomics are removed, plastic deformation appears at the same time.
纳米级的磨粒冲击到工件表面，在以原子级去除的同时伴随着塑性变形的发生。
We will fully conduct testing on every work piece to make sure the absolute precision of size, definitely matching mould size with product size.
我们制造每个工件都将做到检测，保证模具的尺寸绝对精密，模具的尺寸与产品的尺寸一定是相对应的。
Because the liquid nitriding the liquid and the work piece direct conduction heating, reduced the work piece heating-up time, raised the azotize speed.
液体氮化由于液体与工件直接传导加热，缩短了工件加热时间，提高了渗氮速度。
This welding process joints work pieces by melting the electrode and the base metal with the heat from the electric arc between the electrode and the work piece.
它是一种利用焊条与工件之间电弧产生的热量熔化焊条和母材而将被焊工件连接起来的焊接方法。
Lay out plate, sheet steel or other heavy metal and mark bending and cutting lines on work piece using protractors, compasses and drawing instruments or templates.
铺设莱板，钢板或其他重金属，用量角器，圆规和绘图工具或模板在工件上标记弯曲和切割线。
The paper is to explain why work piece will cause distortion in quenching treatment, to analyze six most factors of work piece distortion caused in heat treatment.
本文阐述了在淬火处理中工件变形原因，分析了工件在热处理过程中引起变形的六个主要因素。
The work piece can be clad with lagging materials immediately after overlay and adopt slow cooling method on the basis of different principle material and complicated shape of the work piece.
根据工基体材质的不同情况和工件形状的复杂程序，也可采用堆焊后立即有保温材料包覆，然后缓冷的处理方法。
Research in my lab has focused on how food becomes contaminated, and we've done some work on this particular piece of wisdom.
我所在的实验室集中研究食物是如何被污染的，我们已经做了一些工作来研究这一人类智慧。
It was a cunning piece of detective work.
那是一篇构思巧妙的侦探作品。
It feels good to have finished a piece of work.
完成一项工作让人感觉很好。
You're some piece of work, Jack, do you know that?
你知道吗，杰克？你真了不起。
When I produced this piece of work, my lecturers were very critical.
当我创作这件作品的时候，我的老师们批评甚多。
The book is a detailed and thorough piece of work covering all aspects of the subject.
这本书包括了这一学科的方方面面，是一部缜密翔实的大作。
I'll say this much for him—he never leaves a piece of work unfinished.
我要为他说句公道话—他从不半途而废。
I'll say this much for him—he never leaves a piece of work unfinished.
我要为他说句公道话—他从不半途而废。
应用推荐