介绍透平转子的可靠性设计方法。
介绍了叠板弹簧的可靠性设计方法。
研究了齿带传动的可靠性设计方法。
The reliability design of toothed belts gearing was studied.
本文提出了汽轮机零件和系统的可靠性设计方法。
This paper presents the reliability design methods of steam turbine parts and systems.
本文提出了透平叶片疲劳强度的可靠性设计方法。
A reliability design method is presented for fatigue strength of turbine blades.
本论文主要介绍了可靠性设计方法和优化设计方法。
This thesis describes the design and optimization of the reliability design method.
对一般可靠性设计方法进行分析，指出其存在的不足。
The general reliability design method is analyzed, its defects are pointed out.
应用可靠性设计方法，对球形容器的静强度进行分析。
By application the reliability design methods, the static strength of pressure spherical vessel is analyzed.
本文介绍了奥迪100轿车后螺旋弹簧的可靠性设计方法。
This paper presents the reliability design method for Audi 100 car 's rear coil spring.
将可靠性设计方法用于齿轮箱轴的设计，已显示了较好的效果。
The reliability method has been used in design of gearbox shafts.
基于不确定非概率凸模型，提出了轴静强度的非概率可靠性设计方法。
Based on the uncertain non - probabilistic convex models, the non - probabilistic reliability design of shaft on static strength is proposed.
对目前使用得最为广泛的计算机系统可靠性设计方法，进行了深入的探讨。
The prevailing designs that are used to improve the reliability of computer system are discussed.
介绍了电子产品可靠性设计思路、可靠性数据收集与分析，可靠性设计方法。
This article introduces the idea of electronic products reliability design, the collection and the analysis of reliable data, and the reliability design method.
以传统的振动设计方法为基础，提出了透平机械零件振动的可靠性设计方法。
This paper presents a reliability design method of turbine part vibration, based on conventional vibration design method for turbine parts.
给出了各种注浆工程的可靠性指标；给出了注浆工程的可靠性设计方法及步骤。
The reliability index of a variety of grouting projects and the reliability design method and procedure have been given.
应用可靠性设计方法，对压力试验时扁平绕带式容器初始静强度的可靠度进行定量分析。
By using reliability design methods, minimal reliability of virgin static strength of flat ribbon-wound pressure vessels at pressure test is quantitative analyzed.
利用优化设计和可靠性设计方法，提出变载荷圆柱螺旋压缩弹簧的可靠性优化设计方法。
Applying optimization design technology and the reliability theory a reliability-optimum design method of variable load cylinder helix compression spring is presented.
应用建立在概率统计理论基础上的可靠性设计方法，探讨了压延机辊筒刚度的可靠性问题。
Using the reliability design method based on mathematical statistics theory, the reliability problem on calender roller rigidity was discussed in this paper.
其全部机械设计采用了等强度、可靠性设计方法，初步达到了高效低成本生产加工的目标。
With equal strength, reliability design for all machines, the high efficiency and low cost production process was presented.
阐述了液压防爆绞车系统的可靠性设计方法，给出了可靠性模型框图，并进行了可靠性计算和分析。
This article elaborates the reliability design method of hydraulic explosion-proof winch system and gives the frame sketch of reliability model and performs an analysis for reliability calculation.
应用可靠性设计方法，对超高压圆筒耐压试验压力进行探讨，定量分析试验压力与影响因素之间的关系。
In this paper, by using reliability design methods, the test pressure of ultrahigh cylinder is studied.
应用可靠性设计方法，对超高压圆筒耐压试验压力进行探讨，定量分析试验压力与影响因素之间的关系。
In this paper, by using reliability design methods, the test pressure of ultrahigh cylinder is studied. It is analyzed what the fixed quantity relation of test pressure with influencing factor.
应用可靠性设计方法，对压力试验时钢制薄壁内压圆筒形容器初始静强度的最小可靠度进行了定量分析。
By using reliability design methods, minimal reliability of virgin static strength of steel thin wall cylinder during pressure test is quantitative analyzed.
应用可靠性设计方法，对压力试验时钢制薄壁内压圆筒形容器初始静强度的最小可靠度进行了定量分析。
By using reliability design method, the reliability range of virgin static strength of spherical vessel was quantitatively analyzed under the most severe pneumatic and hydraulic test conditions.
应用可靠性设计方法，对钢制外压圆筒形容器压力试验进行了研究，定量分析试验压力与影响因素之间的关系。
The test of external pressure is studied for steel-walled pressure cylinder by using reliability method. The relation of external pressure test and influencing factor is analyzed.
最后，根据起重机车轮的工作应力和疲劳强度的概率分布，采用疲劳可靠性设计方法，对车轮进行了分析计算。
Lastly, using fatigue reliability design method, this paper analyses the crane wheel according to the probability distribution of its working stress and fatigue strength.
探讨了在铰制孔用螺栓设计中，模糊变量与随机变量同时存在时，抗剪强度与挤压强度的模糊可靠性设计方法。
In the design of articulation hole bolt, the blur variable and random variable existing at the same time, the blur reliability design method of shear strength and extruding strength are approached.
从机械可靠性设计理论及模糊数学理论出发，给出了盘形制动器工作参数的模糊可靠性设计方法，并附有应用实例。
According to the reliability design theory and Fuzzy mathematics theory, put forward a Fuzzy reliability design method of working parameter for plate brake and give some application examples.
基于非概率可靠性理论，将稳健设计和稳健可靠性的思想和方法用于结构设计，提出了结构的稳健可靠性设计方法。
In this paper, based on the non probabilistic reliability theory and robust design approach, a procedure for the robust reliability design of structures is presented.
基于非概率可靠性理论，将稳健设计和稳健可靠性的思想和方法用于结构设计，提出了结构的稳健可靠性设计方法。
In this paper, based on the non probabilistic reliability theory and robust design approach, a procedure for the robust reliability design of structures is presented.
应用推荐