喷雾干燥技术的机理及工艺优化常常只能采用实验的方法来分析和探讨，缺乏理论研究，影响了喷雾干燥的技术经济指标。
The drying mechanism and technology optimization of spray drying are generally studied by experiments. And spray drying lacks theory research, which affects its technical economic index.
从材料的结构、成分、性能、加工工艺过程等一系列的研究都是实验的结果。
A set of research from structure, constituents, performance and machining process of materials are all the results of experiment.
对珩磨精密加工工艺进行了实验研究，分析了粗珩加工中网纹角、工作压力、珩磨速度与材料去除率的关系。
Honing experiments are executed and the relationships between reticulate cross-angle, honing pressure, honing rates and material removal rate are analyzed in rough honing.
研究结果对该类推进剂配方设计和工艺参量选择提供了必要的实验依据。
The test results provide experimental basis for formula design and technological parameter selection of NEPE propellant.
在实验研究的基础上给出了作为饲料和食品加工的工艺流程及相应的工艺装备。
On basis of experiment and research the technological process for feed and food processing and corresponding equipment are presented.
本论文研发了一套通用粉末快速成形平台并对SLS覆膜砂快速成形工艺进行了实验研究。
In this dissertation, it develops a set of platform for general powder instant prototyping and takes experimental studies to SLS coated-sand technics.
通过一系列的实验比较和分析研究，客观地评价了三维编织工艺参数对复合材料拉伸性能的影响。
In this paper, based on a series of experimental comparison and analysis, the influence of three dimensional braiding technology parameters on the tensile properties of composites is evaluated.
对大豆芝麻乳酸菌发酵饮料的配方和生产工艺进行了实验研究。
In this paper, the formulation and process of Lactobacillus fermented beverage from soybean and sesame were studied.
通过气浮实验和反渗透实验研究，确定了最佳工艺参数。
Work out the optimum craft parameters by air floatation experiment and reverse osmosis experiment in the laboratory.
对丙酮、四氢呋喃、三乙胺、水混合物的分离进行了工艺流程设计和实验研究。
The process flow was designed and experimentally studied for separation of acetone, tetrahydrofuran (THF), triethylamine and water mixture.
文章对蜡印布生产中所涉及的多种印制工艺进行了研究分析，通过实验及多年的生产经验确定了提高蜡印质量的工艺方法。
Some wax printing technology parameters are studied and analysed. Some technological ways to improve wax printing quality are determined from test and many year′s production experience.
实验研究对于其它铸造工艺条件下二次非金属买物的控制亦有一定的参考价值。
This experiment also has reference value to the control of secondary inclusion in other casting process conditions.
介绍了RFCC进料乳化工艺实验室研究。应用亲油亲水平衡理论，模拟工业生产装置，筛选出分散剂和乳化剂的类型及用量。
The studies of emulsifying technology which used in the feed of RFCC are introduced by applying HLB balance theory and simulating the equipments of producing in industry.
用新的缩分取样公式研究了提金工艺实验样品湿法分析金的准确性。
Furthermore, the accuracy of wet assay of gold in experimental sample was studied by means of new reduction sampling formula.
在高碱度条件下，运用正交组合分析手段，对钒钛磁铁精矿的烧结工艺进行烧结实验研究分析。
Using analysis methods of orthogonal combination under the conditions of high alkalinity, sintering process on Vanadic Titanomagnetite are researched.
阐述了中型电机成型线圈的热压成型工艺，在实验的基础上，研究并设计了中型电机成型线圈热压成型装备。
The hot- pressing technology is introduced and the hot- pressing equipment is designed for formed coils of middle sized motors based on experiment.
通过以盐浆洗液为原料制取硫酸钾的实验研究，并通过相图分析和实验论证了该工艺的可行性。
Laboratory study on preparing potassium sulfate from the Washing Liquor of salt slurry is introduced. Its feasibility is described through the analysis to phase diagram and experiment.
设计了铝合金铸轧工艺模拟的实验装置，研究了在该试验条件下，铝合金变形组织与工艺参数的关系。
An experimental instrument for simulating the roll-casting process was designed, and the effect of processing parameters on the microstructure of al alloy was studied.
对反应合成、相转移催化机理和合成工艺进行了研究和实验探索，经条件优化实验确定了较佳的合成工艺参数。
The mechanism of the reaction and that of phase transfer catalysis were studied. The process parameters were selected by optimum experiment.
报道了酶法水解蚕蛹蛋白工艺的实验研究，并对水解产物进行了分析。
This paper reports the technology investigation for hydrolysis of chrysalis's protein and the analysis of its products.
针对国内生产水性丙烯酸树脂的工艺问题，结合实验研究情况确定出生产水性油墨所需的丙烯酸树脂的中试工艺条件。
Aiming at the technology problems of domestic water-soluble acrylic resin production, the technology conditions of moderate production for waterborne inks are confirmed based on the experimental data.
对涂层的组织形貌和相组成进行分析，并研究了实验工艺对涂层结构的影响。
The effects of experiment parameters on the phase constitution and the structure morphologies of the coating was studied.
用压缩空气模拟氩气搅拌，对LF V -40型钢包精炼炉底吹氩气工艺进行水力学模型实验研究。
Hydraulic model investigation was conducted by using compressed air to simulate the bet-tom-blown argon stirring process of LFV 40 ladle refining furnace.
以包铜钢线为研究对象，介绍了反向凝固复合工艺特点，系统地研究了各工艺参数对包复比的影响，并对实验结果作了理论分。
Based on the production of copper clad steel wire, the characteristic of inversion casting is introduced, and the rule of parameter influencing cladding specific value systematically value studied.
结合COMI炼钢工艺冶金反应热力学分析、物料及能量计算及热态实验研究，证实了COMI炼钢工艺的可行性。
Based on metallurgical reaction thermodynamic analysis, materials and energy calculation and thermal test of COMI steelmaking process, the feasibility of COMI steelmaking process could be confirmed.
结合COMI炼钢工艺冶金反应热力学分析、物料及能量计算及热态实验研究，证实了COMI炼钢工艺的可行性。
Based on metallurgical reaction thermodynamic analysis, materials and energy calculation and thermal test of COMI steelmaking process, the feasibility of COMI steelmaking process could be confirmed.
应用推荐