• 采用反相悬浮合法合成聚丙烯酸高吸水性树脂

    Inverse suspension polymerization was adopted to synthesize sodium polyacrylate super hydroscopicity resin.

    youdao

  • 通过比较选择聚丙烯酸超细重质碳酸钙最佳分散剂

    By comparison, polyacrylate sodium is an optimum dispersant for ultrafine ground calcium carbonate aqueous dispersions.

    youdao

  • 共混吸水合物聚丙烯酸分散在苯乙烯基体中形成。

    The blends are composed of absorbent sodium polyacrylate (PAANa) particles and PS matrix.

    youdao

  • 采用乳液合法合成自交联型丙烯酸高吸水性树脂

    A super absorbent resin, which is self-cross-linking polyacrylic acid sodium salt, was synthesized by means of counter emulsion polymerization.

    youdao

  • 合成了聚丙烯酸电解质测定基准料浆粘度影响

    Then Sodium polyacrylate electrolyte was prepared and its influence on the viscosity of the reference slurry was tested.

    youdao

  • 研究了改性聚丙烯酸不同无机湿性盐类共混物吸湿性能

    The moisture absorption property of the modified sodium polyacrylate and inorganic salts mixture was studied.

    youdao

  • 聚丙烯酸模仿生物矿化有机基质对无机晶体生长调制作用

    Sodium polyacrylate mimicked the role of organic matrix in modulating crystal growth in biomineralization.

    youdao

  • 综述了丙烯酸特性以及对影响增稠特性的因素进行了研究。

    The factors which influenced thickening character of the sodium polyacrylate were studied.

    youdao

  • 试验表明丙烯酸钛酸酯可以使铁红粉体达到很好的分散效果;

    The experiment indicates that the polyacrylate sodium and the titanate can both disperse the oxide iron powder notably;

    youdao

  • 分子量聚丙烯酸是一重要阴离子型凝剂,工业有着广泛的应用。

    Polyacrylate sodium with high molecular weight is widely used as one kind of important anionic flocculation in industry.

    youdao

  • 得出了各反应因素丙烯酸分子量影响趋势程度,初步讨论了其分散机理。

    The trend and degree of the influence on sodium polyacrylate weight by the reaction factors are obtained.

    youdao

  • 研究单体浓度中和辐照剂量等因素交联丙烯酸吸水性影响

    The influences of monomer concentration, neutralization degree, crosslinking agent and radiation dosages on absorption performance of crosslinking poly (sodium acrylate) were studied.

    youdao

  • 实验结果表明聚丙烯酸分散剂可制得固含量较高的超细重质碳酸钙分散体系。

    The experimental results demonstrate that high-solid-content ultrafine ground calcium carbonate aqueous dispersions can be obtained by employing polyacrylate sodium as dispersant.

    youdao

  • 自制了丙烯酸复合增强研究陶瓷坯体强度地砖生产成品率影响。

    Compound ceramic body reinforcing agent with sodium polyacrylate was prepared and its effects on the strength of ceramics body and rate of finished product of floor tiles were studied.

    youdao

  • 丙烯酸载体上,微生物可以长出单菌落数量琼脂平板统计学显著差异

    On the polyacrylate sodium vectors, the microorganisms could grow in independent colony and the colony number was not markedly different in statistics compared with agar plates.

    youdao

  • 溶剂,过硫酸铵-亚硫酸氢氧化还原引发体系,研究了分子质量丙烯酸合成

    Syntheses of low - molecular weight polyacrylic acid sodium with water as solvent and APS - SHS as REDOX initiator are studied.

    youdao

  • 丙烯酸氢氧化为原料,以无机磷酸盐转移合成系列分子质量丙烯酸分散剂。

    A series of low molecular weight polyacrylic acid sodium solutions was synthesized by using inorganic phosphate as chain transfer agent on the basis of acrylic acid, sodium hydroxide and so on.

    youdao

  • 最后合成丙烯酸水玻璃、三磷酸一定比例复配合成性能优、成本新型复合分散剂

    Finally a new type of synthesized dispersing agent with better performance and low cost was obtained by proportionally mixing the sodium polyacrylate with water glass and so...

    youdao

  • 介绍分子量丙烯酸合成分子量测定方法,以及聚丙烯酸钠作为助洗剂吸水性树脂作用机理

    This paper discusses synthesis of high molecular polyacrylate sodium and molecular determination method, action mechanism as washing aid and high water absorbing resin also are discussed.

    youdao

  • 六偏磷酸聚丙烯酸钠分散剂的浇注良好作用分散剂不同时其促凝机理也不同

    Both of salt magnesium and salt aluminum have good accelerating effects on the castable with SHP or SPA as dispersant, but the accelerating effect is different.

    youdao

  • 模拟降雨条件下,添加0.02%聚丙烯酸钠0.025%6501组合沉积量最高,耐雨水冲刷能力最强

    The combination 0.025% of agent 6501 with 0.02% agent had the highest deposition when there was a rainfall, it had the strongest rainfastness.

    youdao

  • 研究了加入高岭土聚丙烯酸复合高吸水性树脂合成中反应温度中和、交联用量、引发剂用量、高岭土添加量等影响树脂吸水性能的主要因素。

    The influence of reaction temperature, neutralization degree of acrylic acid and amounts of crosslinking agent, initiator, dispersant and kaolin on the absorbency of the composite was discussed.

    youdao

  • 采用溶液法制备了离丙烯丙烯酸稳定性结晶性能进行了表征

    Sodium acrylate grafted polypropylene wax was synthesized by solution technique, and its thermal stability and crystallization behavior were characterized.

    youdao

  • 采用溶液法制备了离丙烯丙烯酸稳定性结晶性能进行了表征

    Sodium acrylate grafted polypropylene wax was synthesized by solution technique, and its thermal stability and crystallization behavior were characterized.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定