Stir before using the paste, stirring into the alloy powder.
使用前将焊膏搅拌均匀，倒入合金粉搅拌。
A new rare-earth copper alloy powder for 24k gold imitation is prepared.
研制新型仿24K金稀土铜合金粉材料。
The results show that induction remelting technique is satisfied to use free - spraying alloy powder.
结果表明：对于免喷涂合金粉末采用感应重熔工艺是完全可行的。
The sintered state of honeycomb filled with alloy powder had great influence on the sealing performance.
蜂窝填充粉末的烧结状态对其封严性能及使用寿命有十分重要的影响。
The braze of stainless steel joints with wide clearance is made by pre filling alloy powder into the gap.
采用先在钎缝间隙中预填合金粉，然后在钎缝外置放钎料进行钎焊的方法，解决不锈钢接头宽间隙的钎焊问题。
A newly developed self fusion Cu-based Cu-Ni-Sn alloy powder and the PTA coating technology are described.
研制成功了一种新型铜基自熔性合金粉末，在高强度钢基体上采用等离子喷焊工艺制备焊层。
Uses: Mainly used for alloy powder for hydrogen storage and used for battery made of Nickel metal hydride.
用途：主要用作储氢合金粉和镍金属氢化物电池。
Surface thermal spray weld process with alloy powder is a new technology of surface protecting and hardening.
合金粉末表面热喷焊技术是一种新的表面防护和强化工艺。
The future of the ti alloy parts with high properties and low cost by ti alloy powder with hydrogen was reviewed.
展望了用含氢钛合金粉末成形工艺制备高性能、低成本钛合金制件的前景。
Various laser processing parameters and different composition of alloy powder were chosen to get a perfect coating.
通过对激光工艺参数及合金粉末比例的优选，可以得到较理想的熔覆层。
Detail analysis of technological parameters influencing particle shape and distribution of alloy powder has been made.
对影响合金粉末颗粒形状和粒度分布的工艺参数进行了较为详细的分析。
The alloy powder was produced by gas atomization. P/M material samples were made by pressing and sequent vacuum sintering.
通过气喷气冷法制取合金粉末，用压制后真空烧结的方法制备高铝锌基合金粉末冶金材料。
Other alloy powder or mineral may be also added into the welding rod material to raise some performance of the welding rod.
为了增加焊条的某些性能，还可在其组分中添加其他合金粉或矿物质。
XRD analysis revealed that MgO was not formed during ball milling of the magnesium alloy powder under the protection of ethanol.
将镁合金切屑在无水乙醇的保护下进行球磨，XRD分析显示镁合金粉末经过球磨没有被氧化。
The atomized powder was improved by high-energy ball milling, then the radar absorbent of flattened magnetic alloy powder was made.
采用气雾化法获得的合金粉，通过高能球磨处理工艺制备了扁平化磁性合金粉体雷达波吸收剂。
In this paper, the preparation of nanosized iron alloy powder was described mainly, and the research aspects in future is pointed out.
着重阐述了纳米铁合金粉末的制备方法，并指出了这一领域今后研究的方向。
This paper introduces the principle of making high temperature alloy powder, its procedure and technical parameters in using this device.
本文介绍利用该装置制取高温合金粉末的原理、过程和技术参数。
The invention discloses alloy powder and a preparation method thereof, belonging to the technical field of the preparation of alloy powder.
本发明公开了属于合金粉末的制备技术领域的一种合金粉末及其制备方法。
A kind of new surfacing material was developed with pre-diffused alloy powder as main constituent, and the rolling mill guides were repaired.
以预扩散合金粉为主要材料研制了一种导卫板堆焊材料，并对某厂轧机导卫板进行了堆焊修复。
Differential scanning calorimetry (DSC) was used to characterize the desorption-recombination behaviour of the as-disproportionated alloy powder.
采用差示扫描量热法(dsc)，分析了歧化态合金粉末的脱氢-再结合行为。
Using the alloy powder coating with different sizes and keep-warm slice, the functional coating was cast-oozed on the surface of thin wall casting.
使用不同粒度的合金粉末涂层并辅以保温片，对薄壁件进行铸渗。
In this paper, the influence of surfacing technology and material on the quality of light beam Ni based alloy powder surfacing layer was investigated.
研究了堆焊工艺和材料对镍基合金光束粉末堆焊质量的影响规律。
The results show that the grain size of produced ZA20, ZA27 alloy powder for cold spray is homogeneous, and the phase of the coat is equal axis crystal.
研究结果表明，制备的冷喷涂用ZA20、ZA27合金快凝粉末粒度分布均匀，组织为细小的等轴晶；
The invention discloses a leadless and no-halogen tonal, comprising following components with percent by weight: alloy powder 80-98 and welding flux 2-20;
本发明公开了一种无铅无卤素锡焊膏，包括以下重量份组分：合金粉 80-98，助焊剂2-20；
The absorbent was analysed by SEM and XRD and the magnetic alloy powder-paraffin sample was made a complex permeability measurement in the radar frequency.
对吸收剂进行SEM与XRD分析，并对磁性合金粉体-石蜡样品进行雷达频带复磁导率的测试。
The results indicate that the hardness and wear resistance of deposited layers of nickel-based alloy powder increased evidently compared with the substrate.
试验结果表明：镍基合金粉末堆焊层硬度和耐磨性较基体有显著提高。
There are many factors effecting on the formation of the blow holes, such as substrate surface state, alloy powder system, crystalline growth velocity, etc.
气孔形成与多方面因素有关，包括基体表面状态、冶金材料体系和结晶速度等。
The invention discloses steel plate overlaying welding equipment, in particular to automatic open arc overlaying welding equipment with special alloy powder.
本发明公开一种钢板堆焊设备，尤其涉及一种明弧添加特种合金粉自动堆焊设备。
The results show that the increase of the milling time, the vibration frequency and the charge ratio can effectively decrease the grain size of the alloy powder.
结果表明：球磨时间延长，振动频率提高和球料比的增大可有效地降低合金粉的晶粒尺寸。
The formation technologies of Ti alloy powder with hydrogen, properties of formed parts as well as the work mechanism of hydrogen in the Ti alloy powder were described.
介绍了置氢钛合金粉末成形工艺、成形件的性能以及氢的作用机制。
应用推荐