It's an aluminum casting and has been very durable.
这是一个铝铸件,并已非常耐用。
Throttle Body Assemblies described here use an aluminum casting.
这里描述的节气门体组件使用的铝铸件。
Direct quench can also be used with the sequential aging of aluminum casting alloys.
直接淬火还可以与铸铝合金的连续时效一起使用。
The working temperature of sand cores for aluminum casting have been tested in the present work.
对铝合金铸造用砂芯的工作温度进行了分析和测定。
With the aluminum casting actuator box body, the utility model can effectively avoid the corrosion of harmful gas.
本实用新型由于设置了铝铸执行器盒体,可以有效地避免 有害气体的腐蚀。
The results showed that high peak value and long transfer time are helpful to decrease the porosity in the aluminum casting.
研究发现,热解产物传输曲线峰值高、传输时间长,有利于减少铝件的针孔。
The excellent aluminum casting-rolling strips mainly refer to those having good inherent organizational performance, the bright and clean surface and the free of the small edge cracks.
优质铝铸轧带材就是指具有优良的内部组织性能、光洁的表面质量以及较小裂边的带材。
The paper mainly analyzes the primary aluminum casting proportioning, studies the calculation method of proportioning and put forward the alternative of optimized proportioning aluminum.
对铝电解铸造配料进行了详细分析,研究了配料算法,提出了优化配铝方案,并对此方案的软件实现作了简要介绍。
During the cage form rotor three phase asynchronous electric motor manufacturing, the electric and mechanical properties of motor are directly influenced by quality of aluminum casting of the rotor.
在电机制造中,笼形转子三相异步电动机的转子铸铝质量的好坏直接影响电机的性能及力能指标。
It's been quite a few years since Cymat Technologies Ltd. built the world's first commercial stabilized aluminum foam (SAF) casting line-1998 to be exact.
Cymat公司铺设了世界上成品泡沫铝(SAF)最早的生产线已经有些年头了,准确地说是,在1998年铺设了这条铸造生产线。
Casting reel frames are usually made of either graphite or aluminum.
抛饵轮的框架通常不是碳素的就是铝的。
With the fabricated preforms, the pressure casting process of porous aluminum alloy was studied.
利用所制备的预制块,研究了多孔铝合金的加压铸造工艺。
The coating behavior of aluminum alloy lost foam casting ( LFC) process has been investigated.
研究了铝合金消失模铸造过程中的涂料行为。
Shell aluminum alloy die-casting molding, high strength, high voltage electrostatic powder coating, corrosion resistance.
外壳铝合金压铸成型,强度高,表面高压静电粉末喷涂,耐腐蚀。
Aluminum ultrasound casting; ultrasound power; frequency tracking; power control.
铝合金超声铸造;超声波电源;频率控制;功率控制。
The equipment, mould structure and processing of manufacturing aluminum alloy handle stems of bicycle using extrusion casting method are presented.
介绍了挤压铸造制造铝合金自行车把立管的设备结构及工艺流程。
Company has mold, injection molding, metal, aluminum alloy die-casting and other ancillary works.
公司下设有模具、注塑、五金、铝合金压铸等配套厂。
Due to excellent casting performance and lower cost, cast aluminum is widely used in modern industrial production.
铸铝由于有其优异的铸造性能及成本较低,已广泛地应用于现代工业生产中。
During continuous casting of high aluminum steel, composition and properties of mold fluxes change obviously due to the slag-steel reaction.
高铝钢连铸过程中,钢渣反应将导致连铸保护渣成分和性能发生较大的变化。
Based on these, the technique factors that influence the foam aluminum pore structure in the infiltration casting were studied.
在此基础上,对渗流铸造法中影响泡沫铝合金孔结构的其他工艺因素也进行了研究。
The company is a to cast steel factory, cast and copper factory, aluminum plant, casting plant such as lead scrap metal and waste plastic crushing, pumping tablets for one processing plant.
本公司是一家以铸钢铁厂、铸铜厂、铸铝厂、铸铅厂等废金属和废塑胶破碎、抽粒为一体的加工厂。
Products: Aluminum Die-casting, Aluminum Profiles, Sheetmetal, Machining, Glass, Plastics, Welded parts, Electronics and Mechanical Subassemblies.
产品:铝压铸,铝型材,金属,机加工,玻璃,塑料,焊接的和电子零件及组装等。
The coating behavior of aluminum alloy lost foam casting (LFC) process has been investigated.
研究了铝合金消失模铸造过程中的涂料行为。
The hot dip aluminum has been carried out to research the formation and dissolution of the intermetallic layer between die casting die and aluminum alloy.
为了研究压铸模与铝合金金属间化合物的形成与分解过程,进行了热浸铝试验。
Numerical simulation of filling and solidification of large aluminum alloy support frame in indirect casting was conducted based on FDM.
基于有限差分法,对大型铝合金支架间接挤压铸造充型和凝固过程进行了数值模拟。
Origination of casting defects in aluminum alloy motorcycle damping cylinder in metal mould casting was analyzed.
分析了金属型铸造铝合金摩托车减震筒铸造缺陷的产生原因。
A transient heat-transfer mathematic model was established using a Lagrangian coordinate system in twin-roll aluminum trip casting and rolling process.
采用拉格朗日随体坐标建立了铝双辊铸轧过程瞬态传热数学模型。
It is suitable for roughing to finishing machining of heat-resistance alloy, ti alloy, casting iron and aluminum alloy.
适用于耐热合金、钛合金、铸铁和铝合金的粗加工到半精加工。
It is suitable for roughing to finishing machining of heat-resistance alloy, ti alloy, casting iron and aluminum alloy.
适用于耐热合金、钛合金、铸铁和铝合金的粗加工到半精加工。
应用推荐