The mathematical model of longitudinal vibration bars is directly used for the dynamic analysis of helical springs.
直接把均匀杆纵向振动的数学模型用于弹簧的动力分析。
It is also compared that the difference between three-dimension and two-dimension model of building in vibration analysis.
比较了建筑三维模型和二维模型用于振动计算的区别。
Analysis and numerical result shows that the laws of mechanical vibration control system are realized in this circuit model and the model can perform expected function.
分析及数值结果证明该电路模型实现了机械振动控制系统的本身的规律，可以实现预期的功能。
With the dynamic optimum analysis of the frame FEM model, a control technique of the lateral vibration is introduced.
通过对车架有限元模型进行动力优化分析，介绍了轻型货车横向振动的控制方法。
The finite element model of body-in-white of a SRV is established. The implicit frequency and vibration types are obtained by modal analysis.
建立了某运动休闲车(SRV)白车身的有限元模型并进行了模态分析，得到了SRV白车身的固有频率和振型。
Having set up the dynamic model in ADAMS, this paper uses the method of vibration mode analysis to study the isolating ability of the mounting system.
运用ADAMS软件进行了动力总成悬置系统的模型仿真验证，通过振动模态分析的方法研究了优化前后悬置系统的隔振性能。
Based on the field test data, the vibration records were systematically analyzed, and the correctness of the result of analysis by the theoretical model was verified.
通过原位测试实验数据，系统分析获得的振动记录，从实验上证实了理论模型分析结果的正确性。
Full wave model phase analysis technique may involve wide subjects, but this paper only deals with the analysis methods of ray, amplitude, wave spectrum and particle vibration pattern.
全波模型震相分析法研究的内容是非常广泛的，本文仅对其中的射线分析、振幅分析、波谱分析、质点振动方式分析等方法进行了探讨。
A mathematics model of simulating rubber nonlinear hysteresis characteristics is advanced based on the analysis and disposal of cars' rubber supporting vibration test data.
基于轿车橡胶支承振动试验数据分析和处理，提出了模拟橡胶非线性迟滞特性的数学模型。
According to random vibration theory, the concentrated parameter analysis model of INS (Inertial Navigation System) absorber for random vibration is presented.
利用随机振动理论，建立了惯导减振系统的集中参数分析模型。
On the basis of analyzing the main cautions to the spindle's vibration, measure and analysis are done to Model DFG2 spindle.
在分析了影响锭子振动主要因素的基础上，对DFG2型锭子进行了测试和分析。
The vibration mechanical model of gantry and bridge crane is established by means of structural analysis.
通过对门桥式起重机的结构分析，建立了其振动力学模型。
A random vibration system model of "road-crawler type vehicle-operator" is needed for the analysis of dynamic characteristics of new type viscoelastic crawler construction machinery.
为对新型粘弹性履带式工程机械的动态特性进行分析，需建立“路面—履带式车辆—驾驶员”随机振动系统模型。
An optimal control model of an automotive seat vibration system is set up and an experimental analysis of the control system is carried out by electronic circuit simulation.
建立了汽车座椅振动系统的最优控制模型，并利用电模拟方法对控制系统进行了实验分析。
This paper presents a vibration model of bearing with outer race waviness and deduces the response of bearing by applying the method of analysis mechanics.
利用分析力学方法建立了外圈有波纹度的球轴承振动模型，并求出了响应。
The free vibration analysis is conducted by using arch-frame structure model for brick arch floor, from this the local vibration and the whole vibration of the arch are studied.
对砖拱楼盖，采用拱框结构力学模型进行了自由振动分析，并探讨了局部振动和整体振动等同题。
The established model can be applied to the analysis of vibration and dynamic load of vehicles.
轮胎包容特性模型可用于汽车振动分析与动态载荷分析。
Reducing the order of a large structural finite element model is important in improving the efficiency of finite element analysis in the field of structural dynamics and vibration.
对大型复杂结构振动有限元模型进行减缩降阶，是使结构有限元模型可有效地用在结构动力分析和振动计算方面的一个重要措施。
Through beam structure finite unit dynamic analysis and experiment of RC model beam, we build the relationship between beam bridge attached load vibration characteristics and damaged model.
利用杆件结构有限元动力分析计算，并通过模型梁试验，建立起简支梁在附加荷载作用下振动特性与破损模态之间的关系。
As the radial vibration of stator is the origin of the acoustic noise of SRMs, model analysis of stator vibration is the effective way to the research for low acoustic noise.
由于定子的径向振动是开关磁阻电机噪声的主要根源，因此定子振动系统的模态分析是降噪研究的有效手段。
On the basis of the above analysis, this paper establishes dynamic model on the longitudinal vibration of the overall belt conveyor system with finite elemental method.
在以上分析的基础上利用有限元法建立整个带式输送机系统纵向振动的动力学模型。
It is necessary to have model analysis for it in order to study the property of vibration property.
为了研究其振动特性，对其进行模态分析是十分必要的。
In this paper, we get the optimized matching parameter through the analysis of the vibration characteristic on the base of dynamical model of the vibrational grind.
本文通过对振动碾动力学模型的振动特性分析得出合理的质量匹配参数的优化。
The model is used in modal analysis and we get the sensor's first four modes of vibration and its natural frequencies.
对该模型进行模态分析得出了它的前四阶振型和固有频率。
Theoretical analysis and experiment show that the optimum vibration parameters and drilling parameters can be seeked at the different stages of the drilling process by proposed simulation model.
理论分析和实验表明：应用该仿真模型，能在振动钻削过程的不同区段寻找最优的振动参数和切削参数。
Through feedback control analysis and simulation, it is proved that the mechanical model is appropriate and the scheme of active vibration isolation system is feasible and effective.
通过反馈控制分析和实验，表明：采用主动隔振可以明显提高机床减振性能，尤其对低频隔振效果较好。
In this paper, the lateral vibration dynamic analysis model of continuous box girder viaduct is presented in which the bending, torsion and distortion of box girder can be considered.
本文提出了可以考虑箱形梁弯曲、扭转、畸变多种因素的梁-墩系统横向振动的动力分析模型。
In this paper, the lateral vibration dynamic analysis model of continuous box girder viaduct is presented in which the bending, torsion and distortion of box girder can be considered.
本文提出了可以考虑箱形梁弯曲、扭转、畸变多种因素的梁-墩系统横向振动的动力分析模型。
应用推荐