This is a graph of the rotation Angle of each rotation is 90 degrees, is this function.
这是一个图形的旋转，每次旋转的角度是90度，就是这个功能。
Angle a number, passed by reference, that identifies the Angle of rotation, in radians, of the quaternion.
一个按引用传递的数值，标识该四元数的旋转角度(以弧度为单位)。
Want no shape, the joining together of rotation Angle is the first selected object must be horizontal, so shape combination when we first select leaves and selected other shapes.
想得到无旋转角度的拼接形状，则第一个选中的对象必需是水平的，因此形状组合时我们才要先选中叶子再选中其它形状。
So, it is necessary to have a stabilized platform in the tool to obtain steady angle adjustable and independent to the rotation of drilling string.
因此，在调制式旋转导向工具中，就必须设置一个不受钻柱影响的、可以自动保持和调整工具面角度的稳定平台。
A convenient method to choose the direction of rotation Angle of quantum rotation gate is proposed.
针对量子旋转门的旋转角方向的选择，提出了一种简易快捷的新方法。
And the designed sensor can also be used to measure some other types of linear displacement or rotation Angle.
所设计的传感器稍作改动，也可以用来测量其他形式的线位移或角位移。
These two types of theories are not consistent due to the contradiction of dependence and independence of the rotation Angle.
这两种理论存在着转角的独立性与不独立性之间的矛盾，因而不相兼容。
Despite the rotation Angle does not affect the shape of the appearance, but will directly affect the input text point of view.
虽然有旋转角度并不影响形状外观，但会直接影响到输入文字的角度。
By changing the Angle of rotation of the disc can control the flow classification.
通过改变蝶板的旋转角度可以分级控制流量。
The expressions of the nonlinear optical rotation additional Angle in some special conditions are given.
给出了在特定条件下非线性旋光附加角的表达式。
That are the amplitude changes of rotation speed frequency, and initial phase angle.
并分析了影响其抑振效果的三个因素：转速变化幅值，频率以及初相角。
With the aid of the formula for the rotation of a vector and constraint equations for the connecting rod, the rotation Angle and the coordinates of path points of the connecting rod can be obtained.
应用矢量旋转公式及连杆运动约束方程，我们可以求得连杆转角及连杆曲线上点的坐标值。
The principle and method for quarto-rod can be analyzed as a device simply through rotation of the half Angle so as to find the central and circular points.
分析了采用半角转动法求中心点和圆周点以进行四杆机构综合的原理和方法。
Minimal film thickness and central film thickness of arc cylindrical worm drive were calculated under different rotation Angle.
计算了圆弧圆柱蜗杆传动在不同的蜗杆转角下的中心膜厚和最小膜厚。
The effect of transverse shear deformation is considered and Angle of rotation of surface normal for each layer is different.
这类板的横向剪切变形效应必须予以考虑，因而层板不同层的表面法线的转角是不同的。
It indicates that both the magnetization and Kerr rotation Angle depend on the thickness of layers, but are not simply proportional to the thickness of the layers.
这表明磁化强度和克尔角两者均依赖于多层摸的厚度，但不是简单的正比于厚度的关系。
Hysteresis loop of ferromagnetic materials are measured by using surface magneto-optic Kerr effect, and the Kerr rotation Angle is obtained.
用表面磁光克尔效应测量铁磁材料的磁滞回线，并求得在饱和状态下的克尔旋转角。
It is shown that, when the effect of warping on rotation Angle is neglected, tension (or compression) is only coupled with horizontal bending and vertical bending instead of constrained torsion.
所得到的刚度矩阵表明，只有当忽略翘曲变形对截面转角的影响时，轴向拉压才只与水平弯曲及竖向弯曲相耦合，而与约束扭转不再耦合。
This paper also discusses bit parameter design to improve the economy of PDC bits, such as negative rake Angle and side rotation Angle.
本文还介绍了为提高复合片钻头经济指标的钻头参数设计问题，如负前角，侧旋角等。
The EMG average amplitude was increased with the increase of the trunk rotation angle without significant difference (P>0.05).
随躯干旋转角度的增加，竖脊肌肌电幅度呈升高的趋势，但差异无统计学意义（P＞0．05）。
Geometrical relationship among the length of triangle sides is used to determine the Angle of rotation, the cone can be machined without using measuring instrument.
利用圆锥三角形边长的几何关系来确定转动角度，可以不用测量仪器加工出圆锥体。
Methods Traditional methods of direct suture were changed and new angle of lips was made by triangle rotation flap.
方法：改变两种传统方法直接缝合口角的方式，而以三角形返折瓣形成新口角；
The experiment results show that the diameter of seedling, speed of rotation and angle of slide cutting respectively influence the cutting resistance in sequence.
结果表明，苗木直径、转速、滑切角依次影响切削阻力大小，苗木直径与切削阻力呈平方关系；
Through the mechanical analysis, the differential equation for the longitudinal deformation of cold forming steel is derived, and the formula for longitudinal rotation Angle is obtained.
对冷弯型钢的纵向变形过程进行了力学分析，得到了变形微分方程，求得了转动角的理论公式，并对其变形形状进行了分析计。
The mathematical model of the relations between bending moment and the angle of rotation were also provided and the calculated results were compared with the FEM analysis results.
本文的计算方法可以很好的计算此类节点的初始转动刚度和塑性抗弯承载力； 本文的数学模型也可以很好的模拟此类节点的弯矩转角关系。
The variation of rotation Angle of director of classic nematic liquid crystals with field strength and position is calculated.
计算了典型向列相液晶的指向矢偏转角随场强和位置的变化。
The influences of plunge depth, push angle, profile of tool, rotation speed and welding speed on metal flowing were studied.
从压入量、倾角、搅拌工具的外形、焊接速度、旋转速度和材料所处位置等方面研究了工艺参数对金属塑性流动的影响。
The paper presents the graphic method of solution of the intersection of right elliptic cone with plane by rotation of auxiliary planes at a certain Angle.
提出一种将辅助平面旋转某个特定的角度图解正椭圆锥面截交线的方法。
The paper presents the graphic method of solution of the intersection of right elliptic cone with plane by rotation of auxiliary planes at a certain Angle.
提出一种将辅助平面旋转某个特定的角度图解正椭圆锥面截交线的方法。
应用推荐