In 2005, a postdoctoral researcher in his laboratory developed a water annealing process, reconstituting the silks slowly in a humid environment.
2005年，他实验室的一位博士后研究员利用一种水退火过程在潮湿环境下对丝类进行了缓慢的重组。
By warm rolling after hot rolling or cold rolling after annealing in process and stabilizing annealing in some temperature condition, the c.
采用热轧后温轧或中间退火后冷轧，再在一定温度下进行稳定化退火的工艺，可以获得综合性能良好的铝-镁-钪合金冷轧板材。
The temperature and thermal stresses are important parameters in the process of bell type annealing.
温度和热应力是罩式退火过程中的两个重要参数。
In the process known AS annealing, we heat the steel above the critical temperature and permit it to cool very slowly.
在通常所说的退火的热处理过程中，我们把钢加热到临界温度以上，再让它慢慢冷却。
It also proves that simulated annealing algorithms are feasible and practicable in optimization of mixed refrigerant LNG process.
证明模拟退火算法应用于混合制冷循环天然气流程的可行性和有效性。
Approach is done into the problems in process of annealing of raw material and semi-products and of quenching of finished products for manufacturing of card wires.
探讨了针布齿条热处理中原材料、半成品退火处理、成品的淬火处理的各种问题，同时提出了解决方法，以供同行参。
In the production process, hot metals chemical composition, heating and coiling temperatures and continuous annealing conditions while being rolled, will affect properties of tin-plates.
生产过程中，炼钢的化学成分、热轧的加热与卷取温度及连续退火的工艺条件都会对镀锡板的性能产生影响。
In addition, the annealing process of SiC films is mostly carried out in vacuum, argon gas or nitrogen gas ambience.
另外，对碳化硅薄膜的退火处理大多是在真空、空气、氩气或氮气气氛下进行。
The influence of salt medium, annealing temperature and the critical size of nanoparticles on growth process was analyzed in detail.
分析了纳米颗粒前驱体的大小、盐介质的选取、热处理温度等因素对纳米颗粒固相生长的影响。
Simulated annealing mechanism is introduced to do local-search for the best chromosome in every generation of the evolution process. This improves the convergence of the algorithm.
算法引入模拟退火机制，在遗传进化过程中的每一代，对最优个体进行邻域局部寻优，利用模拟退火进一步改善算法的收敛性能。
A mathematical model for heat transfer process in HPH furnace was established and verified, then applied to analysis of the relationship between gas flow rate and annealing time.
通过建立全氢罩式退火炉炉内传热过程的数学模型，并经过实测验证后，分析了循环风量与退火时间的关系。
In this article, a thorough investigation has been conducted into heating rate, holding time and cooling speed in an effort to work out an optimum ingot annealing process.
本文对铸件退火时如何控制加热速度、保温时间、冷却速度进行了充分的研究和探讨，为合理制定铸件退火工艺指出了方向。
In continuous annealing process, strip tension is an important factor that decides whether the continuous annealing line works steadily and promptly or not.
在带钢连续退火过程中，带钢张力的波动是造成带钢产品质量下降及制约连续退火机组高速运行的重要原因。
Wafer pairs with bonding interface being native oxide or thermal oxide have different bonding behavior in the annealing process, which were investigated and compared.
将硅本征氧化层与硅热氧化层两种键合界面在退火过程中的行为进行了理论分析与比较。
The formation process of SIMOX structure during low temperature annealing are also discussed in the paper.
本文还讨论了退火期间SIMOX结构的形成过程。
In the process of manufacturing Ni-Cr alloy filmresistances of IC by using magnetronic sputtering, the film resistive property has been found having a regular change after annealing process.
这一现象的发现对我们今后在集成电路镍铬合金薄膜电阻的设计优化方面具有较高的参考意义。
The process of annealing of cold rolled coil is carried out to obtain the desired properties in the finished coils.
卷线圈的寒冷的核酸混合的加工被实行在完成的线圈中获得被需要的性质。
Skin Rolling is the last process in the IF-steel produce. it's effect on the cost of steel-making , hot rolling, cold rolling and annealing.
平整作为IF钢生产的最后一道工序，其工序的优劣必将影响炼钢、热轧、冷轧及退火的成本；同时平整力过大将导致钢材质量下降，甚至出现废品。
Based on the characteristics of annealing furnace was studied, this system is fuzzy control in the application of annealing furnace combustion process.
基于退火炉的特点，本系统研究了模糊控制在退火炉燃烧过程中的运用。
The heat treating process was improved for the malleable cast iron, in accordance with its long annealing period, coarse graphite, residual carbide, lower mechanical properties and limited serve life.
针对可锻铸铁退火周期长、石墨粗大、碳化物消除不彻底、退火工件力学性能低和使用寿命短的问题，对它的退火工艺进行了改进。
Based on ternary model method, the mathematical model of strip steel annealing process in vertical furnace is built.
以三元模型法为基础，建立了带钢在立式炉内退火全过程的数学模型；
By using thermodynamic and kinetic theories, the mechanism that annealing in freeze-drying process of pharmaceuticals can change the structure of frozen pharmaceuticals was explained.
运用热力学和动力学理论分析了药品冷冻干燥过程中的退火操作改变冻结药品结构的机理。
In different coefficient of thermal conductivity, two kinds of finite element model were used to simulate and solve for the annealing process.
在不同导热系数条件下，采用两种有限元模型对退火过程进行模拟和求解。
ER110S, a kind of low-carbon steel welding wire alloy, which is processed by a traditional annealing, is often broken for the work-hardening in the follow-up drawing process.
传统工艺退火处理后的合金低碳钢焊丝ER110S，在后续的拉拔加工中，加工硬化导致经常断丝；
An improvement consider with water distribution system has been made in simulated annealing algorithm, reduce blindness in solving process, make the algorithm more efficient and competitive.
加之本文依据管网优化问题对算法进行了改进，降低了求解过程的盲目性，提高了该算法的时间效率，使得该算法更具优势。
After hot rolling, only through full recrystallizing by annealing process in the batch, can the stainless steel be put into use.
不锈钢经过热轧后，需经罩式炉退火工艺使材料充分再结晶后才能投入使用。
Finally, annealing process is carried out in the electroplated metal layer formed by the electroplating process through chemical vapor deposition method under promotion of ammonia plasma.
之后，利用氨气等离子体促进化学气相沉积法对上述经电镀制程而形成的电镀金属层进行退火处理。
It be used in disassembly sequence planning process which is a hybrid optimization algorithm, the particle swarm-simulated annealing optimization algorithm (PSO-SA).
本文将基于模拟退火的粒子群优化算法这一混合优化算法应用于拆卸序列规划求解问题。
It be used in disassembly sequence planning process which is a hybrid optimization algorithm, the particle swarm-simulated annealing optimization algorithm (PSO-SA).
本文将基于模拟退火的粒子群优化算法这一混合优化算法应用于拆卸序列规划求解问题。
应用推荐