The influences of cooling rate after the forge on the heating temperature and time of apheroidized annealing of steel T10 was studied.
研究了锻造后的冷却速度对T10钢等用球化退火加热温度和保温时间的影响。
Compared with traditional DFS algorithm and simulated annealing (SA) algorithm, the proposed algorithm possesses better convergency and high convergence rate.
该算法克服了DFS算法收敛性差和模拟退火(SA)算法收敛速度慢的缺点。
MPE technique shows remarkable advantages such as single precursor, wide choices of source materials, high deposition rate, and no subsequent annealing.
MPE制备薄膜技术采用单一先体溶液，源物质来源广泛，沉积速率快，不需后续热处理。
A mathematical model for heat transfer process in HPH furnace was established and verified, then applied to analysis of the relationship between gas flow rate and annealing time.
通过建立全氢罩式退火炉炉内传热过程的数学模型，并经过实测验证后，分析了循环风量与退火时间的关系。
The strip cooling rate with hydrogen and hydrogen plus water spray on continuous annealing line is estimated according to the heat transfer principle.
利用传热学原理估算了带钢连续退火生产中采用氢气和氢气加雾化水冷却介质的冷却速度。
The corelation of the annealing temperature with the total working rate of the cold-rolled product and the method of controlling the temperature in the mass production are particularly investigated.
着重探讨了在大生产条件下，退火温度与冷轧成品总加工率的相互关系与控制方法。
The methods to improve the intensity of cold-rolled sheets is to add some useful alloying elements during steel-making and improve the cooling rate annealing treatment.
提高冷轧薄板机械强度的方法主要是在炼钢时添加有益的合金元素及在热处理时提高退火后的冷却速率。
Through the study on mechanism of the effects of annealing treatment on etching rate, several laws are obtained, which show different annealing conditions have different effects on the etching rate.
在对退火处理影响腐蚀速率机制研究的基础上，得出了不同退火条件对腐蚀速率的影响规律。
By analyzing the wrinkles of the tooth-paste foil after final annealing, we found the really causes and adopt the correct preventive actions. And it improved recovery rate.
通过对牙膏管用铝箔成品退火后起棱的分析，找出其影响因素并采取了正确的预防措施，从而提高了成品率。
In this article, a thorough investigation has been conducted into heating rate, holding time and cooling speed in an effort to work out an optimum ingot annealing process.
本文对铸件退火时如何控制加热速度、保温时间、冷却速度进行了充分的研究和探讨，为合理制定铸件退火工艺指出了方向。
Adjusting the probability of acceptance could control the speed of chaos simulated annealing, and influence the rate of convergence.
接收概率衰减速度的调节可以控制混沌退火的速度，从而影响网络的收敛速度。
Company in early 2007 the focus of research induction annealing tinning machine, power-saving rate and old-fashioned electric wire annealing machine compared to up to 70%.
公司于2007年初重点攻关感应式退火镀锡机，节电率和老式电热丝退火机相比最高达70%。
The corelation of the annealing temperature with the total working rate of the cold-rolled product and the method of controlling the temperature in the mass production are particularly investig…
着重探讨了在大生产条件下，退火温度与冷轧成品总加工率的相互关系与控制方法。
The migration rate of new grains continuously decreased, many of them even stopped growing at a certain size and remained unchanged during long annealing time.
新晶粒的界面迁移速率在迁移过程中不断下降，以至最后几乎停止迁移。
The rate of fall-off of the interfacial residual stress with the rise of the annealing temperature is different in the two systems.
在两体系中，界面残余应力随温度升高而下降的速度不相同。
The best general working rate that Nb-1Zr wire was recrystallized completely was about 82% at a given annealing temperature.
试验结果表明，在一定的温度下，铌锆合金丝材达到完全再结晶的最佳总加工率在82%附近。
In this paper, the effect of annealing temperature and time on the rate of metal-induced lateral crystallization (m ILC) of amorphous silicon are investigated in detail.
详细研究了金属诱导非晶硅横向晶化时间、温度对晶化生长的影响。
In this paper, the effect of annealing temperature and time on the rate of metal-induced lateral crystallization (m ILC) of amorphous silicon are investigated in detail.
详细研究了金属诱导非晶硅横向晶化时间、温度对晶化生长的影响。
应用推荐