Effects of annealing treatment on physical properties of a dental all-ceramic system.
退火处理对牙科全瓷冠物性的影响。
The results indicate that annealing treatment can heighten breakdown voltage of SBD remarkably.
结果表明，退火处理可以显著提高器件反向击穿电压。
If the motor rotor is not carried out annealing treatment, motor's performance couldn't be influenced.
电机转子不进行退火处理，并不会影响电机的性能。
As a thermal oxidation procedure, the annealing treatment is not only a crystallization process but also an oxidation process.
作为一道热氧化工序，退火处理不仅是一个氧化过程，而且是一个结晶过程。
Machine structure frame precisely welded by CO2, high temperature annealing treatment to ensure normally to run without deforming.
机床采用精密CO2焊接，经高温退火消除应力，不变形。
The effect of different annealing treatment of the local softening process on the main driving gear of STR heavy-duty truck was investigated.
研究了不同退火工艺对STR重型汽车主动锥齿轮局部软化效果的影响。
And it was also found the annealing treatment and the heat recycling treatment could improve the damping capacity of magnesium matrix composite.
镁基复合材料的阻尼性能与其状态关系密切，退火处理和热循环处理提高了复合材料的阻尼性能。
The effect of the annealing treatment of the metal tailings architecture-glass-ceramic produced by one time sintering forging on cracks is researched.
目的研究退火制度对一次烧结法制取铁尾矿建筑微晶玻璃裂缝产生的影响。
The methods to improve the intensity of cold-rolled sheets is to add some useful alloying elements during steel-making and improve the cooling rate annealing treatment.
提高冷轧薄板机械强度的方法主要是在炼钢时添加有益的合金元素及在热处理时提高退火后的冷却速率。
The CCTO films prepared with different preheating temperature after rapid thermal annealing treatment have the smaller dielectric loss, and the values lie in between 0.1~0.35.
不同预烧温度所制备的CCTO薄膜，经快速热退火处理后，其介电损耗值较小，基本在0.1~0.35之间。
This type of transformer is fully enclosed structure, using annular iron core and the annealing treatment. The iron core, primary and secondary windings are casted with epoxy resin.
本型互感器为支柱式全封闭结构，采用环形铁芯并经退火处理，一、二次绕组及铁芯用环氧树脂浇注成型。
Resisting casting iron and have relieved the internal stress through aging annealing treatment to ensure the high precision and high rigidity to prolong the service life of the machine.
机体结构部分： 本机主要铸件均采用高级耐磨铸铁料，并经由时效退火处理，消除内应力，以确保高精度不变，高刚性，延长了机器使用寿命。
Maintenance methods: replace the rolex clutch wheel and small steel wheel or the wear gear after annealing treatment, repair the wear gear quenching of gears to the annealing treatment again.
维修方法：更换表离合轮和小钢轮或者把磨损齿轮经过退火处理，修复磨损齿轮再把退火的齿轮进行淬火处理。
Maintenance methods: replace the precision of the clutch wheel and the small steel wheel or wear the gear after annealing treatment, repair the wear gear and then annealing the gear quenching.
维修方法：更换精准表离合轮和小钢轮或者把磨损齿轮经过退火处理，修复磨损齿轮再把退火的齿轮进行淬火处理。
In addition, the deposited film needs no annealing treatment, so that the present invention has also the advantages of low cost, simple preparation, etc and is suitable for future application.
此外，沉积后的薄膜无需进行后退火处理，所以它还具有成本低，制备简单等优点，适用于未来的生产。
Through the study on mechanism of the effects of annealing treatment on etching rate, several laws are obtained, which show different annealing conditions have different effects on the etching rate.
在对退火处理影响腐蚀速率机制研究的基础上，得出了不同退火条件对腐蚀速率的影响规律。
The results show that, after laser surface processing, a melt layer with cellular-dendrite structure is formed, which could transform into very fine-grained structure during the annealing treatment.
结果表明，激光处理后试样表面熔凝区的组织主要为胞状枝晶组织，经后续热处理可转变为细小的等轴晶粒组织，并形成了良好的超塑连接条件。
The present paper discusses chemical compositions, structures and properties of explosion welded and rolled Ni stainless steel clad plate after annealing treatment under different process conditions.
讨论镍—不锈钢爆炸+轧制复合板在不同工艺下退火后的成分、组织和性能，在本试验的条件下，该复合板都有良好的结果。
The procedures of heat treatment of steel include hardening tempering annealing and case hardening.
钢的热处理工序包括硬化、回火、退火和表面硬化。
There are three main operations in the heat treatment of steel: hardening, tempering and annealing.
钢的热处理操作主要有三种，即：淬火，回火和退火。
There are three main operations in the heat treatment of steel: hardening tempering and annealing.
钢的热处理操作主要有三种，即：淬火、回火和退火。
The current simulated annealing method used for coordinated PSS parameter design is improved on the treatment of the bound constraints of arguments.
对现有采用模拟退火法协调设计多机p SS参数的方案提出改进，合理地处理了自变量取值约束。
Mainly for spare parts heat treatments and so on metal parts quenching, cyaniding, annealing and tempering USES, especially is suitable for the fastener, the standard letter heat treatment.
主要供备件金属零件淬火、氰化、退火和回火等热处理用，尤其适用于紧固件、标准件热处理。
Carbon steel bright heat treatment are mainly free-cutting steel and other low-carbon steel bright annealing, as well as bright demagnetization.
碳钢的光亮热处理主要有易切削钢等低碳钢的光亮退火处理以及光亮退磁。
This paper presents some results of heat treatment experiments of A508-3 steel at different quenching, tempering and annealing conditions.
本文介绍国产A508-3钢在不同的淬火、回火和退火条件下的热处理实验的某些结果。
Milling time and annealing heat treatment are the main influencing factors for changing powder structure and fining grain.
球磨时间和退火热处理是粉末金相组织变化和晶粒细化的主要影响因素；
Milling time and annealing heat treatment are the main influencing factors for changing powder structure and fining grain.
球磨时间和退火热处理是粉末金相组织变化和晶粒细化的主要影响因素；
应用推荐