The research progress in key materials of thin-film lithium battery in recent years was summarized in three aspects: cathode film, solid-state electrolyte film and anode film.
从阴极膜、固体电解质膜、阳极膜三个方面概述了近年来薄膜锂电池关键材料的研究进展。
Electroplating position: in a location in the plating liquid, and the relative position of the anode, can affect the film thickness distribution.
电镀位置：镀件在药水中位置，与阳极相对位置，会影响膜厚分布。
By hard anode oxidation, the film is obtained when industrial pure aluminum is in sulfuric acid solution, make the improvement in the traditional sulfuric acid hard anodizing craft foundation.
对工业纯铝在硫酸溶液中采用硬质阳极氧化的方法制取氧化膜的工艺进行了研究，在传统硫酸硬质阳极氧化工艺的基础上进行了改进。
By anode oxidation, thick film is obtained when aluminium is in sulphuric acid solution.
对铝在硫酸溶液中采用阳极氧化的方法制取厚氧化膜的工艺进行了研究。
As bottom layer, Ta film can prolong the life of lead dioxide anode more than 40 times.
钽膜作为底层可提高二氧化铅阳极的使用寿命40倍以上。
With anodic electrodeposition, metallic ions from the part being coated often become included in the deposited film. This condition results from anode reactions when current is applied.
材用阳极电泳时，由于通电时的阳极反应从被涂工件上溶下的金属离子常常包含在漆膜中，。
All renascent oxygen is consumed for oxidizing metal anode to form metal oxide film.
当形成足够厚的氧化膜后，阳极的氧化速度减慢，阳极表面才析出氧气。
The analysis and calculation on some structure parameters of the sensor have been done, such as the dimension of pressure sensitive film, the space length between anode and cathode and so on.
对传感器的压力敏感膜尺寸、阴阳极间距等结构参数进行了分析计算；
Metallic antimony thin film was deposited by magnetron sputtering and it was investigated as anode materials for lithium-ion batteries.
采用磁控溅射方法制备金属锑薄膜，并把它作为锂离子二次电池负极进行研究。
Polymer film formed on the metal surface obstructed both cathodic and anode reactions. This made its corrosion inhibiting efficiency attain to 99%.
在金属表面形成的聚合物膜阻滞了阴、阳极反应，其缓蚀率达99%。
In view of the importance of anode oxide film in ta electrolytic capacitor, comparative analysis is made of the influence of oxygen content in ta anode sheet. Related influence mechanism is described.
针对阳极氧化膜在钽电解电容器中所起的重要作用，对比分析了钽阳极块中氧含量对其形成及电性能的影响，并简述了有关影响机理。
Molding pressure, Sinter temperature in advance and the velocity of temperature raised are the main factors for the matching of anode substrate and thin film YSZ electrolyte.
影响阳极基底与YSZ电解质薄膜共焙烧匹配性的主要因素是成型压力、预焙烧温度和焙烧升温速率。
Molding pressure, sinter temperature in advance and the raise velocity of temperature were the main influencing factors for the matching of anode substrate and thin film YSZ electrolyte.
影响阳极基底与YS Z电解质薄膜共焙烧匹配性的主要因素是成型压力、预焙烧温度和焙烧升温速率。
The anode oxide film has a very strong effect on the performances of aluminium electrolytic capacitor.
阳极氧化膜是电解电容器的工作介质，其质量的优劣直接影响着铝电解电容器的性能。
The structure of two layer films for the anode sensing film of the field emission pressure sensors is presented.
提出了场发射压力传感器阳极变形膜的双层膜结构。
With the decrease of film thickness, the cathodic polarization current density of 7B04 Al-alloy increases, and the anode reaction is suppressed.
液膜厚度减小，7B04铝合金阴极极化电流密度增加，阳极反应受到抑制；
The thin film electrode of the invention is prepared at a room temperature thus greatly saving energy resources which can be used as the photo-anode of flexible solar cell.
本发明制备的薄膜电极是在室温条件下制备的，大大地节约能源，该薄膜电极可用于柔性太阳能电池的光阳极。
The thin film electrode of the invention is prepared at a room temperature thus greatly saving energy resources which can be used as the photo-anode of flexible solar cell.
本发明制备的薄膜电极是在室温条件下制备的，大大地节约能源，该薄膜电极可用于柔性太阳能电池的光阳极。
应用推荐