Nano-metal nickel powder was prepared by plasma arc spraying method.
利用等离子体法制备金属纳米镍粉。
Aluminum coating on AZ91 magnesium alloy was deposited by arc spraying.
采用电弧喷涂技术在镁合金az91基材表面制备铝涂层。
A new technology-the electric arc spraying technology combined by powder is introduced.
介绍一种新型电弧喷涂技术粉末复合电弧喷涂技术。
The supersonic velocity electric arc spraying technology (HVAS) has gained satisfactory solution.
电弧超音速喷涂技术(HVAS)可以有效的解决此问题。
The high-power two-time atomization electric arc spraying equipment and techniques are presented.
介绍大功率二次雾化电弧喷涂设备和技术。
A protecting aluminum coating on the magnesium alloy surface was obtained by electro-arc spraying.
本文叙述了表面技术——电弧热喷涂技术在材料防腐上的应用。
Arc spraying rapid tooling manufacturing technique based on RP is a new technology of mould making.
基于RP原型的电弧喷涂快速模具制造工艺是一项模具制造新技术。
Atomization is very important in arc spraying, as the coating quality depends greatly on atomization.
雾化在电弧喷涂中具有重要的作用，涂层质量很大程度上取决于雾化效果。
Arc spraying of other parameters by the spraying equipment and spraying decide the properties of materials.
电弧喷涂的其他规范参数由喷涂设备和喷涂材料的特性决定。
As a new method to improve the quality of arc spraying, arc ultrasonic is introduced into the field of spraying.
提出用电弧超声方法作为改善喷涂涂层质量的新方法。
Surface roughening is very important in arc spraying, as the coating quality depends greatly on its treatment result.
表面粗化在电弧喷涂中具有重要作用，涂层质量很大程度上取决于表面粗化预处理的效果。
An equipment for rapid die manufacture with the combination of electric arc spraying and brush plating was introduced.
并介绍了电弧喷涂和电刷镀一体化快速模具制造设备。
The arc spraying technology was compared with the other thermal spraying technologies in the ways of coating performance and so on.
将电弧喷涂与其他热喷涂技术在涂层性能等方面做了对比。
Different technological parameters of electric-arc spraying aluminum and zinc on the surface of magnesium alloy samples were selected.
选择不同的喷涂工艺参数，在镁合金表面喷涂铝锌丝材。
It is also proved to be the ideal power source for arc spraying process according to the experimental analysis of the dynamic behavior in arc.
对逆变方波交流电弧喷涂过程中电弧区的动态行为进行了一定试验分析，得出逆变方波交流电源是理想的电弧喷涂电源。
It was proved that high velocity arc spraying Ni-Al coating is one of best intermediate coatings with high adhesive strength and fine structure.
高速电弧喷涂镍铝涂层结合强度高，涂层组织致密，是优良的打底涂层。
High velocity arc spraying is one of the high tech processes in thermal spray devices where the high velocity arc spraying gun is the key equipment.
高速电弧喷涂技术是热喷涂技术中的高新技术，高速电弧喷涂枪是实现高速电弧喷涂的关键装置。
The bed test of diesel engine indicated that the optimized dry blasting steel grit and arc spraying technology was feasible to repairing crankshaft.
发动机台架试验结果表明，优化干喷钢砂电喷涂工艺规范用于修复曲轴是可行的。
The manufacturing process of foaming mould of an oil pump body by using LOM prototype, electroforming and wire-arc spraying was introduced in detail.
以制造泵体发泡模具为例，详细介绍了在LOM原型的基础上，通过LOM原型的预处理、电铸和电弧喷涂等工艺手段快速制造发泡模具的过程。
In this paper, basic principles and technical process of arc spraying are introduced. The main application and current development are also discussed.
介绍了电弧喷涂技术的原理和工艺过程，论述了该技术的主要应用和研究进展。
The effects of parameters changes of electric arc spraying technology on coating structure and anti-buckling performance were discussed in this paper.
探讨电弧喷涂工艺参数变化对涂层组织、抗折弯性能的影响。
This set of equipment by the arc gun, arc spraying of power supply. Take another corollary equipment: air compressor, air cleaner, put silk plate frame.
本套设备由高速电弧喷枪、电弧喷涂电源组成。另需配套设备：空气压缩机、空气滤清器、放丝盘架。
A rapid manufacturing process for sheet metal stamping with RP and arc spraying metal (AMS) as its key technologies, namely RP-AMS process, is developed.
提出并实现了以快速原型(RP)技术和电弧喷涂技术(ams)为核心的板料成形模具快速制造新工艺。
The major results are summarized as follows: the amorphous coatings were prepared by arc spraying technology, the highest amorphous content attainable 65.
主要研究结果如下：采用电弧喷涂方法制备非晶涂层，涂层中非晶含量最高可达65。
The major results are summarized as follows: the amorphous coatings were prepared by arc spraying technology, the highest amorphous content attainable 65.3%.
主要研究结果如下：采用电弧喷涂方法制备非晶涂层，涂层中非晶含量最高可达65.3%。
The microhardness of JCW-S-AM coatings prepared by high velocity electric arc spraying on conditions of different process parameters was tested by hardometer.
采用超音速电弧喷涂设备在不同工艺参数条件下制备JCW - S - AM涂层，利用显微硬度计测定各种涂层的显微硬度。
The influence of arc spraying parameters on the adhesive strength and wear-resistance of JCW-B coating was studied by orthogonal design test and extreme analysis.
采用正交设计方法和通过极差分析研究了电弧喷涂工艺参数对J CW - b涂层结合强度和耐磨性的影响。
The result suggests that the coating of Al-based cored wire prepared by arc spraying has excellent high-temperature oxidation resistance and corrosion resistance.
研究结果表明：电弧喷涂铝基粉芯丝材制备的涂层具有优良的抗高温氧化和耐腐蚀性能。
Aluminum coatings were sprayed onto the substrate of steel Q235 by arc spraying method and the processing parameters were optimized by orthogonal experimental design.
采用电弧喷涂方法在Q 235钢基体上喷涂铝涂层，并用正交设计的方法对工艺参数进行了优化。
Aluminum coatings were sprayed onto the substrate of steel Q235 by arc spraying method and the processing parameters were optimized by orthogonal experimental design.
采用电弧喷涂方法在Q 235钢基体上喷涂铝涂层，并用正交设计的方法对工艺参数进行了优化。
应用推荐