This error indicates that your development machine and target machine do not have the same baud rate.
错误。该错误表示您的开发计算机和目标计算机具有不同的波特率。
The baud rate for the interface is 31.25 Kbaud with 1 start bit, 8 data bits, and 1 stop bit, giving a period of 320 microseconds per serialized byte.
接口的波特率为31.25 k波特，其中包括1个起始位，8个数据位以及1个停止位，每个串行比特周期为320微妙。
If the debug session is conducted remotely, the CDT initiates communication by sending a remotebaud command to GDB, followed by the baud rate.
如果远程执行调试会话，CDT通过向gdb发送remotebaud命令(后跟波特率)发起通信。
In the case of the UART, there's not a lot to configure apart from the baud rate and framing details.
对于UART来说，除了波特率和帧细节外没有太多属性要配置。
Enter no autobaud-- Fixes the baud rate.
输入no autobaud ——选定波特率。
The resulting transfer rate is 110 baud.
最终的传输速率是110波特。
Standard 485 communication interface, built-in decoder board (pre-digital decoders optional) to support a variety of mainstream protocol, baud rate adjustable.
标准485通讯接口，内置解码板(预置位解码板选配)支持多种主流协议，波特率可调。
You need to use computer software debugging port. 9600 baud rate.
需用电脑串口软件调试。波特率9600。
There are constraints on the CPU clock speed related to the baud rate.
波特率会对CPU时钟速度产生限制。
Baud rate match is the bottleneck of realization of high speed data exchange between many instrument and computers.
波特率匹配问题已成为许多设备和微机之间实现快速数据交换的瓶颈。
The error of baud rate setting is a very important parameter in serial communication.
波特率设置的误差是串行通讯中一个非常重要的参数。
The program also shows the current baud rate to let users know the speed and quality of their connection.
该计划还表明，目前的波特率，以让用户知道的速度和质量，他们的连接。
CAN protocol provide the baud rate, the cycle of sampling points and the location of the programmable.
CAN通信中，CAN协议提供波特率、位周期内取样点数和位置的编程设置。
In this method, the data style and baud rate can be selected by software, which is quit easy.
在这种方法中，数据的格式、波特率的选择都是通过软件来实现，应用十分方便。
Class using the specified port name baud rate parity bit data bits and stop bit.
使用指定的端口名称、波特率、奇偶校验位、数据位和停止位初始化。
Send and receive news : you can set ports, baud rate , parity and other parameters.
通过设置发送并接收消息：可以设置端口，波特率，奇偶校验等参数。
The GPRS has the baud rate high, on-line forever, overlay the region wide etc. advantage which is suitable to collect some data of region dispersion very much.
GPRS具有传输速率高、永远在线、覆盖地域广等优点，非常适合采集点地域分散的数据采集。
When the right coding mode is chosen, baud rate should be set more than digital signals transmission velocity, and the speech communication quality can be guaranteed.
在正确选择编码方式后，波特率设置为大于数字信号传输速率，可保证语音通信质量。
The communication of can firstly needs both sides to match the BUS baud rate, so that serial data can be transmitted and received on can BUS.
CAN通信首先需要双方匹配总线波特率，这样就可以在CAN总线上发送和接收串行数据。
What baud rate, or range of baud rates, is supported.
是否支持波特率或波特率的范围？
Micro-controller AT89C51 of the system which works in the serial ways can control the Baud rate that the data receiving and dispatching, and receiving and dispatching the data by way of interruption.
系统中数据的接收和发送工作在串行方式下，AT89C51可以控制数据收发的波特率，以及以中断方式控制数据的发送与接收。
Through the application of CAN bus in digital Control Logging system, the paper describes the hardware composition, introduces the calculation of baud rate and Software initialization.
文章通过CAN总线在数控测井仪中的应用过程，给出了CAN总线的硬件连接，波特率计算，软件初始化及报文信息的收发初始化，介绍了CAN总线的使用方法。
In this method, the data style and baud rate are selected by software, and the application is quite easy.
在这种方法中，数据的格式、波特率的选择都是通过软件来实现的，应用十分方便。
This paper analyzes errors of Baud rate in the serial communication, then expounds the corresponding methods to reduce the errors according to their different sources;
对串行通信中出现的波特率误差进行了详尽分析，针对其不同来源，提出了误差减小的相应措施；
This modulation rate of data transmission is expressed as 12,800 baud (Bd), representing 12,800 bits per second.
这种数据传输调制频率用12800波特(Bd)来表示，指的是每秒钟12800位。
Finally, the thesis proposes several newly adaptive technologies, like the estimation of baud rate and SNR. And corresponding improvements are also discussed.
最后，论文提出了一些新的自适应技术，如波特率估计、信噪比估计等，并给出了应用这些技术的自适应调制解调器的改进方案。
This capacitance restricts the baud rate.
这电容限制波特率。
Why does the delay between bytes increase when I increase UART baud rate?
为什么在字节延迟会增加当我增加波特率？
Firstly, the error source of baud rate and the allowable baud rate error are analyzed with the example of MCS-51. Then a method of baud rate autoregulation is presented.
首先以MCS - 51为例，分析了波特率的误差源和允许的波特率误差，然后介绍了一种自动调整波特率的方法。
Firstly, the error source of baud rate and the allowable baud rate error are analyzed with the example of MCS-51. Then a method of baud rate autoregulation is presented.
首先以MCS - 51为例，分析了波特率的误差源和允许的波特率误差，然后介绍了一种自动调整波特率的方法。
应用推荐