This seems more advantageous in replacing the bearing and mechanical seal of high-powered pumps.
这一优点对更换大功率泵的轴承和机械密封等易损件尤为明显。
Impeller balance : impeller meets the criterion ofISO1940-2000, G6.3-level to calibration balance, little vibration, greatly improve the life of bearing and mechanical seal.
叶轮平衡:叶轮按ISO1940-2000,G6.3 级校准平衡,运行时振动小,大大提高了轴承和机封的使用寿命。
In addition to controlling mechanical shaft and bearing loads, the coupling further protects the encoder by providing a high degree of electrical and thermal isolation between coupled shafts.
除了控制的机械轴和轴承载荷,耦合进一步保护通过提供电力和热轴之间的耦合隔离高度编码器。
Linear motion bearing interchangeability, easy to install saving time, and to the mechanical structure is novel, small, amount of light of the characteristics.
直线运动轴承互换性好,安装使用方便省时,并使机械结构新颖,小型,量轻之特点。
V-valve dual-bearing structure, mechanical stability, high starting torque is small, to ensure the valve sensor with excellent sensitivity and speed.
型阀采用双轴承结构,机械稳定性高,启动扭矩小,保证了阀门具有极好的灵敏度和感应速度。
Generally applies to capsize under tremendous torque and rotational movement relative to the mechanical equipment, is a kind of efficient, high load-bearing capacity bearings.
一般适用于承受巨大倾覆力矩并作相对旋转运动的机械设备,是一种具有高效、高承载能力的组合轴承。
Allografts are readily available, easily stored, can be machined into myriad shapes, create no donor site morbidity, and are capable of bearing mechanical loads.
同种异体同可以很容易的得到,储存方便,可以制成各种形状,不会造成供区的病态,且能起到机械支撑作用。
This dynamometer using permanent magnetic eddy load, without any contact, can avoid the velocity limit of mechanical bearing and coupling.
此测功机采用非接触式加载——永磁涡流加载,可以避免机械轴承和联轴器的速度极限的限制。
Applying the slender crankshaft, the level rolling bearing technology, and lower viscosity refrigeration oil, increased the mechanical efficiency.
采用细曲轴及平面滚动轴承技术及较低粘度的冷冻油以提高机械效率。
The foregoing provides a basis for the selection of oil-film force model during the nonlinear dynamic analysis and design of an actual rotating mechanical rotor-elliptic bearing system.
研究结果为在实际旋转机械转子-椭圆轴承系统进行非线性动力学分析和设计时,选择油膜力模型提供了依据。
The magnetic bearing is a novel type, high performance bearing, which suspend the rotor by magnetic force without any mechanical contact between rotor and stator.
磁悬浮轴承是一种利用磁场力将转子悬浮于空中,使转子与定子之间实现无机械接触的一种新型高性能轴承。
For thrust bearings, and shaft tight and together with the movement of said shaft washer, and bearing or mechanical shell holes into the transition and play supporting role with the said seat.
对于推力轴承,与轴紧配合并一起运动的称轴圈,与轴承座或机械壳体孔成过渡配合并起支承作用的称座圈。
Oil fluid analysis technic acquires remarkable effect and obtains a lot of application in mechanical equipment's state monitoring such as engine, gear transmission, bearing system, hydraumatic system.
油液分析技术在柴油机、齿轮传动、轴承系统、液压系统等机械设备的状态检测方面,取得了显著的效果,获得了广泛的应用。
Magnetic bearing has no mechanical contact between the rotor and stator, and a rotary pump with magnetic bearing has therefore no mechanical wear and thrombosis.
旋转血泵磁浮轴承的定子和转子之间没有机械接触,所以其内部不会发生机械磨损或产生血栓。
Mechanical concept is based on a double ball bearing design, and is available as a solid-shaft or hollow-shaft version in common shaft diameters.
机械概念是基于双滚珠轴承设计,并作为固体轴或空心轴直径共同轴版本。
Mechanical components which are easily eroded, and the load bearing requirements of the higher use of the environment under ideal choice.
是那些机械部件轻易腐蚀,而且轴承负荷要求较高的使用环境下的理想选择。
"Incorporates the same "construction features"as the Series 9100 for bearing design, shaft strength, mechanical seal system and cap/cable system"
轴承设计,轴长,机械密封系统和外罩/电缆系统等部件于9100系列泵完全相同。
In this paper, we built the contact mechanics model in view of the rolling bearing characteristics, made analysis on the mechanical characteristics and to draw general conclusions.
本文针对滚动轴承的几何结构特点,建立起其接触力学模型,对它的力学特性进行分析并得出一般性结论。
The surface characteristic of the raceway of bearing after electrochemical mechanical machining(ECMM) is measured and analyzed.
研究了电化学机械加工轴承滚道的表面特性,并同传统超精加工进行了系统的分析比较。
By solving the mechanical model, the casing bearing forces can be obtained under the conditions of different hole types, mud density, casing suspension length and casing running ways.
通过对模型的求解,可以得到不同井眼类型、泥浆密度、悬浮长度以及不同下套管方案下的套管受力,为大位移井下套管作业提供了力学参考。
Usage: use motor iron core, bearing pressing, punching stretch and mechanical pressing etc.
用途:本机适用电机铁芯、轴承压装、冲压拉伸以及机械压装等。
Taking Xuechun mine for instance, KHT cushioning damping synchronous decking plate swing deck used in the mine is analyzed, and establishes mechanical model of bearing.
以薛村矿为实例,分析了KHT型缓冲阻尼同步摇台应用于该矿副井的情况,并且建立了托爪承接力学模型。
Mechanical characteristics of permanent magnet bearings is expressed by bearing capacity and bearing stiffness.
永磁轴承是利用永磁材料产生的磁场力将转轴悬浮起来工作的一类磁力轴承。
The effects of different structural parameters, such as contact Angle, deformation and stiffness and load parameters on bearing mechanical properties were studied.
研究了不同结构参数和载荷参数对滚珠轴承力学特性的影响,得到了滚珠轴承接触角、变形以及接触刚度的变化规律。
Sales are all mechanical transmission industry UMA bearing international brands, and the Chinese mainland to seek joining agent.
现全线销售机械传动行业国际化品牌UMA轴承,面向中国大陆地区,征询加盟代理。
Effect of technological parameters of controlled rolling and accelerated cooling on the mechanical properties of vanadium bearing microalloyed clean steel have been investigated in this paper.
讨论了在控制轧制和加速冷却条件下,含钒微合金较洁净钢的工艺参数对力学性能的影响。
Tectonic group patterns of coal seam depended on tectonic stress field, mechanical properties of rock of coal-bearing formation and surrounding environments.
煤层的构造组合型式在很大程度上取决于构造应力作用、含煤地层的岩石力学性质和应变环境等。
Treatment of materials properties selection, mechanical characterization, and processing in design of load-bearing and environment-compatible structures are covered.
涵盖材料特性、机械性质、大量生产过程的设计和环境整合的论述。
Treatment of materials properties selection, mechanical characterization, and processing in design of load-bearing and environment-compatible structures are covered.
涵盖材料特性、机械性质、大量生产过程的设计和环境整合的论述。
应用推荐