A 30% bending load would decrease service life of concrete by 40%.
施加30%弯曲荷载将使混凝土寿命降低40%。
Can a bending load makes both compressive and tensile stress in a member?
弯曲载荷可以对一个物件同时产生压缩应力和张应力么？
Torsional and bending load spectra of drive shaft are worked out and fatigue life of the shaft estimated.
编制出驱动轮轴扭转与弯曲载荷谱，并对驱动轮轴的随机疲劳寿命进行了估算。
The counter deflection structure is a new-proposed steel structure especially suitable for that mainly subjected to bending load.
反挠结构是一种新近提出的钢结构，它特别适用于主要承受弯矩荷载的结构。
Effects of temperature on impact strength of PVC and the effects od load rate on mechanical properties under tension and bending load of PVC are Studied.
本文研究了加载速率对PVC拉仲、弯曲性能的影响规律及试验温度对PVC冲击强度的影响。
The shrink-fit components usually suffer fretting damage in the contact surface under rotating bending load, which remarkably reduce the life of the components.
过盈连接部件在旋转弯曲载荷下，易于在接触区域产生微动损伤，降低构件的使用寿命。
Research results provided theoretical evidence for the pallet's bending load experiment and design, it had practical directive significance for optimizing pallet materials, design and its evaluation.
研究成果将为托盘弯曲承载分析和设计提供理论依据，并为优化托盘用料和结构、合理实施试验评估均具有较好的实际指导意义。
They saw that all the trees were bending under a heavy load of apples, except one tree on which there were no apples at all.
他们走进一个果园，看到所有的树都被累累的苹果压弯了腰，只有一棵树上一个苹果也没有。
The law shows that, along with the static pre-load increasing, the dynamical bending strength of concrete would go up to a peak value and then move downward to the static strength.
计算结果显示，不同细观骨料模型具有相似的规律，即随预静载增大，混凝土动弯拉强度上升，至一定峰值后回归到静载强度。
This makes the bolt bear the preload and work load, but also bear the role of additional bending moment.
这使螺栓在承受预紧力和工作载荷作用的同时，还要承受附加弯矩的作用。
In a leader, installed in the upper crossbeam gabion stone kg, plus kg load under the action of external load, while the central beam bending deformation, but the wire cage has not broken beam.
在一组长，内装公斤块石的铅丝笼横梁上部，加上公斤的荷重，在外荷作用下，梁的中部虽然发生弯曲变形，但铅丝笼梁却始终未断裂破坏。
Based on the theory of the bending of non-prismatic beam, the paper has derived a rigidity matrix and the equivalent node load of the rigid-frame element with variable sections.
本文从非棱柱形梁的弯曲理论出发，推导出了变截面刚架元的单元刚度矩阵和等效结点载荷。
The effects of the connectors on the critical buckling load and the bending stress of pipes in horizontal section are analyzed.
分析了钻杆接头对水平井段钻柱屈曲临界力和弯曲应力的影响，提出了计算钻柱正弦屈曲临界力的新方法。
The problem of bending of rectangular plates with rest-on edges under the combined action of concentrated load with uniform distribution load has been discussed.
本文讨论在集中荷载和均布荷载联合作用下搁支矩形板的弯曲问题。
Under shock load conditions the peak load can exceed the ultimate bending strength of the core material and fracture occurs, usually at the most highly stressed cross section area.
在冲击负荷下，最大负荷超过了轧辊芯部材料所能承受的最大抗弯曲负荷，发生截面断裂。断裂一般产生于负荷应力为最大的截面。
The type of load cell that is being presented is basically similar to a bending beam type.
该类型的称重传感器是正提交基本上是类似的弯曲梁式。
This paper primarily represents the study and discussion about computing methods and modeling of load share of contact stress and bending stress of static mesh and dynamic mesh of DCAHG.
本文主要对双圆弧齿轮传动的载荷分配、静念啮合和动念啮合的接触及弯曲应力的分析模型和计算方法做了研究和探讨。
The results show that the mean load transfer ratios between human and rhesus monkey elbow joints were 3.65 and 4.28 for torsional and bending injury respectively.
实验结果表明：人体和猕猴肘关节在发生扭转和弯曲损伤时所承受的平均载荷传递比分别为3．65和4．28。
The text introduces performance of bending components, shear properties, as well as in the use of performance under load, and dynamic performance.
介绍了受腐蚀钢筋混凝土受弯构件的性能、抗剪性能、以及在使用荷载作用下的性能和动力性能。
This paper presents the structural features and characteristics of the radial impact tester, torsional fatigue tester, rotary bending tester and radial load tester used for the tests.
本文介绍了用于该试验的径向冲击试验机、扭转疲劳试验机、旋转弯曲疲劳试验机和径向载荷疲劳试验机的结构形式及性能特点。
This paper solves problems of geometrically nonlinear bending of very flat and thin orthotropic shell under transverse load with least square method of collocation.
本文用最小二乘配置法求解正交异性极扁薄壳承受横向载荷作用下几何非线性弯曲问题。
A thorough study has been made in respect of dividing of space finite elements, treatment of boundary conditions and equivalent nodal load of bending and reverse loads, etc.
在空间网块的划分、边界条件的处理、弯曲与扭转载荷的等效结点载荷的处理等方面，做了深入细致的探讨。
With this situation, any amount of axial load can be applied to compressive bar of arbitrary length without bending.
在此状态下可在任意长度的压杆上，加任意大小的轴向载荷，而不产生弯曲。
With the horizontal load, the lateral displacement curve of the structure is divided to shearing type and bending type .
在水平荷载作用下，建筑结构的侧移曲线分为剪切型和弯曲型两种。
The authors used the method of trigonometric series and polynomial to solve the problem for the bending of a cantilever plate in a symmetric triangular shape under uniform load.
作者以前应用三角级数加多项式的方法解决了悬臂对称三角形板在均布载荷作用下的弯曲问题。
The lower balance force with balance factor 0.89 is adapted to reduce bending of universal coupling shaft and load of copper slider.
提出接轴平衡力应该采用欠平衡，平衡系数取0.89，这样既可以降低接轴承受的弯矩，又可以降低接轴虎口铜滑块的载荷。
The microstructure examined by SEM and TEM indicates that the increase in bending strength is found to be dependent on the load shift from matrix to the whisker.
用SEM和TEM观察了材料的显微结构，指出弯曲强度增加是由于荷载从基体转移到晶须。
CAI's new steering actuator design eliminates side load bending of guide rod, bending of potentiometer shaft and potentiometer exposure to harsh environmental conditions.
CAI的新型操纵制动器设计消减了划杆的边缘荷载弯曲以及在恶劣环境下分压计轴和分压计的弯曲。
Results Obtained the distortion deformation, stress nephogram, section stress of femur neck and upside of femoral shaft of the femur under the bending moment and compressive load.
结果得出了在弯压复合荷载下股骨的变形、应力云图、股骨颈和股骨干上端的截面应力。
Result When the whole thickness of the samples were determined, the fracture load, bending strength and elastic modulus were increasing according the increase of the metal thickness.
在总厚度不变时，破坏载荷，弯曲强度及弹性模量都随金属厚度增加而增加。
应用推荐