Designed specifically for briquetting coal and charcoal at high production rates.
特别为煤炭和木炭设计，生产率高。
The briquetting technology was simplified because of no needing of thermal dry process.
型煤制备工艺简化，不需要烘干工序。
This paper analyses the process of coal hot briquetting and points out the way to improve squeeer.
对煤料的热压成型过程进行了分析，提出了改进挤压设备的途径。
The spring presses through the briquetting the rack depending in the gear, guarantees ceaseless meshing.
弹簧通过压块将齿条压靠在齿轮上，保证无间隙啮合。
The pressure bar of a lead briquetting machine, imported from German, was seriously scratched during its service.
从德国进口的压铅机压杆在使用中表面严重划伤。
The metamorphic degree of coal, the binder and the briquetting conditions that affect the acting forces were also studied.
探讨了煤的变质程度、粘结剂和成型条件对颗粒间作用力的影响。
Making biomass briquetting is a quite complicated process. It is influenced by many factors including temperature and stress.
将生物质压缩成型，是一个相当复杂的过程，除了受到压力、温度的影响之外，还受到多种因素影响。
The determined technological process is applied to the continuous briquetting test with the agglomeration ratio reaching 86.5%.
采用这一工艺过程进行连续成型试验，成球系数达到86.5%。
The paper puts forward a refernce for running of the fine-coal briquetting equipment to promote briquette industry development.
为搅拌设备的研制与性能评价，为型煤工艺的运行与生产提供参考。
The results show that the performance of coal briquetting machine and quality of briquette are enhanced with the new construction.
新的结构提高了型煤机的技术性能和型煤质量，同时降低了设备制造成本和动力消耗。
Annual production capacity of 60000 tons of biomass fuel, biomass briquetting machine equipment, the annual production capacity of 200 sets.
生物质燃料年生产能力6万吨，生物质成型机设备年生产能力200套。
Through comprehensive analysis and discussion, the process of briquetting-smelting by closed-top blast furnace for copper smelting is selected.
通过综合分析与论证，选择了压团—炼铜密闭鼓风炉熔炼工艺。
Briefly expound the significance of fine coal briquetting in using coal resources, and introduce the concept, task and process classification of it.
本文对粉煤成型在充分利用煤炭资源方面的意义做了概括性的阐述，对粉煤成型的概念、任务及工艺分类等方面也做了简要的介绍。
Clean coal Technologies of high sulfur coal (CCHS) include: screening, washing, coal blending, furnace-front briquetting and capturing sulfur in furnace.
高硫煤的洁净(CCHS)技术包括筛分、洗选、配制、炉前成型和炉内固硫等。
The effect of feed coal particle size on strength of briquette is discussed when different briquetting process and rank of coalification coal are adopted.
阐述了采用不同成型工艺和使用不同变质程度煤成型时，原料煤粒度对型煤强度的影响。
In applying hot briquetting for ISP dross processing, influences of pressure, temperature, time of pressing on strength of hot briquetes have been examined.
在用ISP法冶炼浮渣热压团时，研究了压团压力、温度、加压时间对铅锌密闭鼓风炉冶炼浮渣热压团块强度的影响。
Straw and stalk biomass whose density is lower belongs to compressible material. Press briquetting is the key that improves the capability of biomass production.
秸秆类生物质属于可压缩材料，其密度较低，致密化是提高生物质制品性能的关键。
Analyses are made for the influence factors of moulding characteristics such as coal type, size, distribution water content, moulding pressure and briquetting rate.
分析了影响成型特性的因素，如煤种、粒度、水分、成型压力和成型率等。
In addition, the effect of pre grinding on the briquetting process as well as on the strength of briquettes was investigated and a positive conclusion was obtained.
此外，还就预先碾压对于成型过程的影响进行了研究，并得到了肯定的结论。
The hydraulic jack besides USES in the forging and stamping forming, may also use in rectifying, the press mounting, the pack, the briquetting and the clamp and so on.
液压千斤顶除用于锻压成形外，也可用于矫正、压装、打包、压块和压板等。
In this study, the effects of hot briquetting process parameters on cold strength of the CCB, and the mechanism of the CCB high strength are investigated and discussed.
本研究重点考察了煤种及热压工艺参数对热压含碳球团冷态强度的影响，并探讨了热压含碳球团获得高强度的机理。
In this study, the effects of hot briquetting process parameters on cold strength of the CCB, and the mechanism of the CCB high strength are investigated and discussed.
重点考察了煤种及热压工艺参数对热压含碳球团冷态强度的影响，并探讨了热压含碳球团获得高强度的机理。
The key points of the process flow, main equipment and operation for fine lime briquetting production line of Nanjing Iron and Steel Integrated Corporation are described.
介绍了南钢石灰粉料压球生产线的工艺流程、主要设备和操作要点。
The paper describes the raw material, equipment, flowsheet and method of the briquetting test of sponge iron powder. Suitable parameters were obtained through the research.
叙述了海锦铁粉压块成型试验的原料、设备、流程、试验方法及结果。
Presented is an orthogonal experiment for optimization study on the composition of compound binder and main briquetting technics parameters of briquette used for metallurgy furnace.
以湖南金竹山无烟煤为原料，采用正交实验法对冶金炉窑用型煤复合黏结剂各组分的配比及型煤成型的主要工艺参数进行了实验研究。
This paper introduced the development of briquette production line, including the technical process and the main equipment. The roll type briquetting machine was introduced in details.
介绍了自行开发设计的一条连续型煤生产线的工艺过程和主要生产设备，重点介绍了对辊式型煤成型机的工作原理及结构特点。
The effects of coal from different mines and hot briquetting process parameters on the cold strength of CCB were investigated, as well as the mechanism of acquiring high strength of CCB.
本研究重点考察了煤种及热压工艺参数对热压含碳球团冷态强度的影响，并探讨了热压含碳球团获得高强度的机理。
An experiment and research on cold briquetting coke was conducted with anthracite coal blended with lean coal and fine coking coal and with residuum of modified coal tar oil as the binder.
对无烟煤配入瘦煤和焦粉，用改性焦油洗油残渣做黏结剂，制备冷压型焦进行了试验研究。
The effect of additive amount of biomass and fat coal, briquetting pressure, coal sizes distribution, heating velocity of the carbonization process on the strength of formed coke were examined.
研究了生物质配入量、肥煤配入量、成型压力、 煤料筛分组成、炭化加热速度对型焦抗压强度的影响。
Revealed material size-composition influence law to briquetting quality by study of granularity change of material briquetting and briquetting experiment of different size-composition of material.
通过对粉煤成型前后粒度的变化研究和不同粒度组成原料的成型实验，揭示了原料粒度组成对型煤质量的影响规律。
应用推荐