Obtained by chlorination of butyl rubber in hexane solution.
由丁基橡胶在己烷溶液中氯化制得。
Sulphur and compounds made from this process: i. e. Latex gloves, neoprene and butyl rubber.
制造过程中产生的硫及其化合物,如:橡胶手套、氯丁橡胶和丁基橡胶。
OBJECTIVE to investigate the effect of butyl rubber stopper on the stability of procaine hydrochloride injection.
目的研究丁基橡胶塞对普鲁卡因注射液稳定性的影响。
Butyl rubber which contains about 1% chlorine.
含约1%氯的丁基橡胶。
Through these the rubber may be vulcanized more readily than normal butyl rubber.
这种橡胶通过烯丙基氯可以比一般丁基橡胶更容易硫化。
This paper presents our study on the effect of fillers on mechanical damping of chlorinated butyl rubber above its glass transition temperature, Tg.
本文研究了填料对氯化丁基橡胶在玻璃化转变温度以上的温度范围里的力学阻尼行为的影响。
The market status, demands and applications of butyl rubber are analyzed, the market prospect in domestic is predicted.
对丁基橡胶市场、需求、应用情况进行分析,并对国内的市场前景进行了预测。
In this paper, absorbed dose, dose rate, and pretreatment methods on properties of reclaimed butyl rubber are studied.
本文研究了吸收剂量,剂量率和预处理方法对再生丁基胶物理性能的影响。
The paper discussed the effect of test conditions on measurement result of oxidables of butyl rubber bottle stoppers.
讨论试验条件对丁基橡胶抗生素瓶塞易氧化物测定结果的影响。
The present paper has prepared the butyl rubber sealant, and through changes padding to fill in completely studies the sealant each physical performance.
本论文制备了丁基橡胶密封胶,并通过改变其中的填料的填充量来研究密封胶的各种物理性能。
Melt flow properties and mechanical properties of sulfonated butyl rubber ionomers neutralized by different metallic cations and amines were studied.
研究了不同金属离子及胺中和的磺化丁基橡胶离聚体的熔融流动性及力学性能。
METHODS Halogenated butyl rubber stopper for injection was researched on different temperatures.
方法对注射液用卤化丁基橡胶塞在不同的温度下进行试验。
RESULTS AND CONCLUSION 1. The more higher the temperature was, the more unsolvable particles separate from the halogenated butyl rubber stopper for injection.
结果与结论1。试验温度越高,注射液用卤化丁基橡胶塞的不溶性微粒脱落就越多。
The synthesis and developing current situation of rubber accelerator TBBS and its material tertiary butyl amine were introduced.
介绍了橡胶硫化促进剂TBBS及其原料叔丁胺合成方法及开发现状。
Conclusion Products of qualified clarity and color can be obtained with domestic raw materials and 5 selected types of butyl rubber stopper in nitrogen blanketing process.
结论采用充氮生产工艺和国产的头孢呋辛钠原料以及5种筛选的丁基胶塞,可生产出澄清度和颜色合格的注射用头孢呋辛钠。
In this paper, we introduce the airproof principle of butyl chloride rubber and the factors related to the airproof.
介绍了氯化丁基橡胶气密性基本原理及影响气密性能的因素。
After all, gum's made from butyl rubber, the same stuff that goes into tires and basketballs.
毕竟,口香糖由丁基橡胶制成,丁基橡胶也是制作轮胎和篮球的材料。
Introduces the technical principle, test and research, processing sequence, technical property, market predetermination and finance evaluation of electron beam irradiating reclaimed butyl rubber.
介绍了电子束辐照再生丁基橡胶的技术原理,试验研究的情况,加工工艺流程,技术特点,以及推广前景,市场预测,财务评价等。
But now the compatibility between butyl rubber closures and drugs has not been solved, and the analysis methods for butyl rubber closures are limited.
但是目前丁基胶塞与药物的相容性问题仍未得到很好的解决,分析丁基胶塞的方法也很有限。
OBJECTIVE: to discuss the necessity of clearing the pharmaceutical butyl rubber stoppers for infusion bottles before use.
目的:探讨免洗丁基橡胶输液瓶塞使用前是否需要清洗。
The technical advantages and disadvantages of natural rubber liner, chloroprene rubber liner, precuring butyl rubber liner and room temperature self-vulcanization butyl rubber liner are compared.
对比了天然橡胶衬里、氯丁橡胶衬里、预硫化丁基橡胶衬里、室温自硫化丁基橡胶衬里的技术优缺点。
The results showed that the properties of 4 kinds of butyl rubber are similar, and IIR-1751 can absolutely be used to make inner tube of tyre.
结果表明,4种丁基橡胶产品的性能基本相当,IIR- 1751完全可以用于生产轮胎内胎。
Butyl rubber closures had replaced of natural rubber closures and had been applied in pharmaceutical packaging.
丁基胶塞已经逐步取代天然胶塞,在药品包装行业广泛应用。
This article introduces the major manufacturers and the major production methods of butyl rubber and halogenated butyl rubber at home and abroad.
本文介绍了丁基橡胶和卤化丁基橡胶国内外主要生产厂家及生产方法。
Its main material is the corners, butyl rubber, plastic, desiccant and sulfur.
其主要材料是铝间隔条、弯角栓、丁基橡胶、聚硫胶、干燥剂。
Its main materials are glass, aluminum stripes, butyl rubber, structural adhesive and desiccant.
其主要材料是玻璃、铝间隔条、弯角栓、丁基橡胶、结构胶、干燥剂。
The formulation of a hot-melt sealing adhesive for shrinkable materials is presented. The effects of stick agent, filler and butyl rubber on the properties of the adhesive are studied.
本文提出了一种用于热熔收缩材料的热熔密封胶配方,研究了增粘剂,填料、丁基橡胶对密封胶性能的影响。
The matching use of the butyl rubber and the polyisobutylene with different molecular weights facilitates the improvement of the strength and workability of the transparent butyl hot-melt sealant.
本发明采用不同分子量的丁基橡胶及聚异丁烯配合使用,利于提高透明丁基热熔密封胶的强度及施工性能。
The matching use of the butyl rubber and the polyisobutylene with different molecular weights facilitates the improvement of the strength and workability of the transparent butyl hot-melt sealant.
本发明采用不同分子量的丁基橡胶及聚异丁烯配合使用,利于提高透明丁基热熔密封胶的强度及施工性能。
应用推荐