The successful alternative was the cast-in-place segmental prestressed concrete box girder.
最后采用的方案是分段现浇的预应力混凝土箱形梁。
This paper introduces causation and prevention method of cast-in-place board crack in residence house.
本文介绍了现浇板裂缝产生的原因及其防治方法。
Then calculating methods on construction camber of cast-in-place beam scaffold and setting methods are introduced.
接着介绍了现浇梁支架的施工预拱度计算方法及设置方法。
The rock-socketed cast-in-place piles are one of the common foundation treatment methods under highrise buildings.
钻孔嵌岩灌注桩已成为高层建筑较常用的基础形式之一。
Movement and pressure of groundwater have great effects on quality of cast-in-place piles in special hydrogeological cases.
在特殊的水文地质条件下，地下水的运动及压力对灌注桩的质量影响十分显著。
The processing portions of the building are constructed of cast-in-place concrete with administrative offices framed in steel.
建筑的加工部分是钢结构的钢筋混凝土框架。
The structure is based on the cast-in-place pile pier, and three of the piers and pile foundation were calculated and checked.
下部结构采用以钻孔灌注桩为基础的三墩柱，并分别对桥墩和桩基础进行了计算和验算。
It introduces the current hazards of borehole cast-in-place concrete pile, analyses the reasons, and provides the preventions.
介绍了钻孔灌桩柱的常见病害，分析了导致病害及缺陷产生的原因，并针对具体问题提出了防治措施。
The cast-in-place pile is in general engineering deep foundation forms, pile quality plays a vital role to construction safety.
钻孔灌注桩是工程中常用的深基础形式，其成桩质量对工程安全有着至关重要的作用。
Beginning with several problems of cast-in-place construction management, this paper states the necessity of science management.
本文从现场施工管理的几个问题入手，阐明了科学管理的必要性。
The influence of end conditions on the load transfer behavior of cast-in-place pile is discussed using the load transfer method.
以荷载传递法为基础，研究了桩端条件对灌注桩荷载传递特性的影响。
The paper introduces the influence of mud proportion on the excavated hole, the hole cleamng of the cast-in-place and concreting.
介绍了泥浆比重对钻孔灌注桩成孔、清孔及混凝土灌注的影响，并提出相应的技术措施。
Combined with the actual work, the structure crack causes of cast-in-place reinforced concrete and prevention measures are discussed.
结合工作实际，针对现浇钢筋混凝土结构裂缝的产生原因与防治方法进行了论述。
The pile strain of AM bulb cast-in-place pile is tested by high precision sliding micrometer, which can have high precision and reliable testing results.
采用高精度滑动测微计测试AM扩底桩在各级荷载下的桩身应变，测试精度高，测试结果可靠。
The article analyzes some kinds of quality defects of cast-in-place hydraulic concrete, its harms, formation causes and puts forward concrete prevention measures.
对现浇水工混凝土质量缺陷的几种类型及其危害、产生原因进行分析并提出了具体的预防措施。
Through related examines calculated that unifies my unit related construction experience, definite cast-in-place box Liang full house support plan of construction.
通过有关检算，结合我单位有关施工经验，确定现浇箱梁满堂支架施工方案。
These measures are effective in construction of high quality main structure of cast-in-place framework house when we strengthen control the quality problem in our initiative.
施工过程中如果能加强对这些质量问题的主动控制，对现浇框架房屋主体结构的质量创优会有立竿见影的效果。
For the exterior cladding, the architect employed a range of materials, including cedar, natural stucco, steel and glass. Board-formed and cast-in-place concrete was also utilised.
对于建筑的外部表面，建筑师选择一系列的材料，比如雪松、自然灰泥、钢材和玻璃作为覆盖层。另外，还采用了加工成板状的和现场浇筑的混凝土。
Reasonable analysis and design of the cast-in-place edge girder in reinforced concrete floors taking into account effect of compatible torsion are desirable in engineering practice.
现浇钢筋混凝土楼盖边主梁考虑协调扭转的分析和设计方法是工程设计中有待进一步解决的问题之一。
This paper discusses the design method of adopting UEA compensation contraction concrete, without installing expansion joint in the entire cast-in-place framework of a college canteen.
本文论述了某高校食堂全现浇框架结构未设置伸缩缝，而采用UEA补偿收缩混凝土的设计方法。
The structural strength of the cast-in-place and assembly concrete can change with time. There are corresponding requirements for the concrete strength in different construction stages.
现浇或装配式混凝土结构强度随时间而变化，不同施工阶段对混凝土强度都有相应的要求。
Based on the practice, it analyses the performance and limitation of borehole cast-in-place concrete pile, and introduces the methods of quality test: especially the stress reflection method.
结合工程实例，分析了钢筋混凝土钻孔灌注的特点及常见缺陷。介绍了基桩质量检测的常用方法及反射波法检测钻孔灌注桩的基本原理、方法。
How to control the application of circulation materials and ensue the high quality of engineering became a main issue in high rise house with full cast-in-place shear wall construction at present.
在全现浇剪力墙高层住宅施工中，如何控制周转材料的使用并保证工程创优，成为目前项目施工中面临的一个主要课题。
The urethane liner is cast in place to form a continuous liner throughout the entire body, chest, packing chamber and flange face area.
氨基甲酸乙酯衬垫采用定点浇铸工艺，在整个阀体、阀腔、填料腔和法兰面区域表面形成全面连续的覆盖衬垫。
Gallery Three – the "black box" – has only a hint of natural light, integrated into and through the iris of the sandblasted eye pattern on the exterior cast in place concrete walls.
廊三- “黑盒子” -只是一个提示的自然光线，并通过纳入地方虹膜的外部投的格局喷砂眼睛混凝土墙。
The successful alternative was the cast - in - place segmental prestressed concrete box girder.
最后采用的方案是分段现浇的预应力混凝土箱形梁。
Through the comparison of cast in place concrete plate and precast hollow plate the advantages of cast in place concrete plate and the disadvantages of using precast hollow plate are pointed out.
在民用住宅砖混结构中通过现浇混凝土现浇板与预制空心板的对比，指出了现浇混凝土板种种优点和采用预制空心板在结构上和使用上的诸多弊端。
The cracking causes of cast in place concrete slab was discussed on three aspects: concrete materials, concrete slab construction and design. And some corresponding precautions are suggested.
从混凝土材料本身、施工、设计三个方面分析了混凝土现浇楼盖产生裂缝的原因，并提出了相应的预防控制措施。
The cracking causes of cast in place concrete slab was discussed on three aspects: concrete materials, concrete slab construction and design. And some corresponding precautions are suggested.
从混凝土材料本身、施工、设计三个方面分析了混凝土现浇楼盖产生裂缝的原因，并提出了相应的预防控制措施。
应用推荐