The vocabulary derives from inherent plasticity of cast-in-place concrete.
这归功于现浇混凝土固有的可塑性。
The identification and prevent of deform cracks of cast-in-place concrete floors;
介绍了现浇钢筋混凝土楼面板裂缝的成因及采取的主要预防措施。
Therefore, to optimize the design of the cast-in-place concrete hollow floor has great significance.
所以对现浇混凝土空心楼盖进行优化设计具有重要意义。
The processing portions of the building are constructed of cast-in-place concrete with administrative offices framed in steel.
建筑的加工部分是钢结构的钢筋混凝土框架。
It introduces the current hazards of borehole cast-in-place concrete pile, analyses the reasons, and provides the preventions.
介绍了钻孔灌桩柱的常见病害，分析了导致病害及缺陷产生的原因，并针对具体问题提出了防治措施。
This text makes use of a procedure of ANSYS to analysis the lading stress of the inclined crack of cast-in-place concrete slab first.
本文首先运用ANSYS有限元程序对荷载作用下板角应力进行分析。
The cast-in-place concrete Fabricated Hollow-ribbed floor is composed by the reinforced concrete beam, the rib beam and the hollow box.
现浇钢筋混凝土双向密肋空腔楼盖由空心箱体、现浇钢筋混凝土密肋梁、现浇钢筋混凝土框架梁构成，空心箱体与密肋梁同高。
This paper analyzes mechanism of crack development in cast-in-place concrete under combined action of concrete contraction and temperature difference.
分析现浇板因砼收缩和温差影响的组合作用裂缝的产生机理。
During the construction period, early deformation cracks are always prevalent for cast-in-place concrete members, which have not been effectively resolved.
现浇混凝土结构施工期间普遍存在早期变形裂缝问题，一直未能得到有效解决。
This paper introduces the construction technologies and key technical points for weak subgrade treatment with the thin cast-in-place concrete cylindrical piles.
重点介绍了采用现浇混凝土薄壁筒桩处理软基的施工工艺和技术要点。
An anti-floating construction method of a thin-walled hollow tube in a cast-in-place concrete hollow floor slab belongs to the technical field of residential construction.
一种现浇混凝土空心楼板薄壁空心管抗浮施工方法，属于住宅施工技术领域。
The project takes the form of an architectural cast-in-place concrete base upon which a floating sheet steel clad open-ended volume and an 8-4-16 masonry volume are situated.
该项目的形式是现浇混凝土基础的地方形成一个复合钢板浮动不限成员名额数量和体积均位于8-4-16砖石建筑。
Scope of application This technique is applicable to outdoor basic levels such as cement mortar, asbestos cement board, concrete prefabricated board and cast-in-place concrete.
适用范围本工艺适用于在水泥砂浆、石棉水泥板、混凝土预制板、现浇混凝土等室外基层上进行外墙漆施工。
To concrete used to test cast-in-place concrete project and prefabricated parts quality, forming method of specimen shall be the same as method adopted in practical construction.
的宜用捣棒人工捣实。检验现浇混凝土工程和预制构件质量的混凝土，试件的成型方法应与实际施工采用的方法相同。
Using cast-in-place concrete laminated construction to strengthen building floors can raise the bearing capauity of them and raise the anti-seismic capacity of the whole building.
现浇砼迭合层对建筑物楼板进行加固可提高楼面的承载能力和建筑物的整体抗震性能，在地震高发地区，与砼构造柱、圈梁组合是一种抗震加固的有效措施。
For the exterior cladding, the architect employed a range of materials, including cedar, natural stucco, steel and glass. Board-formed and cast-in-place concrete was also utilised.
对于建筑的外部表面，建筑师选择一系列的材料，比如雪松、自然灰泥、钢材和玻璃作为覆盖层。另外，还采用了加工成板状的和现场浇筑的混凝土。
Based on the practice, it analyses the performance and limitation of borehole cast-in-place concrete pile, and introduces the methods of quality test: especially the stress reflection method.
结合工程实例，分析了钢筋混凝土钻孔灌注的特点及常见缺陷。介绍了基桩质量检测的常用方法及反射波法检测钻孔灌注桩的基本原理、方法。
The successful alternative was the cast-in-place segmental prestressed concrete box girder.
最后采用的方案是分段现浇的预应力混凝土箱形梁。
The successful alternative was the cast - in - place segmental prestressed concrete box girder.
最后采用的方案是分段现浇的预应力混凝土箱形梁。
Gallery Three – the "black box" – has only a hint of natural light, integrated into and through the iris of the sandblasted eye pattern on the exterior cast in place concrete walls.
廊三- “黑盒子” -只是一个提示的自然光线，并通过纳入地方虹膜的外部投的格局喷砂眼睛混凝土墙。
The cracking causes of cast in place concrete slab was discussed on three aspects: concrete materials, concrete slab construction and design. And some corresponding precautions are suggested.
从混凝土材料本身、施工、设计三个方面分析了混凝土现浇楼盖产生裂缝的原因，并提出了相应的预防控制措施。
The article analyzes some kinds of quality defects of cast-in-place hydraulic concrete, its harms, formation causes and puts forward concrete prevention measures.
对现浇水工混凝土质量缺陷的几种类型及其危害、产生原因进行分析并提出了具体的预防措施。
Through the comparison of cast in place concrete plate and precast hollow plate the advantages of cast in place concrete plate and the disadvantages of using precast hollow plate are pointed out.
在民用住宅砖混结构中通过现浇混凝土现浇板与预制空心板的对比，指出了现浇混凝土板种种优点和采用预制空心板在结构上和使用上的诸多弊端。
This paper discusses the design method of adopting UEA compensation contraction concrete, without installing expansion joint in the entire cast-in-place framework of a college canteen.
本文论述了某高校食堂全现浇框架结构未设置伸缩缝，而采用UEA补偿收缩混凝土的设计方法。
Combined with the actual work, the structure crack causes of cast-in-place reinforced concrete and prevention measures are discussed.
结合工作实际，针对现浇钢筋混凝土结构裂缝的产生原因与防治方法进行了论述。
Reasonable analysis and design of the cast-in-place edge girder in reinforced concrete floors taking into account effect of compatible torsion are desirable in engineering practice.
现浇钢筋混凝土楼盖边主梁考虑协调扭转的分析和设计方法是工程设计中有待进一步解决的问题之一。
The successful alternative was the cast - in - place segmental prestressed concrete box girder .
最后采用的方案是分段现浇的预应力混凝土箱形梁。
This paper analyses some kinds of fissures in cast in place reinforced concrete beams and slabs, and puts up several methods for dealing with the fissures.
本文对现浇钢筋混凝土梁、板的几种裂缝产生的原因进行了分析，并提出处理方法。
After scheme comparison between cast in-place concrete pile method and FRANKI pile method, the FRANKI pile method has been confirmed finally.
通过对钻孔灌注桩和FRANKI桩两种地基处理方案的比选，最终确定采用FRANKI桩地基处理方案。
After scheme comparison between cast in-place concrete pile method and FRANKI pile method, the FRANKI pile method has been confirmed finally.
通过对钻孔灌注桩和FRANKI桩两种地基处理方案的比选，最终确定采用FRANKI桩地基处理方案。
应用推荐