Although there are a lot of the fabricating techniques of functionally gradient material (FGM), the centrifugal casting method is more effective, cheaper and easier to operate.
虽然梯度功能材料的制备方法很多，但效率较高、成本较低、操作较简单的方法是离心铸造法。
The technology of grinding ball by centrifugal casting, the rotational speed, the method for calculation of ingate area and factors influencing technological process were introduced.
介绍了离心铸造磨球的工艺，以及转速、内浇口断面积计算方法和影响工艺过程的因素。
The material of metal mould, the structure characteristics of a type connector metal mould and the influence on mould for centrifugal casting have been introduced.
本文介绍了适合于制作离心铸造用金属模的材料和A型接口金属模的结构特点及其对模具的影响。
Centrifugal casting, compact structure, free from pinhole porosity and slag, smooth surface and even wall thickness.
高速离心铸造，组织致密，无砂眼、夹渣，表面光滑、壁厚均匀。
The composite steel pipe made by the technology of SHS thermit centrifugal casting has excellent wear resistance and can be widely used in mines, electric power and building materials industry.
利用SHS铝热离心铸造技术制备的陶瓷内衬复合钢管具有优异的耐磨损性能，可广泛地应用于矿山、电力、建材等工业部门。
The centrifugal casting process of high aluminum-zinc alloys was investigated through products.
结合产品试验了高铝锌基合金的离心铸造工艺。
This paper discusses PLC control system formation, casting technical process and control theory of PLC in centrifugal casting iron pipe machine.
本文介绍了PLC控制系统组成、浇铸工艺流程、及PLC在离心球墨铸管机中的控制原理。
The reels have infinite anti-reverse, centrifugal casting brakes, and a solid aluminium body frame.
角子机具有无限反逆转，离心铸造制动器，以及坚实的铝制车身框架。
HCH-201 unsaturated polyester resin is designed for centrifugal casting molding glass pipe (HOBAS pipe) design of the structure layer resin is a low viscosity, medium reactivity of o-benzene resin.
201不饱和聚酯树脂是专门为离心浇铸成型玻璃钢管道(HOBAS管)设计的结构层树脂，是低粘度，中等反应性的邻苯型树脂。
In the light of application to centrifugal casting machine, working principle of soft starter is analyzed and the advantage of this new energy-saving technique of soft starter is presented.
分析软起动器的工作原理，结合在离心铸铝机的应用，阐明软起动器这种新型节能技术应用在三相异步电动机上的优越性。
Glass fibre reinforced plastic mortar pipe(Centrifugal casting process)is introduced to be as jacking pipe material used in the design and construction of one jack engineering project.
玻璃纤维增强塑料夹砂管（离心浇铸工艺）作为顶管管材运用于顶管工程中的设计、施工介绍。
It emphatically discussed the problems such as material selection, spheroidizing inoculation treatment, heat treatment, technological parameter control of centrifugal casting, etc.
着重论述了材质选择，球化孕育处理，热处理和离心铸造工艺参数控制等问题。
The corresponding measures should be adopted on raw material management, hot metal melting and centrifugal casting.
相应的应从原材料管理，铁水熔炼，离心铸造上采取控制措施。
Large diameter sleeve of steel casting by horizontal centrifugal casting machine has been introduced with discussion of technological measures of reducing pinhole and crack in sleeve.
本文主要介绍了卧式离心机铸造大直径铸钢套筒方法，讨论了降低套筒气孔和铸造裂纹的工艺措施。
The paper discussed the cause of cold model vibration in centrifugal casting, and provided the methods to reduce and avoid the vibration.
本文探讨了冷型在离心铸造过程中产生振动的原因，提出了减小和防止冷型在离心过程中振动的方法。
At last, cylinder of double spiral roller grinded-paste machine is produced by centrifugal casting.
最后，通过离心铸造生产出双螺旋辊式磨浆机筒体。
The problems of material selection, nodularizing and inoculation treatment and the technical parameter control of the centrifugal casting are mainly discussed.
着重论述了材质选择、球化孕育处理和离心铸造工艺参数控制等问题。
The casting methods include investment static casting and centrifugal casting.
铸造方法包括熔模静铸及熔模离心铸造。
The result showed that the centrifugal casting made the WC particles appear gradient distribution, the hardness of composites displayed gradual lower inward, and the transition zone was strengthened.
结果表明，离心铸造使WC颗粒呈梯度分布，硬度由表及里呈现逐渐降低的趋势，过渡区得到强化；
The design for operation characteristic mold of the centrifugal casting machine is to design the relevant craft course, choose the technics projects and technique requirements.
对开式离心铸造机模具设计是设计出相关的工艺过程，选择、确定工艺方案和技术要求。
In this papers, the composition of forging and rolling machine roll sleeve is scientifically designed, the centrifugal casting and heat treatment process of roll sleeve are researched.
对锻轧机辊环的化学成分进行了科学设计，对辊环的离心铸造工艺、软化退火工艺、淬火工艺和回火工艺进行了深入研究。
As a highly efficient and low-cost special casting method, horizontal centrifugal casting occupies a decisive position in material molding methods.
卧式离心铸造作为一种效率高、成本低的特种铸造方法，在材料成型方法中占有举足轻重的地位。
One of keys of production of centrifugal casting pipe of s. g. iron is continuous and fast delivery of qualified base iron with proper chemical composition and temperature.
应用离心铸造工艺生产球墨铸铁管，连续快速提供化学成分和温度均合格的优质铁液是生产的关键环节之一。
A method of dynamic action was used during the solidification of the alloy in centrifugal casting.
在离心浇铸金属凝固过程中，采用动态效应的方法对以达到细化晶粒的目的。
This paper introduced that horizontal centrifugal casting technology is used to develop the composite acicular spheroidal graphite cast iron collar for tension reducing mill of Baogang pipe mill.
介绍了采用卧式离心铸造技术，试制宝钢钢管轧机使用的复合针状球铁张减机辊环的过程。
Described in the article is the trial of the dual-liquid centrifugal casting process to produce clad tube with carbon steel as outer case and hi-chromium casting iron as inner case.
介绍了采用双液复合离心铸造工艺浇铸以碳钢为外套、高铬铸铁为内套的双金属套筒的工艺试验情况。
The high-Cr cast iron which is modified by 0.8% V-Fe is obtained by centrifugal casting and high cr iron microstructure and performance are discussed.
采用0.8%钒铁变质后的高铬铸铁，进行电磁离心铸造浇铸，研究高铬铸铁组织和力学性能变化。
The hardness and depth of chill layer on the roller outer surface can be raised with adding trace Bi into liquid Fe in centrifugal casting.
离心铸造时在铁水中加入微量的铋，可以提高滚筒外壳冷硬层的硬度和深度。
The results show that the greater casting thickness, rotating speed and radius of centrifugal casting are, the greater the filling ratio are.
试验结果表明，试样铸件厚度越大，离心半径越大，离心转速越高，铸件型壳的充填率越高。
The results show that the greater casting thickness, rotating speed and radius of centrifugal casting are, the greater the filling ratio are.
试验结果表明，试样铸件厚度越大，离心半径越大，离心转速越高，铸件型壳的充填率越高。
应用推荐