Evaluating cerebral blood flow autoregulation by critical closing pressure.
临界关闭压在脑血流动力学评价中的应用。
And we also introduce the construction of mold, the mechanism and construction of mold-closing pressure-increasing system, the feasibility of pressure adjustment.
对模具结构、合模加压系统的机理和结构作了介绍,讨论了压力调整的可行性。
Company engineers were due to begin pressure tests on the new cap late Tuesday, gradually closing its valves to shut down the flow of oil.
工程师们将于周二晚开始对这种新型防漏罩进行压力测试,并逐渐关闭其阀门以终止漏油。
Nor is there any great consumer pressure for longer shopping hours: many stores shut long before the legal closing time.
对于长时间的营业也没有什么很大的压力,很多商店在规定关门之前早就歇业了。
If you have a cut on your upper leg and you put pressure on it, you’re just closing that vessel.
如果你在大腿上有个伤口,你对伤口施压,那仅仅控制了那条血管的血液流动。
The SPRD is used on zone systems when the automatic closing of various zone dampers can create an excessive increase in air pressure and velocity throughout the duct system.
SPRD旁通阀是当各种区域风门自动关闭时用在区域系统中,可以在管道系统中增加空气压力盒速度。
The Spurs really cranked it up in the closing moments, some amazing pressure.
马刺在最后阶段真的全力去拼了,非常惊人的压力。
Quick closing valves, water hammer or supply pressure fluctuations can cause intermittent discharge.
迅速关闭阀门,水锤或供应压力波动可能导致间歇性排放。
Sheldon: or if the first door closing creates a change of air pressure that acts upon the second door.
或者一扇门关上时产生的空气压力作用于第二扇门引致…
Pressure limit switch circuit is cut off, stop, and then closing, the hook can only decrease.
压下限位开关,切断电路停车,再合闸时,吊钩只能下降。
If the changeover point of the above closing law is located in the S-shape effect zone, there is only one pressure peak.
若机组关闭规律不变而拐点位置已经进入反“S”区域,蜗壳进口压力将呈现为单峰形态。
The pulse width modulator SG3525 has been used in various areas for its functions such as locking for the lack of pressure, closing system fault, soft starting, delaying PWM drive and so on.
脉宽调制器SG3525具有欠压锁定、系统故障关闭、软起动、延时pwm驱动等功能,因而得到广泛应用。
Fluid Energy Controls surge Stop surge Suppressors are designed to dampen the pressure surges caused by rapid closing and opening of flow control valves in any liquid handling system.
浪涌电压抑制器用以抑制关闭和开启控制阀时产生的压力波动。
Secondly, if the two-segment closing law, the guide vanes close slowly first and then faster, only one pressure peak will be left.
当机组采用先慢后快的两段折线式导叶关闭规律时,蜗壳进口压力只有单峰。
The pressure supported by the entrance speedy accident sluice-gate in the process of closing the dynamic hydraulic pressure is the problem the designers pay close attention to.
闸门在动水关闭的过程中所承受的动水压力是设计人员十分关注的重要问题。
The pressure regulation valve, working without exterior energy, has the functions of pressure regulating, overflow closing, liquid temperature expansion relieving, and set pressure opening.
该阀不依赖外部能源工作,具有自动节流减压、泄漏超流自动截断、禁开、温升膨胀自动卸压和压力自动开启等多项功能。
To protect water hammer, the technologies of enlarging slow-closing time, prolongating closing distance of run and pressure relieving are adopted in this device.
为防止水击采用减缓关闭时间,拉长关闭行程和向外泄压等措施。
And it will include closing off the valves on that new containment cap so that they can take solid readings of the pressure inside of that containment cap and inside that well.
包括关闭新的控油罩上的阀门,这样他们就可以读取控油罩和油井内部压力的稳定数据。
The actual valve closing phases have been calculated, analyzed and determined in accordance with the interference signals caused by valve seating impulse in the low pressure indicator diagram.
计算分析了进排气门实际关闭相位,并根据低压示功图中气门落座冲击引起的干扰信号间接确定发动机运转时的实际关闭相位。
The water pressure at the entrance of draft tube rises in the process of load rejection, but the pressure behind the guide vanes drops rapidly following the closing of operation.
总体来说,尾水管进口断面水压在甩负荷过程中是升高的,而导叶后断面的水压随导叶关闭急剧下降。
Application Cavitation, liquid hammer and pressure peak may occur in hydraulic systems with changes in flow velocity, e. g. fast closing of a valve or pump starts and stops.
应用空化,液体铁锤和压力顶峰可能用在流动速度方面的变化在液压系统里发生,例如一阀门或者泵的快关闭起停。
The test result shows that the closing speed of the valve is not related to the pumping pressure, and the minor impacting energy is produced in the course of valve closing.
通过测试和分析,得出了泵阀关闭速度与泵压基本无关、泵阀关闭时的冲击能较小的结论。
Quick-opening closure is a common pressure-bearing component in pressure vessel. Quick-opening closure is often opened with pressure or boosted without closing the door resulting in kinds of accident.
快开端盖是压力容器中的一个常见的承压部件,快开端盖经常因带压开门或未关紧门升压导致各种事故。
Just press the button slightly and the machine will finish all process of lifting, closing, adding pressure, holding pressure, timing and descending.
自动控制,只需轻按一按钮,便可完成压板上升、闭合、加压、保压、计时、压板下降等整套程序。
Built-in pressure relief valve to protect the unit against any abuse from strong pressure or strong wind when closing the door.
内置减压阀,避免因外来强压或强风形态下闭门而成造地弹簧保护或漏油。
The pressurization of the servocontrol involves the opening of the pressure-line closing valve (2) and of the return-line closing valve (3).
进行压力伺服控制的正常过程包括,打开压力管路关闭活门和回油管路关闭活门。
The pressurization of the servocontrol involves the opening of the pressure-line closing valve (2) and of the return-line closing valve (3).
进行压力伺服控制的正常过程包括,打开压力管路关闭活门和回油管路关闭活门。
应用推荐