Abstract: This essay is based on the typical auman CTX-1 BJ1049V9JEA vehicle technical parameters and designs the diaphragm spring clutch for it.
摘要：本设计是以典型欧曼ctx - 1系BJ 1049v9jea汽车技术参数为依据，对其进行膜片弹簧离合器设计。
The friction force in the clutch works just like the blocks in the frication section of brake, except that the spring presses on the clutch plate instead of weight pressing the block into the ground.
离合器的摩擦力和制动器的摩擦力起一样的作用，不同的是压在地面上的重压力变成了离合器中弹簧压在离合器盘上的压力。
The amount of force the clutch can hold depends on the friction between the clutch plate and they flywheel, and how much force the spring puts on the pressure plate.
离合器能传递的力的大小取决于离合器盘和飞轮之间的摩擦系数，以及弹簧对压盘的压紧力的大小。
The optimum results showed that some laws of the strain energy of the spring in clutch engaging and disengaging change with structure and performance parameters of the spring.
优化结果表明，弹簧在离合器接合和分离过程中的变形能随其结构参数和性能参数有某种变化规律。
When the clutch pedal is pressed, a cable or hydraulic piston pushes on the release fork, which presses the throw-out bearing against the middle of the diaphragm spring.
当离合器踏板按下时，电缆或者液压活塞将推动离合器分离叉杆，离合器分离叉杆推着外伸的轴承贴在膜片弹簧的中间。
The test results on the centre actuated fan clutch with the shape memory spring set on the engine are presented.
本文介绍了形状记忆弹簧中央驱动式风扇离合器装于发动机的试验结果。
As the driver lets loose the clutch pedal, spring pressure increase on the clutch parts. Friction between the parts also increases.
一旦驾驶员松开离合器踏板，弹簧力就迅速作用在离合器上，摩擦力就随之增加。
Steering clutch: multiple-disc oil powder metallurgy disc compressed by spring. hydraulic operated. brake is oil two direction floating band brake operated by mechanical foot pedal.
转向离合器为湿式、多片粉末冶金摩擦片、弹簧压紧、液压分离。制动器为湿式、浮动、双向带式、脚踏式机械操纵。
Clutch spring, valve spring, spring for shock absorber, torsion bar for automotive seat, other kinds of high quality spring and key parts for automotive industry.
离合器弹簧、气门弹簧、减震器弹簧、汽车座椅扭力杆、其他各类汽车行业用高品质弹簧及关键部件。
The expanding self_energizing overrunning spring clutch is a new type of overrunning clutch.
扩张式自激超越弹簧离合器是一种新型离合器。
The tests of complete forklift truck shows that using diaphragm spring clutch in forklift truck is better than spiral spring clutch.
叉车整车试验表明在叉车上应用膜片弹簧离合器优于螺旋弹簧离合器。
Described the clutch diaphragm spring clutch, hydraulic remote operation, pneumatic servo booster.
膜片弹簧离合器，液压远距离操作，带气压伺服助力器。
Zhuji City, Jian-Ling Machinery Factory is a company specialized in production of auto parts such as manual valve, master cylinder, relay valve, clutch booster, air dryer and spring brake chamber.
诸暨市剑灵机械厂是一家专业生产手控阀、刹车总泵、继动阀、离合器助力器、空气干燥器、弹簧制动室等汽车配件的企业。
The membrane spring detector is a device used for detecting the dynamic characteristics of elastic element in the car clutch.
膜片簧检测机是用于检测汽车离合器中弹性元件力学特性的装置。
Compared with the prior art, the simulation system for the diaphragm spring of the clutch can simulate load resistance of different types of diaphragm springs of clutches.
相比于现有技术，本发明所提供的离合器膜片弹簧的仿真系统可以实现对不同类型的离合器膜片弹簧的负载阻力进行仿真。
There is no spring pressure on the clutch assembly parts. So there is no friction between the driving members and driven members.
离合器主动件、从动件上没有弹簧作用力，因此主动件和从动件之间也没有摩擦力。
Finally this paper points out that the pull-type diaphragm spring clutch is the third generation automotive clutch with a bright future.
最后指出，拉式膜片弹簧离合器是很有发展前途的第三代汽车离合器。
When a bolt of the impeller is dismantled, the impeller is popped upwards due to the elasticity of the spring, thereby the impeller is dismantled easily from a clutch shaft.
当拆下波轮的螺钉后，由于弹簧的弹力作用使波轮向上弹出，从而使波轮轻易拆离离合器轴。
The overload clutch is designed as a clutch combination consisting of a spring-loaded non-shiftable clutch with an additional flexible clutch.
设计上，过载保护离合器结合型离合器，由弹簧作用的不可调离合器外加弹性离合器组成。
The contraction self_energizing overrunning spring clutch is a new type of overrunning clutch.
扩张式自激超越弹簧离合器是一种新型离合器。
The invention relates to an automobile automatic clutch driving mechanism based on a volute compensation spring. Produced automatic clutch control systems are not formed in our country at the moment.
基于蜗卷弹簧补偿的汽车自动离合器驱动机构，我国目前还没有形成产品化的自动离合器控制系统。
Three types of clutch are the coil-pressure-spring type, diaphragm-spring type, and semi centrifugal type.
离合器的三种类型为：螺旋弹簧式，膜片弹簧式和半离心式。
An actuator including a motor, clutch, gear train, solenoid, clock spring, and air brake is provided.
提供一种包括电动机、离合器、齿轮系、螺线管、表簧及空气制动器的执行机构。
Because of the nonlinear elastic characteristic of membrane spring, it is difficult to achieve high precision in control of automat IC clutch of automobile.
膜片弹簧的非线性弹性特性给汽车离合器的高精度自动控制带来困难。
Abstract: the diaphragm spring is one of the important parts of the clutch, stamping by spring steel, in shape of a dish.
摘要：膜片弹簧是汽车离合器的重要部件，是由弹簧钢板冲压而成，形状呈碟形。
Some other types of torsion spring clutch are also described.
这里还介绍了扭簧式离合器的其他形式。
The plate springs of the spring-loaded clutch press the friction discs together.
弹簧离合器的板簧将摩擦片压紧在一起。
Steering clutch: multiple - disc oil powder metallurgy disc compressed by spring. hydraulic operated. brake is oil two direction floating band brake operated by mechanical foot pedal.
转向离合器为湿式、多片粉末冶金摩擦片、弹簧压紧、液压分离。制动器为湿式、浮动、双向带式、脚踏式机械操纵。
In this paper, the application and the mechanism principle of torsion spring overrun clutch are introduced.
介绍了扭簧式超越离合器的应用和机构原理。
In this paper, the application and the mechanism principle of torsion spring overrun clutch are introduced.
介绍了扭簧式超越离合器的应用和机构原理。
应用推荐