The coating material was ethyl cellulose.
包衣材料主要是乙基纤维素。
Non-volatile portion of the coating material.
涂料材料中非挥发的部分。
Non-volatile portion of the coating material.
涂料材料非挥发的部分。
The coating material of copolymer has good hardness and glossiness.
共聚物的涂膜具有较好的光泽度及硬度。
Coating material can be saved because of the thinness of the monolayer.
因为该单分子层的厚度可以节省涂覆材料。
At last, the methods of coating material and coating film thickness were expounded.
最后阐述了选择不同样品的镀膜材料与镀膜厚度的方法。
Antifog article, method for producing same, and coating material for forming antifog coating film.
防雾制品，其生产方法，和形成防雾涂布膜的涂布材料。
The bond strength of an iron-base coating material was measured and the validity of the method was proved.
以此测量了铁基涂层的结合强度，证明了方法的有效性。
The coating material the laboratory test and situation of field application of this technique are proposed also.
还介绍了涂料与这项技术的室内试验、现场应用情况。
This article presents the application of a new coating material(Sn Pb rare earth alloy)in the wire & cable industry.
介绍了一种新型金属涂层材料——锡-铅-稀土合金在电线电缆行业中应用。
The fourth, the methods in using immunization, laser and coating material to prevent caries are still being carried out in tests.
第四，关于免疫防龋，激光防龋，使用防龋涂料等，现仍在试验阶段。
The coating material, performance features, development process of the plug as well as its application results are presented.
介绍了该顶头的涂层材料、性能特征和研制工艺以及使用效果。
The coating layer hardness depends not only on the coating material, but also on the applied load and coating layer thickness.
涂层硬度不仅取决于涂层材料本身，同时还与试验负荷和膜层的厚度密切相关。
Resist: coating material used to mask or to protect selected areas of a pattern from the action of an etchant solder or plating.
阻剂：用来选择性保护某图形区域免受蚀刻剂，焊料或电镀影响的涂层材料。
METHODS The orthogonal design method was used to optimize coating material, coating weight, content of the porositymaking agent.
方法：采用正交设计以体外溶出为指标，对包衣材料种类、包衣剂用量、致孔剂用量进行处方筛选。
In order to obtain an optimum deposition condition a simple method to test PbTe coating material before its deposition is suggested.
为了得到薄膜的最佳沉积工艺条件，本文给出了检验碲化铅材料性质的简便方法。
Coating work may be rejected if the procedure used in applying the liquid-epoxy coating material does not comply with this standard.
业主也有权拒收不符合标准生产的涂塑产品。
The properties required for the coating material was analyzed according to the working conditions of KR desulfurizing hot metal ladle.
根据KR搅拌脱硫铁水罐的实际工作条件，分析了渣线防粘渣涂料的性能要求。
The dependence of optical properties of PbTe films on the deposition process and the characteristics of coating material is presented.
本文介绍碲化铅薄膜的光学性质和沉积工艺及其与原材料特性的关系。
The thermal insulation coating material was prepared by ultrafine processing in the ball mill using the natural sepiolite porous mineral.
将天然海泡石多孔矿物材料进行适当粒度的球磨加工，制成隔热涂料。
Metal heat protective coating material applies on each links of metal hot working-casting. Forging and heat treatment in different degree.
金属加热保护涂料在金属热加工各个环节——铸、锻、热处理中不同程度获得了应用。
In this study, Norfloxacin microcapsule was preparated by coacervation-phase seperation technique with acetylcellulose as coating material.
本文以醋酸纤维等为包囊材料，采用相凝聚法制备了氟哌酸微球。
This paper discusses the improvement of the quality of white board coating and the optimisation of the composition of the coating material.
本文对改进涂布白板纸质量及涂布配方的优选进行了探讨。
The slow-release character of the polymer-coated urea and the correlation between the slow-release property and coating material were researched.
重点研究了多组分聚合物树脂包膜尿素的缓释特性及其与膜材料之间的关系。
The study on the coating material has been made on basic material selection, additive and solution analysis, performance test and field application.
从这种防腐涂料的基料选择、颜填料及溶剂分析、性能试验及现场应用等几个方面进行了研究。
These arithmetics are applied to recognise information of erode features in coating material and compute erode feature parameter of coating material.
并利用这两种算法对镀层材料腐蚀特征信息进行识别，计算镀层材料的图像腐蚀特征参数。
The paper introduces in details the synthesizing process of the coating material and coating procedures on various fabrics with different coating head.
文章较为具体地介绍了该涂层剂的合成工艺及应用不同涂层头在各种纤维织物上进行涂层整理的工艺。
Minimum and maximum temperature limits for the coated surface and for ambient air shall be supplied by the coating material supplier and must be followed.
对涂层表面和环境空气的最大温度和最小温度的限制应当由涂层材料供应商提供，并应严格遵守。
Minimum and maximum temperature limits for the coated surface and for ambient air shall be supplied by the coating material supplier and must be followed.
对涂层表面和环境空气的最大温度和最小温度的限制应当由涂层材料供应商提供，并应严格遵守。
应用推荐