A method of analysing the gauge tolerance standards of cold-rolled steel sheet was put forward.
提出了一种对冷轧薄钢板厚度公差标准水平进行分析比较的方法。
The characteristics and forming reason of faint-sliver defect found in cold-rolled steel sheet were discussed.
对冷轧板中发现的条痕缺陷特征进行了分析，探讨了该缺陷的形成原因。
Capacitor shell adopts the high quality cold-rolled steel sheet or stainless steel sheet, and with mounting bracket for lifting on both sides which equipped with special grounding screw.
电容器外壳的材质采用优质冷轧钢板或不锈钢板，两侧装有供吊运安装支架，并装有专用的接地螺丝。
Process of rolling cold coils of pickled hot-rolled sheet through a cold reduction mill to make the stainless steel stronger, thinner, and smoother by applying pressure.
通过冷轧工厂轧制热轧的、酸洗的不锈钢薄板使不锈钢在压力作用下更薄、强度更高、更光滑。
The paper reviews the application of cold-rolled, hot-rolled steel sheet and round steels in the cab and chassis of domestic heavy truck, and discusses the methods to reduce automotive dead weight.
综述了国内重型汽车驾驶室和底盘用量较大的钢材——冷轧钢板、热轧钢板和圆钢在重型汽车上的应用现状，讨论和分析了降低汽车自重的途径和方法。
The effect of speed ratio on the texture of non-oriented cold rolled low silicon steel sheet was investigated after cross shear rolling at different speed ratios.
选取低硅无取向硅钢常化态板材，分别在不同速比下进行异步轧制，考察了速比对低硅无取向硅钢冷轧织构的影响。
Cold-rolled plate, galvanized sheet, hot-rolled plate, iron ore, pickling board, processing, steel, surface treatment, Pipe, 5600 yuan per ton.
冷轧板，镀锌板，热轧板，铁矿石，酸洗板，加工，钢铁企业，外表处置，钢管，每吨5600元。
The paper introduced the equipment, technology innovation and application situation of the domestic large-scale and high speed continuous annealing line for cold rolled silicon-steel sheet.
介绍了我国设计建设的大型高速冷轧硅钢片连续退火机组工艺及设备装备水平，技术创新及应用情况。
These housings (series p) are produced from cold rolled sheet steel and are protected against corrosion by a yellow chromate surface treatment.
这些轴承座(系列p)用冷轧钢板制造，表面经过黄色镀铬处理，以防腐蚀。
Series Y3 asynchronous motors is a new series of general purpose low voltage three-phase cage motors designed with cold-rolled silicon steel sheet.
Y 3系列异步电动机是采用冷轧硅钢片作为导磁材料而设计的一般用途低压三相笼型异步电动机基本系列。
The mass concrete construction method for the equipment foundation in BX steel POSCO cold rolled sheet plant and technical measures for controlling its crack development were introduced in this paper.
介绍了本钢浦项冷轧薄板厂大体积混凝土设备基础的施工方法，以及控制其裂缝开展的技术措施。
Is a professional production of cold-rolled plates, stainless steel plates, sheet of medium-sized companies.
是一家专业生产冷轧板、不锈钢板材、卷板的中型公司。
Effects of relevant manufacture techniques on cold rolled steel sheet performances are analyzed and the performance parameters which should be adopted for different automobile parts are advanced.
分析了相关制造工艺对冷轧薄钢板性能的影响，指出不同的汽车部件应采取的性能参数。
Based on analysis and study, this paper advances Suggestions and solutions to the problem about iron loss increasing of punched cold-rolled non-oriented silicon steel sheet after heat treatment.
针对冷轧无取向硅钢冲片在热处理后铁损值升高的问题进行了分析研究，并提出了解决措施和建议。
The effect of annealing temperature on fibrous texture of cold rolled IF steel sheet rolled from strip hot rolled in ferrite region was investigated.
研究了铁素体区热轧if钢经冷轧后，不同退火温度对丝织构的影响。
The effect of batch annealing process on the microstructure and mechanical properties of SPCCSD cold rolled steel sheet was studied under laboratory conditions.
在实验室条件下，研究了罩式退火工艺对SPCC- SD冷轧板组织和性能的影响。
Suitable for punching cold-rolled steel, silicon steel sheet etc.
适用于冷轧钢片、硅钢片等材料的冲压。
In sheet strips production, the requirement of glancing flatness for cold - rolled sheets i. e. automobile body sheet, tinned steel sheet, silicon steel sheet and aluminium sheet is higher.
在板带生产中，对汽车钢板、镀锡钢板、硅钢板以及航空铝板等冷轧薄板的平直度有很高的要求。
High cleanliness is required for low carbon aluminum killed (LCAK for short) steel which is widely used for production of cold rolled sheet.
低碳铝镇静钢(LCAK)常用于生产冷轧板，要求铸坯有高的洁净度。
The cause of linear surface defects on cold-rolled and galvanized steel sheet were analyzed.
采用宏、微观检验、扫描电镜观察和能谱分析等方法对冷轧和镀锌钢板表面缺陷进行分析。
Technology and installations for the production of cold rolled sheet at PZH Steel were introduced.
对生产中常见的低碳铝镇静钢冷轧板孔洞缺陷特征进行了宏观和微观分析。
The major work in the paper is the transform of the pickle curve-centering device of the Baosteel cold-rolled sheet-steel rolling mill.
论文对宝山钢铁股份有限公司冷轧薄板厂的酸洗弧形对中装置进行改造。
Technology characteristics of cold rolled sheet unit of Benxi Steel Posco Cold Rolled Co. , Ltd. ;
介绍了莱钢冷轧薄板（一期）工程的主要生产工艺、设备配置及先进技术。
It is hot-rolled or cold-rolled strip or sheet for the blank shape by the cold bending process after the high-frequency welding as a square cross-section made of steel shapes and sizes.
它是以热轧或冷轧带钢或卷板为坯料经冷弯曲加工成型后再经高频焊接制成的方形截面形状尺寸的型钢。
It is hot-rolled or cold-rolled strip or sheet for the blank shape by the cold bending process after the high-frequency welding as a square cross-section made of steel shapes and sizes.
它是以热轧或冷轧带钢或卷板为坯料经冷弯曲加工成型后再经高频焊接制成的方形截面形状尺寸的型钢。
应用推荐