Shape meter is the important equipment in the cold rolling production line. Its working result has great effect on the surface quality of the cold-strip steel.
板形检测装置是冷轧生产线上的重要设备，其工作效果对带钢表面质量有很大影响。
STRIP: Flat rolled steel used in the forming of cages. Hot or cold rolled to specified thickness, slit to specified widths and wrapped into coils.
钢带：卷起来用于加工保持架的带型钢材。通过热轧或冷轧达到一定的厚度，然后切割成一定的宽度并卷成钢带卷。
The morphology of the surface defects of cold rolled stainless steel strip aud the cause of formation of them have been reported.
本文阐述了不锈冷轧带钢表面缺陷的形貌及其成因，并根据形貌及产生原因归纳成六种表面缺陷。
The problem of the first importance in automatically controlling the profile and flatness of cold rolled steel strip is how to measure continuously on the irregularity of elongation in the strip.
冷轧带钢的板形平直度自动控制中，轧后带钢的不均匀延伸的在线连续检测是首要问题。
Stainless steel customers demanding stainless steel in a more finished state such as tubing, pipe, and cold-rolled strip from rerollers and tube makers.
不锈钢客户要求不锈钢的处理尽善尽美，如管子，来自于制管者及再轧机的冷轧带。
In recent years, there has been an ever growing market demand for cold rolled stainless strip steel.
近年来，不锈钢冷轧带钢市场需求日益增长。
Aiming at the characteristic in feature extraction of cold steel strip surface defect images, a mixed feature extraction method of separable criterion based on class distance is proposed.
针对冷轧带钢表面缺陷图像特征提取的特点，提出了基于类距离可分离性判据的混合特征提取方法。
The surface degree of finish of cold rolled stainless steel strip is controlled generally by surface roughness in production and the roughness lower the degree of finish higher.
在生产中，不锈冷轧带钢的表面光洁度一般用粗糙度进行控制，其粗糙度越低，光洁度越高。
This paper analyzes the reasons leading to uneven thickness of cold rolled strip steel, problems existing in AGC control system and component and application prospect of intelligent technique.
分析了冷轧带钢厚度不均产生的原因、A GC控制系统存在的问题及智能技术的构成和应用前景。
Through the analysis on production process of cold bend steel unit, the article give out reasonable strip steel deforming grape.
通过对冷弯型钢生产工艺分析，给出了合理的带钢变形图。
The shearing machine is one of the most popular single unit equipment in the production of cold rolled steel strip.
剪切机是冷轧带钢生产中使用最广泛的单机设备之一。
The cold narrow strip rolling line of Xinyu Iron and Steel Co. and the main performance of new added equipment are introduced.
简要介绍了新钢冷轧窄带钢生产线改造前的情况和改造后新增主要设备的性能。
Test of cold rolling welded ferritic stainless steel strip was carried out.
对铁素体不锈钢带焊接冷轧技术进行了试验研究。
Through adjusting the composition and optimizing process, low carbon steel strip for cold rolling has been developed successfully in CSP line.
介绍了包钢CSP厂通过成分调整和工艺优化，研究出适合冷轧生产的热轧低碳钢带生产工艺。
The paper describes the general situation of the Leveling and recoiling line, its features, elevation arrangement ect of the cold strip mill of tangshan Iron and Steel Co.
简要介绍了唐钢冷轧带钢拉矫重卷机组的总体情况、机组特点、立面布置等。
The effect of annealing temperature on fibrous texture of cold rolled IF steel sheet rolled from strip hot rolled in ferrite region was investigated.
研究了铁素体区热轧if钢经冷轧后，不同退火温度对丝织构的影响。
The high speed steel (HSS) as a roll material significantly increased the service life of hot and cold strip milling work rolls.
高速钢用作轧辊材料使冷、热带钢工作辊寿命得到大幅度提高。
The result shows that the unqualified cause of cold bending strip steel main is high oxygen content, high inclusion content, etc.
结果表明：钢中氧含量高、夹杂物多是导致带钢冷弯不合格的主要原因。
This paper expounds the shape classification of strip, analyzes the reasons why the shape wave occurs on the band steel in the cold rolling mill, and probes into the crown control of the band steel.
叙述了带钢的板形分类，分析了在冷轧厂生产中带钢板产生浪形的原因，探讨了带钢的凸度控制。
In this paper, the influencing factor of Continuous Annealing on the surface quality of cold rolled silicon steel strip is introduced.
本文介绍了连续脱碳退火机组对冷轧硅钢板带表面质量的影响因素，提出了连续脱碳退火机组提高冷轧板带质量的措施。
The severe corrosion of stainless steel fastening bolts on Electrolytic Galvanizing Line(EGL)in cold strip mill plant under current working conditions has been studied.
采用浸泡、电化学、模拟试验以及拉伸试验对冷轧厂电镀锌机组不锈钢紧固螺栓在现行工艺条件下遭受严重腐蚀进行了研究。
The traditional rolling force model of 4-stand tandem cold strip mill at Anshan Iron and Steel Corporation was analyzed, and some defects were found out.
分析了鞍钢冷轧厂4机架冷连轧机轧制力模型，指出了其存在的主要缺陷，并提出了改进方案。
Theoretical study on the rolling process with conical rollers has devel-oped a new field for rolling and other advanced cold working of strip steel.
锥辊辗轧理论的研究开拓了带材轧制和随后深加工的新领域。
Refers to the room temperature after cold, cold, cold, cold processing the steel plate or strip processing into various types of steel.
是指在常温下，经过冷拉、冷弯、冷拔等冷加工把钢板或钢带加工成各种型式的钢材。
The reduction rule of cold rolled narrow steel strip by usual method, It's rolled energy consumtion isn't the least usually.
按一般方法设计的冷轧窄带钢压下规程，轧制能耗不一定是最小的。
This paper also describes the successful application of optimized highly adaptive backup rolls on 4 stand tandem cold strip mill at Anshan Iron and Steel (Gr…
叙述了强适应性支撑辊在鞍钢冷轧厂四机架冷连轧机上的成功应用及取得的良好效果。
It is hot-rolled or cold-rolled strip or sheet for the blank shape by the cold bending process after the high-frequency welding as a square cross-section made of steel shapes and sizes.
它是以热轧或冷轧带钢或卷板为坯料经冷弯曲加工成型后再经高频焊接制成的方形截面形状尺寸的型钢。
The result shows that the unqualified cause of cold bending strip steel is high oxygen content, high inclusion content, etc.
结果表明，钢中夹杂物多和氧含量偏高是导致压扁断裂的主要原因。
It introduces the hardware and software design of control system in X-ray thickness gauge used in cold-rolled steel strip.
介绍了一种X射线冷轧测厚仪控制系统的硬件设计和软件设计。
It introduces the hardware and software design of control system in X-ray thickness gauge used in cold-rolled steel strip.
介绍了一种X射线冷轧测厚仪控制系统的硬件设计和软件设计。
应用推荐