Accurate measurement of the furnace temperature is an important topic for safety and stabilization of the furnace running and optimize the combustion process.
炉膛温度准确测量对于锅炉运行的安全、稳定以及燃烧优化有着很大的意义。
For HTAC (Hight Temperature Air combustion) technology, pressure control and pressure fluctuation during combustion switchover are very important to the furnace reliability and stability.
蓄热式燃烧技术中，炉压控制和换向时造成的炉压波动是一个非常重要的问题。
Heat and mass transfer process will not only affect the combustion temperature and gas distribution before the tuyeres but also affect the slag formation and pig iron quality in cylinder furnace.
其传热传质过程不但影响风口前的燃烧温度和煤气分布，而且还影响炉缸内渣铁的形成和生铁质量。
The fluidized bed is better than the grate furnace as a combustor since its diversity of fuel kinds, high efficiency of combustion and lower temperature of operation.
流化床燃烧方式和炉排炉燃烧相比具有燃料适应性广、燃烧效率高、运行温度低等优点。
This paper simulates the thermal process of a new style magnesium reduction furnace that has been developed with the technology of High Temperature Air Combustion (HTAC).
本文模拟计算了新设计开发的蓄热式金属镁还原炉的热过程。
A monitoring method based on visualized three dimensional temperature field of combustion in the furnace has been presented.
介绍了一种基于炉内燃烧三维温度场可视化的监测方案。
This paper introduces that it can resolve the problem of pollution that using high temperature low oxygen combustion so it can be used in some kinds of furnace.
采用高温低氧燃烧方法可解决污染问题，并且还可以用燃料不换向技术来进一步简化燃烧系统。
The igniter with multiple slit burner is characterized by its higher combustion efficiency, better adjustment of flame length, more rational temperature distribution in the furnace hearth.
多缝式烧嘴点火器具有燃烧效率高、火焰长度易调、炉膛温度分布合理等优点。
The intelligent combustion temperature control system is developed for the roasting process in the shaft furnace, in which operating conditions change frequently.
针对工况变化频繁的竖炉焙烧过程，采用智能控制方法设计了燃烧室温度智能控制系统。
The high blast temperature technology by top combustion preheating furnace preheating the intensifying combusted air is used for the hot stoves of New no. 2 and no. 3 BFs in Angang.
鞍钢新2号、新3号高炉热风炉应用了顶燃式预热炉来预热助燃空气的高风温技术。
It is confirmed that, the operation level of stoker boilers can be improved such as enhancing the combustion intensity, boiler thermal efficiency and flue gas temperature of furnace outlet.
证实了炉内增拱可较大的提高炉内燃烧强度，提高抛煤机锅炉的热效率和炉膛出口烟温。
During the simulation of the dynamic properties of regenerative high temperature air combustion system in coupled case, an industrial heating furnace model is selected as the physics model.
在对耦合工况下蓄热式燃烧系统的动力特性分析中，以一个工业用蓄热式加热炉为参考计算模型。
The high temperature combustion desulfurization possibility by fly ash remelting is study in vertical experiment cyclone furnace.
通过立式旋风炉实验台研究以飞灰重溶的方法解决高温燃烧固硫问题的可行性。
Based on the detail about the Characteristics of regenerative combustion, by the coal of the high temperature gasifying furnace, the regenerative reheating furnace is designed.
本文在详细分析蓄热式燃烧技术的基础上，利用高温气化炉产生的煤气，对蓄热式高温炉进行了设计。
The results prove that the movable heat insulate layer has obvious effects on improving the temperature profile in furnace and combustion efficiency of coal fired boiler at low load.
试验表明：可调卫燃带对改善锅炉低负荷时炉内温度分布及提高燃烧效率具有十分明显的效果。
Current research achievements in furnace temperature distribution visualization can provide the practical basis for the inspection and control of the combustion conditions in the furnace.
现有的炉膛温度场可视化技术研究成果为炉膛内部的燃烧的监测和控制提供实践基础。
Injecting blended pulverized coal combined with oxygen-enriched blast and enhancing wind temperature can notably improve the combustion properties of blast furnace pulverized anthracite injection.
大量富氧效果最为明显，比较而言，混合喷吹，辅以富氧及加入助燃剂能够显著提高煤粉的燃烧性能。
Based on the introduction to a new-type phosphoric furnace structure, an engineering method for calculating the theoretical combustion temperature and smog exhaust temperature was proposed.
在介绍新型燃磷塔结构的基础上，提出了计算其理论燃烧温度和烟气排放温度的工程方法。
The combustion control techniques for reheating furnace are in order to search the optimal air fuel ratio, to improve the control precision of the temperature and the velocity.
加热炉燃烧控制技术，就是在各种燃烧工况条件下，找到合理的最佳空燃比，以提高炉温控制精度和加热速度。
Numerical simulations about applying high temperature air combustion technology to rebuild a cell pit furnace were carried out.
系统研究了高温空气燃烧技术改造均热炉的各种方案。
Adopting high temperature of combustion air and relative large excess air ratio is an appropriate combustion mode for the furnace.
采用高温助燃空气和较大的过剩空气系数是一种较好的燃烧方式。
The experimental study of combustion of single COM droplet in the high temperature furnace and of COM spray in the tunnel furnace is introduced.
本文介绍了高温炉中的单颗COM液滴和在筒形燃烧室中的COM雾炬的燃烧试验结果。
Furnace body of compact construction may provide hot air in various temperature ranges to meet the needs of drying. industrial furnace, fluidized bed, combustion and heat tr...
该炉体结构紧凑，可提供不同温度范围的热空气以满足干燥、烘干的需要。
This paper briefly discusses the principle and characteristic of regenerative high temperature air combustion technology and introduces the design and operating circumstances of belt heating furnace.
针对特钢加热工艺的特殊性，介绍了蓄热式燃烧技术在特钢加热炉上的设计与应用。
Furnace body of compact construction may provide hot air in various temperature ranges to meet the needs of drying. industrial furnace, fluidized bed, combustion and heat transfer performances.
该炉体结构紧凑，可提供不同温度范围的热空气以满足干燥、烘干的需要。
The technology of blast furnace gas low temperature combustion and pipe still energy-saving and discharge reduction was studied in the paper.
本文对高炉煤气低温燃烧和管式炉节能减排技术进行了研究。
In the oil combustion, using top gun, the upper wind at a heat load of boiler blower gathered, part of the furnace temperature is high, reaching the ash melting point, resulting in boiler coking.
在投油稳燃时，运用上层油枪，使得上层一次风处热负荷会集，锅炉鼓风机部分炉温高，到达灰熔点，致使锅炉结焦。
Using a novel flame image processing technique, the 3-D temperature distributions of combustion in pulverized-coal-fired boiler furnace could be visualized experimentally.
本文的工作是在已有的研究基础上，对火焰的视频单桢连续采集处理系统做了进一步地研究与开发。
Using a novel flame image processing technique, the 3-D temperature distributions of combustion in pulverized-coal-fired boiler furnace could be visualized experimentally.
本文的工作是在已有的研究基础上，对火焰的视频单桢连续采集处理系统做了进一步地研究与开发。
应用推荐