The Apollo 9 Command module was called Gumdrop, on account of the blue cellophane wrapping in which the craft was delivered.
阿波罗9号的指挥舱被称为Gumdrop ，因为飞船是用蓝色玻璃纸包裹的。
Apollo 11 Command Module, named Columbia.
阿波罗11号指令舱，命名为哥伦比亚。
This is Columbia, the Apollo 11 command module.
这是哥伦比亚，阿波罗11号指令舱。
Engineers redesigned and rebuilt the Apollo command module.
工程师们重新设计并重新制造了“阿波罗”号指令舱。
Then they returned to the orbiting command module and started back to earth.
然后，他们返回绕月轨道上的指令舱，开始返回地球。
The following commands are run using the Portal WPSconfig configuration command module.
使用PortalWPSconfig配置命令模块运行以下命令。
The first example used the command module to run the find command and capture the output.
第一个示例使用命令模块运行find 命令，并捕获输出。
Two astronauts would ride in it from the orbiting command module to the moon's surface.
两名宇航员将从在轨道上飞行的指令舱乘载登月舱在月球着陆。
June: Command module pilot Michael Collins in the Apollo Mission Simulator at Kennedy Space centre.
6月20日：肯尼迪航天中心阿波罗登月模拟装置中的指挥舱领航员迈克尔·柯林斯。
A spacecraft that carries astronauts from the command module to the surface of the moon and back.
从指挥舱运送飞行员到月球的表面或背部的太空船。
Later, the landing vehicle would carry them back to the command module for the return trip to Earth.
然后，他们再乘坐登月舱返回指令舱，以返回地球。
His crewmates, Commander Frank Borman and Command Module Pilot Jim Lovell, followed with more verses.
他的同事，指令长法兰克·鲍曼和指令仓飞行员杰姆。罗凡尓接下去念了更多的词句。
Then they began to prepare to launch the lander for the return flight to the orbiting command module.
然后，他们开始准备发动登月舱起飞，返回正在绕月轨道上飞行的指令舱。
Michael Collins was the pilot of the command module vehicle, Columbia. He also had made a Gemini flight.
哥伦比亚号的指令舱驾驶员是迈克尔·柯林斯，他也曾成功进行“双子座”的飞行。
After a mission of 8 hours and 40 minutes, the command module splashed down in the Pacific north west of Hawaii.
指挥舱经过一次八小时又四十分钟的任务以后，在夏威夷西北的太平洋上降落了。
The three astronauts on the moon over the round, they passionately in stenosis of the command module of handshake.
三位宇航员在月亮上空会合了，他们激动地在狭窄的指令舱中紧紧地握手。
They walked briskly to the launcher, took the elevator to the command module, before entering the command module, the narrow.
他们健步来到发射架下，乘上电梯，来到指令舱前，进入狭小的指令舱。
While one of the astronauts went round the moon in the command module, the other went down to the surface in the lunar module.
当其中一名宇航员在指挥舱中环绕月球飞行时，另一名宇航员在登月舱中降落到月球表面。
The mission was commanded by John Young; Thomas K. Mattingly II was the command module pilot and Charles M. Duke, Jr. served as the lunar module pilot.
任务由约翰 杨指挥；汤姆斯K.马丁利二世任指挥舱飞行员；小查尔斯M.杜克任登月舱飞行员。
Spaceship commander Armstrong, command module pilot Corinth and lunar module pilot Aldrin Space Center canteen to eat breakfast, wearing a spacesuit.
飞船的指令长阿姆斯特朗、指令舱驾驶员科林斯和登月舱驾驶员奥尔德林在宇航中心的食堂里吃了早饭，穿上了宇航服。
Since the orbiter, the Command Module, had already been thoroughly tested, a decision was made in August 1968 to send Apollo 8 into lunar orbit instead.
由于轨道舱和指令舱已经全部测试完成，于是就决定在1968年8月先把阿波罗8号发送到月球轨道。
You don't really need a command module for this, but the memory is very limited. There is a small 100-byte buffer that holds the bytecode instruction stream.
在这种情况下，您并不需要一个命令模块，但是内存容量十分有限，其大小只有100个字节。
Finally, spacecraft commander Armstrong and NASA flight controllers agreed it was time to separate the lander module Eagle from the command module Columbia.
最后，飞船指令长阿姆斯特朗和美国国家宇航局的航天操控者们同意此时将登月舱“鹰”与哥伦比亚号的指令舱分离。
Armstrong and fellow astronaut Buzz Aldrin left the Apollo 11 command module (piloted by Michael Collins) in orbit and performed a landing in the lunar module Eagle.
阿姆斯特朗和同行的宇航员巴兹·奥尔德林(Buzz Aldrin)离开沿轨道运行的阿波罗11号指挥舱(由迈克·科林斯驾驶)，并乘坐“鹰”号登月舱实施了着陆。
Armstrong and Aldrin re-entered the lander. They rested for a while. Then they began to prepare to launch the lander for the return flight to the orbiting command module.
阿姆斯特朗和奥尔德林重新进入了登月舱，休息了一会儿，然后，他们为返回到月球轨道上的指令舱开始了启动登月舱的准备。
Each module was an arithmetical command such as add, subtract, multiply, cosine, sine.
每一个组件都是一种算数指令，诸如加、减、乘、余弦、正弦。
If the DB2 agent is upgraded after you backup the database and you want to use the upgraded module, specify the module with the DB2 restore command.
如果DB 2代理在备份数据库之后进行了升级，并且您希望使用升级后的模块，那么可以使用DB 2恢复命令指定该模块。
Listing 5 contains an example of a DB2 backup command using the DB2 agent module.
清单5包含一个使用DB 2代理模块的DB 2备份命令的例子。
Listing 6 contains an example of a DB2 restore command using the DB2 agent module.
清单6包含一个使用DB 2代理模块的DB 2恢复命令的例子。
The first command generates an executable module by linking the programs.
第一个命令通过将程序链接在一起生成了一个可执行模块。
应用推荐