The super battle droid requires no overriding command signal to operate, and thus has a limited degree of independence.
超级战斗机器人不再需要中央控制信号来运行，因此拥有某种程度的独立性。
The input interface includes an operating keyboard at least in order to inputting all kind of command signal into the equipment.
一输入界面，其中至少包含有一操作键盘，用以对该影像传真扫描装置输入各种操作信号；
The MCU and wireless remote control technology have been applied in the outlet, which has the ability of sending command signal and receiving device status signal in wireless way.
该插座综合应用了单片机技术和无线电遥控技术，具有无线电指令接收和状态返回的功能。
On the command line, you can achieve the equivalent through a series of pipes (using the KILL signal), as shown in Listing 5.
在命令行上，您可以通过一系列管道实现等效的功能（使用KILL信号），如 清单5 所示。
Under the contract, ITT will help boost command and control capabilities for Iraqi signal platoons and intelligence, surveillance and reconnaissance battalions, the Defense Department said this week.
国防部本周宣布，根据这份合同，ITT将帮助伊拉克信号排以及情报、监视和侦察排提高指挥和控制能力。
The key component to the command is the ability to identify running processes, extract the ones matching a given string, and use the kill command to send the KILL signal to each matching process.
该命令的关键部分是能够识别正在运行的进程，提取与给定字符串匹配的进程，并使用kill 命令将 KILL信号发送到每个匹配进程。
A request command is enclosed in the data or message section of the underlying network packet. It requests the contents of registers in the device containing signal data of a device.
底层网络包的数据或消息区域封装了一个请求命令，它请求设备中包含设备信号数据的寄存器的内容。
To use trap, you specify the command or function to be executed when the signal is trapped, and the signal number or Numbers that you want to trap, as shown here in Listing 13.
要使用跟踪，可以指定跟踪到信号时执行的命令或函数、要跟踪的信号编号，如此处的清单13中所示。
Powerfail: Only execute the command if init receives a power fail signal.
powerfail：只在init收到电源故障信号时执行命令。
Powerwait: Only execute the command if init receives a power fail signal, and wait until the process terminates before continuing to scan the inittab file.
powerwait：只在init收到电源故障信号时执行命令，并且等待进程终止后再继续扫描inittab文件。
You can view the key mappings that sends specific signal to a process using the "stty -a" command as shown below.
你可以如下所示使用“stty -a”命令查看给进程发送特定信号的键映射。
The ERR goes with the signal list within the trap command. In the following example, a non-existent file is copied, which invokes an error
ERR在trap命令中提供了一个信号列表。
The first trap command causes the stopsleep function to be run whenever a SIGCHLD, SIGINT, or SIGTERM signal is received.
第一个trap命令将使stopsleep函数在接受到SIGCHLD、SIGINT或SIGTERM信号时运行。
The signal SIGHUP forces xinetd to re-read its configuration and potentially close connections based on new parameters. The command to use is.
信号sighup让xinetd重新读取它的配置，并且根据新的参数，可能会关闭连接。
Advanced bash features (for example, epoch, functions, signal control, multiple extensions, command history, the means of using one-dimensional arrays) that give users much more power than before.
高级bash特性向用户提供比以前更强的能力(例如，纪元、函数、信号控制、多个扩展、命令历史、使用一维数组的方法)。
The xargs command then takes each process ID (since you used -l 1 to grab one line at a time), and USES sudo kill -hup to send each one a hangup signal.
然后，xargs命令接受每个进程ID(因为使用了- l1以便一次提取一行内容)，并使用sudokill -HUP向相应的进程发送一个挂起信号。
To view the current list of signals, use kill -l (the letter l) command. The list is presented in the form (signal number, signal name)
要查看当前信号列表，使用 -l （字母l）命令。
Traffic signals include traffic signal lamps, traffic signs, traffic line markings and the command of traffic policeman.
交通信号包括交通信号灯、交通标志、交通标线和交通警察的指挥。
When a signal is caught, the current command being executed attempts to complete before the trap command takes over.
在捕捉到信号后，正在执行的当前命令会尝试在trap接管之前结束执行。
When it comes time to name a behavior (add a command) we always give the command before we add a signal for the behavior.
当进行到给某个行为命名(加入口令)时，我们总是在发信号之前给出口令。
In training we help the dog with signals until we reach a point where we can stop using the signal and only use the command.
在训练中我们使用手势帮助狗，直到我们达到可以停止使用手势，仅仅使用口令的程度。
The encoding unit, composed of instruction buffer and command encoder, translates the 12-bit command code to 16-bit control signal, and ensures each part of the system to work steadily.
译码单元由指令缓存器和指令译码器构成，针对12位的指令代码翻译成16位控制信号，传送给处理器内部各个部件，用以保证各部件正常工作。
When we initially give a command we follow it with the signal we used to get the dog to perform the behavior.
当我们最初给出口令后，会跟着给一个手势，以便狗儿服从命令、作出动作。
When the dog will perform the behavior 8 out of 10 times with the signal you can start to add the command before the signal.
当狗儿随着信号作出动作8到10次的时候，我们可以信号之前加入口令。
It full USES of DSP chips for high speed and the advantages of command and MATLAB powerful numerical analysis, signal processing and graphics capabilities to calculate voltage flicker value.
它充分利用DSP芯片运算速度快和专用指令的优点以及MATLAB强大的数值分析、计算、信号处理及图形显示功能等来计算电压闪变值。
The ECM receives its load command from a variable voltage signal through a foot pedal sensor with IVS. It then translates this position command into a load percentage command.
ECM接收到一个带有IVS的油门踏板传来的代表负载命令的可变电压信号，它然后将这个位置命令其转换成一个负荷百分比命令。
Based on the designed PCI bus memory card, the signal definitions and command operations of PCI bus and the process of data access on the PCI bus are discussed in detail.
以自行开发的PCI总线存储卡为背景，详细论述了PCI总线的信号定义和命令操作，以及总线上的数据传输过程。
PCI bus is a popular computer bus presently. The character, signal, command and transfer protocol, configuration of PCI bus were introduced in this article.
PCI总线是目前流行的计算机总线。文章介绍了PCI总线的特点，描述了PCI总线的信号、命令、传输协议与PCI总线的配置空间。
Digital Transmit command. The command response to the capabilities identified by the DIS signal.
数字化传输命令：该命令对由DIS信号识别的功能进行响应。
In order to satisfy this requirement, the complex signal lines are usually used to detect the speed and position of each motor and to command the desired speed and position.
为了满足这个要求，检测每个电机的速度和位置数据以及传送指令都需要大量复杂的数据信号线。
应用推荐